TP Link Omada SM5110LSB-10 Handleiding

TP Link Niet gecategoriseerd Omada SM5110LSB-10

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link Omada SM5110LSB-10 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Remove the moduleInstall the module
©2024 TP-Link 7106511301 REV1.0.0
1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to
the transceiver.
2. Insert the module into the SFP+ slot and rmly press it into place.
3. Remove the protective dust plug from the module.
4. Plug a ber-optic cable into the module. Note that the module works
without any additional conguration.
1. Wear an ESD-preventive wrist or ankle strap to prevent ESD damage to
the transceiver.
2. Disconnect the network ber-optic cable from the module.
4. Reinstall the protective dust plug in the module’s optical bores and
place it on antistatic mat or a static shielding bag.
3. Pull the safety latch downwards to release the module, and then pull it
out from the slot.
Installation Guide
Note:
1. Do not touch the output pins on the transceiver with your hand.
2. Always keep the protective dust plug on the module’s optical bores until you are ready to make a connection.
Caution:
DO NOT point or stare directly into the beam or into the optical port of the transceiver when it is operating, as this can injure your eyesight.
10GBase-BX WDM Bi-Directional SFP+ LC Module
For technical support and other information, please visit
https://www.tp-link.com/support/?type=smb, or simply scan the
QR code.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com/business to join
TP-Link Community.
E
xplana on of the symbols on the product label
s
ymbols may vary from products
Symbol
Explanation
Cla ss II equipment
Cla ss II equipment with functional earthing
Alternating current
Direct current
Pol a rity of d.c. power con nector
For indoor use only
Dangerous voltage
Cauti on, risk of electric shock
Ene rgy e ciency Marking
Protecti ve earth
Ea rth
Fra me or chassis
Fu nctional earthing
Cauti on, h ot surface
Cauti on
Ope rator's manual
Stand-by
"ON"/"OFF" (push-push)
Fu se
Fuse is used in neutral N
Cauti on, avoid listening at high vol ume l evels for l ong periods
Di s con nection, all po wer p lugs
m
Switch of mini-gap construction
µ
Switch of micro- gap construction (for US version)
Switch of micro-gap / micro
-
disconnection construction
(for other versions except US)
ε
Switch without contact gap (Semiconductor switching device)
RECYCLING
This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means that
this product must be handled pursuant to European directive
2012/19/EU in order to be recycled or dismantled to minimize its
impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when p2-he buys a new electrical or
electronic equipment.
This is a class B product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.
CE Mark Warning
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних
документів та вимогам, що передбачені чинними законодавчими актами України.
CAN ICES-3 (B)/NMB-3(B)
Industry Canada Statement
FCC compliance information statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Product Name: 10GBase-BX WDM Bi-Directional SFP+ LC Module
Model Number: SM5110LSA-10, SM5110LSB-10
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply
with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment
and the equipment is properly maintained and operated.
Issue Date: 2024/07/19
The original UK Declaration of Conformity may be found at
https://www.tp-link.com/support/ukca


Product specificaties

Merk: TP Link
Categorie: Niet gecategoriseerd
Model: Omada SM5110LSB-10

Heb je hulp nodig?

Als je hulp nodig hebt met TP Link Omada SM5110LSB-10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd TP Link

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd