Total TMLI2001 Handleiding

Total Niet gecategoriseerd TMLI2001

Lees hieronder de đź“– handleiding in het Nederlandse voor Total TMLI2001 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/11
MULTITOOL
2
Security instructions
Caution
Read all safety warnings and all instructions. Failure to follow all warnings and
instructions may result in electrical shock, fire, and/or serious injury.
The term “power tool” in the warnings refers to your operated (corded) power tool mains-
or battery-operated (cordless) power tool.
Note: Save all warnings and instructions for future reference. Due to technical product updates,
this document is subject to change without notice.
1) Work area safety
a. Keep the work area clean and to prevent accidents. well lit-
b. Do not use power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust that can cause fires.
c. Keep children and other unauthorized persons away while using a power
tool. Distractions can cause you to lose control of the tool.
2) Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way.
Using a suitable plug reduces the risk of electric shock.
b. Avoid bodily contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electrical shock.
d. Never use the cord to carry, pull or unplug the power tool. Keep the cable
away from heat or oil.
e. When using a power tool outdoors, use an extension cord suitable for
outdoor use.
f. If using the tool in a damp location is unavoidable, use a Residual Current
Device (RCD) protected supply to reduce the risk of electric shock.
3) Personal security
a. Always stay alert, watch what you are doing and use common sense
when using the tool.
b. Do not use a power tool if you are tired or under the influence of
medication or other substances.
c. Wear personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non slip safety shoes, hard -
hat, or hearing protection used in the proper conditions will reduce
personal injury. Also don't wear loose clothing or jewelry.
d. Prevent the tool from turning on unintentionally. Make sure the switch is
in the off position before connecting to power source and moving.
e. Remove any adjusting wrenches or wrenches before turning on the power
tool. An adjustable wrench or wrench placed in a rotating part of the power
tool can cause serious injury.
f. If dust extraction and collection devices (such as a dust mask) are used,
make sure they are connected properly. Properly use these devices and
you will reduce dust related hazards.-
3
4) Use and care of battery tools
a. Recharge the battery only with the charger specified by the
manufacturer. An unsuitable charger can create a fire hazard.
b. Use power tools only with specifically designated batteries. Use of other
batteries may create a risk of injury or fire.
c. When the batteries are not in use, keep it away from other metal objects,
such as paper clips, coins, keys, nails, screws, or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals can cause burns or fire.
d. Abusive conditions can cause expulsion of liquid from the battery; avoid
contact. If accidentally contacted, rinse immediately with water. If the
liquid comes into contact with the eyes, also seek medical help. Liquid
expelled from the battery can cause irritation or burns.
e. Do not use a battery or tool that is damaged or modified. They may
exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
f. Do not expose a battery or tool to fire or excessive heat. Exposure to fire
or temperature above 130°C may cause an explosion.
g. Follow all charging instructions. Do not charge the battery or tool outside
the temperature range specified in the instructions. Improper charging
or charging at temperatures outside the specified range may damage
the battery or increase the risk of fire.
5) Service
a. replacement Have your power tool serviced by a qualified person and use
parts recommended by the manufacturer. This will ensure that the safety
of the power tool is maintained.
b. Never use damaged batteries. Battery packs should only be serviced by
the manufacturer or authorized service providers.

Product specificaties

Merk: Total
Categorie: Niet gecategoriseerd
Model: TMLI2001

Heb je hulp nodig?

Als je hulp nodig hebt met Total TMLI2001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Total

Total

Total TMLI2001 Handleiding

16 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

RCF

RCF FB-Q15-V Handleiding

16 December 2024
KeepOut

KeepOut FX700B Handleiding

16 December 2024
KeepOut

KeepOut FX800 Handleiding

16 December 2024
Ruggard

Ruggard EDC-600LC Handleiding

16 December 2024
Total Chef

Total Chef TCIF06G Handleiding

16 December 2024
Makita

Makita UT002G Handleiding

16 December 2024
KeepOut

KeepOut FX900V2 Handleiding

16 December 2024
Makita

Makita CV101D Handleiding

16 December 2024
Ruggard

Ruggard EDC-180LC Handleiding

16 December 2024
Radial Engineering

Radial Engineering X-Amp 500 Handleiding

16 December 2024