Tripp Lite SmartPro SMART750USBTAA Handleiding

Tripp Lite UPS SmartPro SMART750USBTAA

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartPro SMART750USBTAA (24 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

Owner’s Manual

1111 W. 35th Street Chicago, IL 60609 USA

Customer Support: (773) 869-1234 • www.tripplite.com

Important Safety Instructions 2

Quick Installation 3

Basic Operation 4

Storage & Service 7

Warranty Registration 7

SmartPro®USB UPS Systems

®is a registered trademark of Tripp Lite.

Español 8

Français 16

WARRANTY

REGISTRATION:

chance to win a FREE Tripp Lite

product—www.tripplite.com/warranty

Not suitable for mobile applications.

200609033 93-2616 SMARTUSB UPS OM.qxd 9/14/2006 3:01 PM Page 1

Important Safety Instructions

UPS Location Warnings

• Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.

• For best performance, keep the indoor temperature between between 32º F and 104º F

(0º C and 40º C).

• Leave adequate space around all sides of the UPS for proper ventilation.

UPS Connection Warnings

• Connect the UPS directly to a properly grounded AC power outlet. Do not plug the UPS

into itself; this will damage the UPS.

• Do not modify the UPS plug, and do not use an adapter that would eliminate the ground

connection.

• Do not use extension cords to connect the UPS to an AC outlet. The warranty will be

void if anything other than Tripp Lite surge suppressors are used to connect the UPS

to an outlet.

• If the UPS receives power from a motor-powered AC generator, the generator must

provide clean, filtered, computer-grade output.

Equipment Connection Warnings

• Do not use Tripp Lite UPS Systems for life-support applications in which a malfunction

or failure of a Tripp Lite UPS System could cause failure or significantly alter the

performance of a life-support device.

• Do not connect surge suppressors or extension cords to the output of the UPS. This may

damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

• The UPS does not require routine maintenance. Do not open the UPS for any reason.

There are no user-serviceable parts inside.

• Batteries can present a risk of electrical shock and burns from high short-circuit current.

Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the

UPS or batteries. Do not short or bridge the battery terminals with any object. Use tools

with insulated handles. Battery replacement should be performed only by authorized

service personnel using the same number and type of batteries (Sealed Lead-Acid). The

batteries are recyclable. Refer to your local codes for disposal requirements or in the

USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit

www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS

System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at

www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery

for your UPS.

• Do not attempt to add external batteries.

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the

installation, operation and storage of this product. Failure to heed these warnings will

void the warranty.

200609033 93-2616 SMARTUSB UPS OM.qxd 9/14/2006 3:01 PM Page 2

Quick Installation

Connect the UPS to

an electrical outlet.

Make sure the outlet does not share a circuit

with a heavy electrical load such as an air

conditioner or refrigerator.

Plug a computer, monitor

and/or other equipment into

the UPS system.

The UPS is designed to support only

computer equipment. Connecting high power

draw equipment such as household appliances

or laser printers to outlets providing UPS

battery backup will overload the UPS. Special

outlets (clearly labeled on the rear panel)

provide surge-only (not battery backup)

protection designed for laser printers and

other high power draw equipment.

“UPS/Surge” receptacles are used to provide

connected equipment with AC line power

during normal operation and battery power

during blackouts and brownouts. They also

protect equipment against damaging surges

and line noise. Connect the computer and

monitor to the “UPS/Surge” receptacles.

Select UPS Operating Mode.

Press the ON/OFF button to toggle the UPS

between the ON (“ ” LED lit) and the OFF

(“ ” LED not lit) modes.

NORM DELAY

200609033 93-2616 SMARTUSB UPS OM.qxd 9/14/2006 3:01 PM Page 3

Product specificaties

Merk:	Tripp Lite
Categorie:	UPS
Model:	SmartPro SMART750USBTAA
Kleur van het product:	Zwart
Gewicht:	9100 g
Breedte:	133 mm
Diepte:	190 mm
Hoogte:	273 mm
Snoerlengte:	1.8 m
Gewicht verpakking:	10000 g
LED-indicatoren:	Ja
Vormfactor:	Tower
Afmetingen verpakking (BxDxH):	216 x 267 x 356 mm
Aantal USB 2.0-poorten:	1
Certificering:	TAA
Geluidsalarm(en):	Ja
Duurzaamheidscertificaten:	RoHS
Uitgangsvermogen:	450 W
Temperatuur bij opslag:	-15 - 50 °C
Frequentie:	60 Hz
Modem (RJ-11) poort:	2
Efficientie:	95 procent
Bedrijfstemperatuur (T-T):	0 - 40 °C
Aantal AC uitgangen:	6 AC-uitgang(en)
Stopcontacttypes:	NEMA 5–15P
Golf protectie functies:	Modem, Telephone
Output power capacity:	0.75 kVA
Ingang operation voltage (min):	- V
Ingang operation voltage (max):	120 V
Uitgang operation voltage (min):	115 V
Uitgang operation voltage (max):	120 V
Typische backup tijd op halve lading:	11 min
Typische backup tijd op volledige lading:	3 min
Hot-swap batterij:	Ja