Tripp Lite SR25UBSD3 Handleiding

Tripp Lite Server SR25UBSD3

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SR25UBSD3 (12 pagina's) in de categorie Server. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

SmartRack® Enclosures

(Series Numbers: AG-039A, AGAC7006, AGAC7761,

AG-0324, AG-00BE, AG-0325, AGAC7454, AG-0534, AG-0535, AG-0536, AG-076F)

Owner’s Manual

Important Safety Instructions 2

Overview 3

Feature Identification 4

Enclosure Installation 5

Preparation 5

Unpacking 5

Placement 6

Leveling 7

Ground Connection 7

Enclosure Configuration 8

Adding or Removing Front and Rear Doors 8

Reversing Front Door 8

Adding or Removing Roof Panel 10

Adding or Removing Side Panels 10

Adjusting Mounting Rails and Cable Management Rails 11

Combining (Baying) Enclosures 12

Equipment Installation 12

Installing or Removing Cage Nuts 13

Specifications 14

Storage and Service 16

Warranty and Product Registration 16

Español 17

Français 33

Русский

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

All sections of this manual contain instructions and warnings that should be followed during the installation and use of the SmartRack Enclosures

described in this manual. Read all instructions and warnings thoroughly before attempting to move, install or use the SmartRack Enclosures

described in this manual. Failure to comply will create a risk of personal injury and property damage and may invalidate the warranty.

• Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover or insert objects into the external ventilation

openings of the enclosure.

• The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container.

• Do not place any object on the enclosure, especially containers of liquid, and do not attempt to stack the enclosures.

• Inspect the shipping container and the enclosure for shipping damage. Do not use the enclosure if it is damaged.

• Leave the enclosure in the shipping container until it has been moved as close to the final installation location as possible. The casters are designed

for minor position adjustments within the final installation area only. The casters are not designed for moving the enclosure over longer distances.

• The casters are not designed to provide long-term support for the enclosure after final installation. Use the levelers to provide long-term support.

• Install the enclosure in a structurally sound area with a level floor that is able to bear the weight of the enclosure, all equipment that will be installed

in the enclosure and any other enclosures and/or equipment that will be installed nearby.

• Install the cabinet securely to the building structure, using the shipping brackets as illustrated in the section of this manual.Enclosure Installation

• Do not push the enclosure from the side panels to move it. Pushing from the side panels will cause a tipping hazard.

• When rolling the enclosure on its casters, always push it from behind, never pull it toward you.

• A rolling enclosure can cause personal injury and property damage if not properly supervised. If rolling the enclosure down a ramp is required, use

extreme caution. Do not attempt to use ramps that have a slope steeper than 1:12.

• Use caution when cutting packing materials. The enclosure could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage

that will void the warranty.

• Do not re-ship the enclosure with additional equipment unless the enclosure was shipped with a special shock pallet (“SP1” models only). The

combined weight of the enclosure and installed equipment must not exceed the load capacity of the pallet. Tripp Lite is not responsible for any

damage that occurs during re-shipment.

• DANGER: STABILITY HAZARD, RACKS ARE TO BE INSTALLED BY QUALIFIED SERVICE PERSONNEL ONLY.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Overview

SmartRack Enclosures accommodate all standard 19-inch rackmount equipment, regardless of vendor, and ship fully assembled for quick and easy

deployment. They feature adaptable, heavy-duty cabinets in 24U, 42U, 45U, 47U and 48U heights, with or without side panels. Several models are

available with an integrated shock pallet that allows resellers, integrators and enterprise customers to pre-configure equipment and re-ship the

enclosures to the final installation site.

SmartRack Enclosures have variable mounting depths, ideal for servers. Integrated baying hardware enables cost-effective, orderly and efficient

expansion. The cabinets include quick-release doors and side panels for convenient maintenance and split rear doors for improved access and

reduced clearance requirements. Front access doors are reversible for installation flexibility. Front and rear doors and side panels are lockable.

Available SmartRack Enclosures

Model # Rack Height Side Panels Shock Pallet

SR24UB 24U NoYes

SR24UBEXP 24U No No

SR24UBEXPSP1 24U No Yes

SR24UBSP1 24U Yes Yes

SR25UB 25U Yes Yes

SR42UB 42U NoYes

SRX42UB* 42U NoYes

SR42UBCL 42U NoYes

SR42UBDP 42U NoYes

SRX42UBDP* 42U NoYes

SRX42UBDPEXP* 42U No No

SR42UBDPWD 42U NoYes

SRX42UBDPWD* 42U NoYes

SRX42UBDPWDEXP* 42U No No

SR42UBEXP 42U No No

SRX42UBEXP* 42U No No

SR42UBEXPND 42U No No

SR42UBEXPSP1 42U No Yes

SR42UBSP1 42U Yes Yes

SR42UBWD 42U NoYes

SRX42UBWD* 42U NoYes

SRX42UBWDEXP* 42U No No

SR42UBWDCL 42U NoYes

See the section for more information. Specifications

*SRX-Series SmartRack Enclosure

Model # Rack Height Side Panels Shock Pallet

SR45UB 45U NoYes

SRX47UB* 47U NoYes

SRX47UBEXP* 47U No No

SRX47UBDP* 47U NoYes

SRX47UBDPEXP* 47U No No

SRX47UBWD* 47U NoYes

SRX47UBWDEXP* 47U No No

SRX47UBDPWD* 47U NoYes

SRX47UBDPWDEXP* 47U No No

SR48UB 48U NoYes

SR48UBCL 48U NoYes

SR48UBDP 48U NoYes

SR48UBDPEXPND 48U No No

SR48UBDPWD 48U NoYes

SR48UBEXP 48U No No

SR48UBEXPSP1 48U No Yes

SR48UBSP1 48U Yes Yes

SRX48UBDPWD 48U NoYes

SRX48UBDPWDEXPND

48U No No

SRX48UBWD 48U NoYes

SRX48UBWDEXPND 48U No No

SR50UB 50U NoYes

SR52UB 52U NoYes

SR52UBDP 52U NoYes

SR55UB 55U NoYes

Product specificaties

Merk:	Tripp Lite
Categorie:	Server
Model:	SR25UBSD3
Kleur van het product:	Zwart
Gewicht:	86180 g
Breedte:	600.2 mm
Diepte:	828 mm
Hoogte:	1270 mm
Gewicht verpakking:	99790 g
Breedte verpakking:	660.4 mm
Diepte verpakking:	870 mm
Hoogte verpakking:	1422.4 mm
Soort:	Vrijstaande rek
Land van herkomst:	China
Maximale gewichtscapaciteit:	1361 kg
Certificering:	UL60950, RoHS, CE
Snelle installatiehandleiding:	Ja
(Buitenste) hoofdverpakking hoogte:	1422.4 mm
(Buitenste) hoofdverpakking breedte:	660.4 mm
(Buitenste) hoofdverpakking brutogewicht:	99790 g
(Buitenste) hoofdverpakking lengte:	870 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	25U
Code geharmoniseerd systeem (HS):	8517.79.0000
Zwenkwieltjes:	Ja
Sleutelsleuf:	Ja