Truetone 1 Spot Pro CS6 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Truetone 1 Spot Pro CS6 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.Truetone.com
IMPORTANT SAFETY INSTRUCTIONS
1. All the safety and operating instructions should be read before this
product is operated. Keep these instructions for future reference.
2. Pay attention to all warnings on the power supply and in the operating
instructions.
3. WARNING: Do not use this device near water or any other liquid.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not use this device near any heat sources.
7. Do not remove the power plug grounding pin on the input cable.
8. Protect all input and output power cables from being walked on or
pinched.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the brackets and screws provided with this power
supply.
11. Unplug this device during lightning storms or when unused for long
periods of time.
12. Refer all repairs to qualified personnel at Truetone or an authorized
Truetone distributor. Under no circumstances should the power
supply be opened by the user.
13. This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
- WARNING: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the
appliance.
14. The maximum ambient temperature should not exceed 35 degree C.
15. Date code: YYMM, YY means year, MM means month. For example:
1612 represents Year 2016, December.
Owners Manual
CS 6 - pure isolated power
PRO
- 7 -
Need some great pedals to go
with your 1 SPOT Pro?
Check out Truetone pedals at
Truetone.com
Mounting your 1 SPOT Pro
CS6
under
or
on top of a pedalboard
The 1 SPOT Pro CS6 comes with three screws inserted into mounting screw
holes on the top of the unit (spare screws are also included). These are for
mounting your CS6 under pedalboards like those from Pedaltrain
®
. Just use
the drill template included with your new CS6, to drill mounting holes under
your pedalboard.
You can also mount your CS6 on top of any pedalboard, using Velcro
®
. The
low-profile design of the CS6 makes it an excellent pedal riser, enabling you
to put pedals on top of it.
Please see the 1 SPOT Pro CS6 Mounting Guide video on Truetone.com,
for complete instructions and ideas on how to mount your CS6.
- 1 - - 6 -
The bottom panel of the 1 SPOT Pro CS6 contains 4 mini-switches that change
the voltage of outputs 3-6. The switches are in the same order as the outputs.
Switch 1: Output 3 – Off=9Vdc; On=18Vdc
Switch 2: Output 4 – Off=9Vdc; On=18Vdc
Switch 3: Output 5 – Off=9Vdc; On=12Vdc
Switch 4: Output 6 – Off=9Vdc; On=12Vdc
Note: Output numbers are not marked on actual unit.
Voltage Input:
The 1 SPOT Pro CS6 can be used anywhere in the world without the use of a
step-up or step-down transformer. It transforms wall voltage from 100-240Vac,
and converts it into the stated voltages on the bottom panel of the unit.
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every
pedal that you are going to power via the 1 SPOT Pro CS6, you need to know the
following:
1. What is the voltage required by the pedal?
2. Does the pedal require AC or DC voltage? (Hint: battery = DC)
3. What is the polarity of the pedal? (Center pin positive or negative.)
These questions can usually be answered by:
1. Inspecting the pedal itself near the power jack.
2. Referring to the owner’s manual.
3. Checking online, or contacting the manufacturer.
4. If your pedal can be powered by a 9Vdc battery, it can be powered by one
of the 9Vdc outputs (exception being the Boss ACA pedals, see below).
Notes on certain pedals:
ď‚· Some older Boss pedals require 12Vdc, yet can be powered by a 9Vdc
battery. They will indicate “Use ACA adaptor” near the power jack. To
power an ACA pedal please use outputs 5-6, and set to 12Vdc on the DIP
switch for the corresponding output. Modern Boss pedals will indicate
“PSA,” and can be powered by any of the 1 SPOT Pro CS6’s 9Vdc
outputs.
ď‚· Many germanium based fuzzes and Octavia-style pedals will require the
use of the CYR adaptor to reverse the polarity to center pin positive.
Congratulations on your purchase of the 1 SPOT Pro CS6 Power Supply by
Truetone! The 1 SPOT Pro CS6 provides 6 outputs to power just about any
effect pedal. All 6 outputs are completely isolated, regulated, and filtered to
provide quiet and safe operation for your valuable effects pedals.
The 1 SPOT Pro CS6 contains the following in the package:
1 SPOT Pro CS6 Power Supply
IEC input power cable
(3) mounting screws, (3) spare mounting screws and (1) drill template
Output power cables (all are center pin negative polarity):
(1) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple
(1) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue
(1) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
(1) MC2: Two 5.5x2.1mm barrel plugs with 5.5x2.1mm input socket
Converter Plugs:
(1) CL6 – Green – for Line 6 DL4/M9/etc. and some Eventide pedals.
(1) CYR – Red – reverse polarity converter
(1) C35 – Black – 3.5mm (1/8”) plug converter
(1) CBAT – Black battery clip
Specifications of the 1 SPOT Pro CS6:
Input: 100-240V~, 50/60Hz, 0.55A (Worldwide input voltage)
Outputs: 6 Outputs are marked on the bottom of the CS6:
Note: This symbol indicates DC voltage.
Output 1
- 3 - - 4 -
Output 2
Output 3
Output 4
Output 5
Output 6


Product specificaties

Merk: Truetone
Categorie: Niet gecategoriseerd
Model: 1 Spot Pro CS6

Heb je hulp nodig?

Als je hulp nodig hebt met Truetone 1 Spot Pro CS6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Truetone

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd