True Stryker Slat TC1-SA-35 Handleiding

True Niet gecategoriseerd Stryker Slat TC1-SA-35

Lees hieronder de 📖 handleiding in het Nederlandse voor True Stryker Slat TC1-SA-35 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
DECLINE KIT FOR
VAPOR STRYKER SLAT TREADMILL
ASSEMBLY INSTRUCTIONS
IMPORTANT—READ CAREFULLY
FOR IMPORTANT SAFETY INFORMATION AND DOWNLOAD OF
THE COMPLETE TC1-SA-35 OWNER’S MANUAL AND ASSEMBLY GUIDE SEE
TRUEFITNESS.COM OR SCAN THE QR CODE ABOVE FOR DIRECT ACCESS
IF YOU NEED IMMEDIATE ASSISTANCE PRE OR POST ASSEMBLY
CONTACT OUR SUPPORT TEAM MONDAY–FRIDAY 8:30AM–5:00PM (CST)
800.883.8783 | SERVICE@TRUEFITNESS.COM
MODEL 00604500-35
TC1-SA-35 DECLINE KIT REV00
2
Use caution when assembling the equipment.
Unpacking and assembling of this product is a two person task.
!CAUTION:
Use caution when unpacking this product. Avoid damage to the product.
DO NOT use a box cutter. DO NOT slice into the packaging.
VERIFY BOX CONTENTS
IMPORTANT! Please verify box contents. If you have
questions, or if there are any missing parts, contact product
support (service@true tness.com | 800.883.8783).
BOX CONTENTS
ITEM PART DESCRIPTION QTY
1 ST1046 DECLINE FEET 2
2 ST1171L END CAP BRACKET, DECLINE FEET, LEFT 1
3 ST1171R END CAP BRACKET, DECLINE FEET, RIGHT 1
4 FE0090 LOCK WASHER, M10 4
5 ST1139 HHS, M10-1.5 X 20MM 4
6 TI0065 BHCS, M5-0.8 X 15MM, BLUE NYLOC 4
7 MANUAL ASSEMBLY INSTRUCTIONS 1
1
2
3
4
5
6
7
ASSEMBLY INSTRUCTIONS
NOTE: Supplemental video available @TRUEFitnessservicevids:
https://www.youtube.com/playlist?list=PLr3Igv32UrupdGovHVj-zecgk9kvFdC2h
PREASSEMBLY CHECKLIST
TOOLS NEEDED FOR ASSEMBLY INCLUDED
IN BOX
#2 Phillips Screwdriver NO
Ratchet Wrench with 5/16” (or 8mm)
and 17mm Socket and Extension
(optional but recommended)
NO
17mm Wrench NO
3
Tools Used in this Step
#2 Phillips
Screwdriver
ASSEMBLY STEPS
Step 1—Remove Right and Left Front and Rear Roller Covers
A. Remove and set aside the two M5-0.8 X 15MM screws securing the power cord closure.
B. Remove and set aside the two M5-0.8 X 6MM screws securing the power cord retainer.
C. Disconnect the power cord.
D. Remove and set aside the 16M5-0.8 X 15MM screws securing the left and right rear roller covers.
B
C
A
D


Product specificaties

Merk: True
Categorie: Niet gecategoriseerd
Model: Stryker Slat TC1-SA-35

Heb je hulp nodig?

Als je hulp nodig hebt met True Stryker Slat TC1-SA-35 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd True

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd