Tripp Lite B114-004-R Handleiding

Tripp Lite Splitter B114-004-R

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite B114-004-R (12 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Video Splitter

(2 and 4 Port)

Models: B114-002-R, B114-004-R

Note: Follow these installation and operating procedures to ensure

correct performance and to prevent damage to this unit or to its connected devices.

Introduction 2

Package Contents 2

Product Features 2

Installation 2

Specifications 3

Warranty & Product Registration 3

Español 5

Français 9

Owner's Manual

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

All trademarks are the property of their respective owners.

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

Stand-Alone Installation:

1. Connect the PC's video output port to the Video Splitter's “Video In” port using an HDDB15

Male/Female Monitor Extension Cable (such as Tripp Lite’s P500-Series Cables).

2. Connect the Video Splitter's “Video Out” ports to the input of your monitors either by using the

existing cable on the monitor or by using an HDDB15 Male/Male Monitor Cable

(such as Tripp Lite’s P502-Series Cables).

3. Connect the provided power supply to the Video Splitter and turn on the unit. Your Video

Splitter is ready to go.

WARNING!

Use ONLY the 9V DC external power supply included with the unit.

The Video Splitter is a signal booster and splitter that takes video input from a single source

and directs it to multiple video outputs for monitors using analog signals. It extends the distance

a signal is sent up to 210 ft.

• B114-002-R or B114-004-R

• External Power Supply (Input: 100-240V, 50/60Hz, 0.4A Output: 9V 1A)

• Owner’s Manual

Introduction

Package Contents

Product Features

Installation

• One video input to multiple video outputs

• Transmission distance of up to 210 feet

• Suitable for VGA/SVGA/XGA/UXGA and Multisync monitors

• Cascade up to 3 levels of splitters to increase the number of outputs

• Supports 350 MHz bandwidth

IMPORTANT NOTE: This unit is not designed for CGA, EGA or MONOCHROME type

monitors or any monitor using a digital video signal.

Power Supply DC 9V 1A

Maximum Cable Length 210 feet

Signal Type VGA/SVGA/XGA/UXGA/Multisync

Warranty & Product Registration

Specifications

Installation

3-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of three

(3) years from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or

replacing (at its sole option) any such defective products. To obtain service under this warranty, you must

obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service

center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation

charges prepaid and must be accompanied by a brief description of the problem encountered and proof of

date and place of purchase. This warranty does not apply to equipment which has been damaged by

accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit

limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not

apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits

or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes,

claims by third parties, or otherwise.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Product Registration

Visit tripplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a

drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Multiple Unit Installation:

1. Connect the “Video Out” port from the first Video Splitter to the “Video In” port of the next

unit in the chain. Use a standard VGA HDDB15 Male/Female Cable (such as Tripp Lite’s

P500-Series Cables).

2. Connect the power supplies to the Video Splitters and turn the power switch on.

3. Repeat steps 1 and 2 to connect up to three levels of Video Splitters to the chain, with the

initial splitter being level one.

Product specificaties

Merk:	Tripp Lite
Categorie:	Splitter
Model:	B114-004-R
Kleur van het product:	Zwart
Breedte:	132.1 mm
Diepte:	94 mm
Hoogte:	43.2 mm
Gewicht verpakking:	730 g
Breedte verpakking:	144.8 mm
Diepte verpakking:	251.5 mm
Hoogte verpakking:	61 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
Maximum resolutie:	2048 x 1536 Pixels
Inclusief AC-adapter:	Ja
Land van herkomst:	China
Certificering:	RoHS
Aansluiting voor netstroomadapter:	Ja
Aansluiting(en):	HD15 (MALE), HD15 (FEMALE) (X4)
Maximale afstand:	64 m
Video uit:	4x VGA
Bandbreedte:	350 MHz
Aansluiting video:	VGA
(Buitenste) hoofdverpakking hoogte:	320 mm
(Buitenste) hoofdverpakking breedte:	266.7 mm
(Buitenste) hoofdverpakking brutogewicht:	7570 g
(Buitenste) hoofdverpakking lengte:	309.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Code geharmoniseerd systeem (HS):	8525.50.3040
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	20037332014270
Hoeveelheid Video ports:	5