Trek Speed Concept Handleiding

Trek Fiets Speed Concept

Lees hieronder de 📖 handleiding in het Nederlandse voor Trek Speed Concept (9 pagina's) in de categorie Fiets. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
2014 SPEED CONCEPT FIT GUIDE
2014 Speed Concept t guide
Fitting a tri bike
Fitting a triathlon bike is a multi-step process that must be performed in the correct sequence to achieve the
proper fit. Whether you’re new to fitting a bike or have experience fitting road bikes, this guide will help you
perform the fit steps in the correct order.
Please note that the new Speed Concept geometry is no different from the original Speed Concept, and the
sizing follows much the same process as before.
Note: This process applies to all MY14 Speed Concept bikes except the 7.0. To fit the 7.0, follow Step 1 and use the size
chart to determine the appropriate frame size. Then use standard fit and sizing practices to determine appropriate
stem length, rise, and spacers.
2014 Speed Concept t guide
Fit steps, in order
1. Measure elbow pad stack, then reach
2. Measure base bar stack, then reach
3. Use sizing chart to find frame size and stem
4. Determine saddle height, then position
Getting started
To complete Steps 1 and 2, you’ll need to get the customer on a bike. We recommend that you perform these
measurements with your customer on a size cycle. If you don’t have a size cycle, you may perform this step
using a stock triathlon bike off your floor (estimate the approximate frame size by eye), or use your customer’s
existing tri bike if available. This may not be the final frame size appropriate for your customer, but it will get
you started.


Product specificaties

Merk: Trek
Categorie: Fiets
Model: Speed Concept

Heb je hulp nodig?

Als je hulp nodig hebt met Trek Speed Concept stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fiets Trek

Handleiding Fiets

Nieuwste handleidingen voor Fiets