Transparent TT-W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Transparent TT-W (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
Transparent
Turntable
User Manual
Safety Instructions
TT—B/W
Designed and developed by Transparent™ | Stockholm, Sweden
https://transpa.rent transpa.rent
User Manual
Bruksanvisning
Manuel De L'utilisateur
Benutzerhandbuch
Manual De Usuario
ユーザーマニ
사용 설명서
小型透明扬声器 用户手册
Parts
1. User Manual
2. Gloves
3. Top Buffer
4. Power Cable
5. Music Cable (RCA)
6. Product Bag
7. Dust Cover
8. Finger Grip
9. Pillar Screw x4
10. Washers x16
11. Top Pillars x2
12. Hinge Pillars x2
13. Front Pillars x2
14. Bottom Pillars x4
15. Rubber Feet x4
16. Plinth
17. Screws
18. Motor Pulley
19. Spindle
20. E Box
21. Tonearm
22. Tonearm Base Plate
23. Precision Speed / Pitch Knob
24. Tonearm Counterweight
25. Counterweight Set Screw
26. Counterweight Dial
27. Speed RPM Setting Knob
28. Anti Skating Knob
29. LED
30. On/Off Switch
31. Tonearm Lifting Lever
32. Tonearm Clip
33. Headshell Mount
34. Headshell
35. Tonearm Grip
36. Cartridge
37. Cartridge Cover
38. Rubber Band
39. Assembly Tool (Allen Key/Hex key)
40. Cartridge Alignment Tool
41. Middle Buffer
42. Cloth
43. Platter
44. Sub Platter
45. Rubber Belt
46. USB Ground Adapter
47. 45 RPM Adapter
48. Extra Rubber Belt
49. Record Brush
50. Bottom Buffer
51. Packaging
Introduction
The Transparent Turntable is a high quality vinyl record player. It is built by a tempered glass plinth and dust cover, with most structural parts crafted out of aluminium. These sturdy materials offer a rigid structure to
ensure a reliable playback over time.
The belt driven motor system is a reliable method to ensure a consistent playback over a long period of time, and there are precision speed and tracking controls for fine tuning the playback.
We have developed our own tonearm with a custom headshell that can hold any moving magnet cartridge with standard mounting holes, but even the headshell is modular by the standard SME connector.
The tonearm is operated by custom aluminium tonearm grip, lifting lever and clip.
The Transparent Turntable has a built in pre-amp. This means it can play directly to any modern (active) loudspeaker without the need of separate equipment. If you wish to use external amplifiers there is of course a
pre-amp on/off switch as well. The TT comes with music cables of course, but to ensure a timeless functionality of the turntable, we have developed a compartment for wireless modules as well. The first generation TT
comes with our pre-installed Bluetooth™ module so you can enjoy your vinyl records in a wireless playback if you wish. In future home demands the compartment is ready to adapt and upgrade to future needs.
The completely modular design, high quality build and upgradable nature of this products is part of Transparent’s circular design philosophy. It is not only about where all raw materials come from, but also about a plan
to make the product stay relevant over a long time to come.
52. Bluetooth Module
53. Bluetooth Button
54. Bluetooth LED
55. Bluetooth Transmitter / Receiver Switch
56. Wireless Module Holder
57. Wireless Module Power Cable
58. Wireless Module Sound Cable
59. Ground Screw
60. Line Out RCA
61. FW Check / Upgrade Button
62. Pre-amp On/Off
63. USB-A 5V
64. Line Out 3,5mm
65. Wireless Module Compartment
66. AC Power Socket
57
4
5
10
15
41
42
43
44
45
14
13 22
23 27
28
30
29
31
32
24 26
47
48
49
50
51
46
9
11
12
12
3
6
7
16
36
52
59 60 61 62 63 64 65 66
56
373839
40
18 19
17
8
58
33
34
35
55
53 54
20
25
21
21
User Manual
Setup Guide
Unbox your turntable near the speaker you will use with it. Make sure you have enough flat
surface to place your turntable and an electrical socket nearby.
Open the box.
Put on the gloves (2). Take out the whole top buffer (3) and put it away for now.
Lift up your turntable from the packaging.
Open the product bag (6) and gently pull the opening over the front pillars, and then backw
reveal the full turntable.
Open the dust cover (7) by the finger grip (8).
The tonearm counterweight (24) comes pre-calibrated, so there is no need to set the weight. For
tracking force calibration instructions see page 4.
Remove the rubber band (38) holding the cartridge cover (37) in place during shipping. Also
remove the cartridge cover.
Place your favorite vinyl record on the platter.
Move the on/off switch (30) to the on position.
Double check that the speed RPM setting knob (27) is at the 33 RPM position (this is the most
common record speed). For playing singles at 45 RPM see page 4.
Double check that the anti-skating knob (28) is at position 2. For anti-skating settings see page 4.
Unlatch the tonearm clip (32).
Raise the tonearm by lifting the tonearm lever (31).
Take out the sub-platter (44) from the packaging.
Place the sub-platter on the spindle (19) with the three rubber dots facing upwards.
Pinch the paper flag holding the rubber belt (45) on the sub-platter side and pull it over the
motor pulley (18), then remove the paper flag.
Place the main platter (43) on top with the six rubber stripes facing upwards.
Connect the power cable (4) first to the AC power socket (66) on the backside of the turntable.
Connect the other side to a wall socket.
Connect the mini-jack of the music cable (5) to the “Line in” on your speaker or amplifier and
plug the RCA side of the cable to the RCA line out socket (60) on the backside of the turntable.
Make sure you plug the white plug to the white connector and the red plug to the red connector.
For instructions of the Y shaped ground wire on the sound cable (needed for Small Transparent
Speaker) see page 4.
For playback to two speakers see page 4.
For playback over Bluetooth see page 4.
Make sure your speaker is turned on and has the volume at least to 50%.
Make sure the pre-amp switch (62) in the back of the turntable is in the “on” position. For usage
with external amplifiers turn the pre-amp switch to the off position.
Now place the turntable in the place you want it to be. We recommend using gloves and having
the dust cover closed at all times when lifting and moving the turntable.
If the surface below your turntable is uneven, you have the possibility to adjust the leveling of the
rubber feet (15) by using a normal flat head screwdriver.
Move the tonearm by pinching the tonearm grip (35) and position the cartridge needle above the
edge at the beginning of the record. By now the record should have started spinning.
If there is dust or particles on your record, take this time to clean the record using the record
brush (49). While the record is spinning and the tonearm is in up position, lower the brush onto
the left side of the record so it cleans all the tracks of the record simultaneously, there is no nee
to move the brush back and forth, just let it catch the debris as the record spins and then move
out from the record.
Lower the tonearm by lowering the tonearm lever (31).
You should now hear music. If needed, fine tune the speed using the pitch knob (23). Adjust the
volume on your speaker and enjoy the moment.
44
18
19
43
6
7 8
4
35
49
5
31
31
30
28
27
24
32
3738


Product specificaties

Merk: Transparent
Categorie: Niet gecategoriseerd
Model: TT-W

Heb je hulp nodig?

Als je hulp nodig hebt met Transparent TT-W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Transparent

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd