Total Chef TCES03 Handleiding
Total Chef
Blender
TCES03
Lees hieronder de 📖 handleiding in het Nederlandse voor Total Chef TCES03 (8 pagina's) in de categorie Blender. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
06/2017-v1
WARRANTY
This product is warranted to the retail consumer for 90 days from date of retail purchase,
against defects in material and workmanship.
WHAT IS COVERED:
- Replacement parts and labor.
- Transportation charges to customer for the repaired product.
WHAT IS NOT COVERED:
- Commercial or industrial use of this product.
- Damage caused by abuse, accident, misuse, or neglect.
- Transportation of the unit or component from the customer to a Master Service Centre.
IMPLIED WARRANTIES:
Any implied warranties, including the implied warranty of merchantability are also limited to
duration of 90 days from the date of retail purchase.
WARRANTY REGISTRATION:
Register on-line at www.koolatron.com AND keep the original, dated, sales receipt with this
manual.
WARRANTY AND SERVICE PROCEDURE:
If you have a problem with your unit, or you require replacement parts, please telephone the
following numbers for assistance:
North America 1-800-265-8456
Master Service Centres are at these locations:
U.S.A.
4330 Commerce Dr., Batavia, NY 14020-4102
Canada
139 Copernicus Blvd., Brantford, ON N3P 1N4
A Master Service Centre must perform all warranty work. Service after warranty may be
obtained at a Master Service Centre or at an authorized service dealer. Purchase Receipt
is required to establish warranty eligibility.
Instruction Manual
Electric
Spiralizer
TCES03
H1S244
www.koolatron.com
©2017 Koolatron, Inc. All rights reserved.
All specification are subject to change without notice.
IMPORTANT SAFEGUARDS
Before using this appliance, carefully read this Instruction manual and keep it
together with the Warranty Certificate, cashier receipt and if possible, the
original package inclusive of its interior packing. If you give this appliance to
other people, please also pass on the operating instructions.
• The appliance is designed exclusively for private use and for the envisaged
purpose. This appliance is not intended for commercial use.
• Do not use the appliance outdoors. Protect it from heat, direct sunlight,
humidity (do not immerse into liquids under any circumstances) and sharp
edges. Do not use the appliance with wet hands. If the appliance gets wet,
unplug it immediately.
• Always switch off and unplug the appliance (pull the plug, not the cable) when
you do not use the appliance, or when you attach accessories, during cleaning
or malfunctioning.
• Do not leave the appliance unattended during operation. Always switch off and
unplug the appliance when leaving the room.
• Regularly check the appliance and cable for signs of damage. Do not continue
to operate the appliance in case of damage.
• Do only use original parts.
• For the safety of your children, keep any packing parts (plastic bags,
Styrofoam etc.) out of their reach. Don't let small children play with bags!
Danger of suffocation I
WARNING
• Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
• Switch off the appliance and disconnect from mains power supply before
changing accessories or attachments, which are moving during operation.
• Please wait until the motor has completely stopped before you remove the
cutting attachments.
• Do not manipulate any of the safety mechanisms!
• Do not repair the appliance by yourself. Always contact an authorized
technician. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
• This appliance is not be used by children.
• Keep the appliance and its cord out of reach of children.
• Children are not to play with the appliance.
• Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and if
they understand the hazards involved.
• The motor block is not intended for insertion into water for cleaning. Please
observe the instructions that we have included for you in the chapter
"Cleaning".
IMPORTANT SAFEGUARDS (cont.)
WARNING: Risk of injury!
• The blades of the cutting attachments are very sharp! When fitting and remov-
ing the inserts and during cleaning you will come into contact with these
accessories. Use these accessories with the necessary caution to prevent
injuries. Only touch the inserts on the plastic.
• Always only use the pusher to press down the food and not your fingers, a fork
or other objects.
OVERVIEW OF THE COMPONENTS
1 Pusher
2 Feed tube
3 Cutting attachments
a Attachment for wave cutting (55 mm)
b Attachment for coarse cutting (55 mm)
c Attachment for medium sized cuttings (10mm)
4 Insert holder
5 On/Off Switch
6 Motor block
7 Cable storage
8 Container
32
4 5
ASSEMBLY/PREPARATIONS
1. Place the appliance on an even work surface.
2. Select a suitable attachment. Insert this attachment into the opening of the
insert holder. It has to lock into place audibly.
• Attachment for coarse cutting
• Attachment for medium sized cuttings
• Attachment for fine cutting
• Wave cut attachment
3. Install the insert holder in the motor by turning it into the "CLOSE' direction.
Please make sure that the insert holder is locked into the motor.
4. Install the feed neck on the motor housing and lock it in clockwise direction.
Pay attention to the guiding pins. The feed neck has to lock in place audibly.
NOTE - The appliance is equipped with a safety switch. If the feed neck does
not lock into place audibly, the appliance does not tum on.
5. Put the container into the appliance.
POWER CABLE
Pull the power cable out of the cable storage.
ELECTRIC CONNECTION
1. Before you plug the mains plug into the outlet, check whether the system
voltage that you want to use, matches the one of the appliance. You will find
information about it on the type plate.
2. Connect the appliance to a correctly installed grounded outlet.
SHORT-TERM OPERATION
Do not operate the appliance for longer than 2 minutes and then allow the appli-
ance to cool down for 2 minutes.
INTENDED USE
• This appliance can be used to cut solid food into "spirals." (e.g. Carrots, pota-
toes, zucchini, red beets, cucumbers, apples, radish, pears, etc.)
• It is only designed for this use and should only be used for this intended pur-
pose.
• It cannot be used to chop soft food such as bananas or aubergine.
• Only use this appliance as instructed in this user manual. Do not use this
appliance commercially.
• No other use is intended and can cause damage or personal injuries.
• The manufacturer is not responsible for any damages incurred due to improper
use.
UNPACK APPLIANCE
1. Take the appliance out of its packaging.
2. Remove all packaging materials, such as foils, filling materials, cable ties and
cartons.
3. Check that all accessories are included in the box.
4. If the contents of the box are incomplete or if damage is found, do not
operate the appliance. Return it to the dealer immediately.
NOTE -Clean manufacturing residues and dust from the appliance as described
under "Cleaning".
NOTES ON USE
Your new appliance is perfect if you want to prepare healthy and tasty meals.
Just exchange pasta with crisp vegetables. Advantages: More nutrients, more
fibers, and more energy! You food does not only taste good, but it also looks
appealing!
• Please peel carrots before using the appliance. The smoother the surface of
the food is, the better is the result in terms of continuous spirals.
• Put your food as upright as possible into the feed neck.
CAUTION! The vertical insertion has a considerable influence on the result.
• Individual vegetable noodle servings can be prepared better if the noodles are
not too long. Avoid continuous spirals by reducing the pressure applied to the
food pusher periodically.
• Food with a diameter of more than 60 mm cannot be processed. Please trim
the food at the sides to process it with this appliance.
Product specificaties
| Merk: | Total Chef |
| Categorie: | Blender |
| Model: | TCES03 |
Heb je hulp nodig?
Als je hulp nodig hebt met Total Chef TCES03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Blender Total Chef
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
16 December 2024
Handleiding Blender
- Blender Electrolux
- Blender Braun
- Blender Bosch
- Blender Philips
- Blender Panasonic
- Blender AEG
- Blender BEKO
- Blender Grundig
- Blender Inventum
- Blender Kenwood
- Blender Krups
- Blender Medion
- Blender Quigg
- Blender Siemens
- Blender Tefal
- Blender Unold
- Blender Adler
- Blender Afk
- Blender Akai
- Blender Alessi
- Blender Ambiano
- Blender Amica
- Blender Ariete
- Blender Bamix
- Blender Bartscher
- Blender Beem
- Blender Bellini
- Blender Beper
- Blender Bestron
- Blender Bifinett
- Blender Blaupunkt
- Blender Blendtec
- Blender Blokker
- Blender Bodum
- Blender Bomann
- Blender Boretti
- Blender Bourgini
- Blender Brabantia
- Blender Brandt
- Blender Breville
- Blender Buffalo
- Blender Bugatti
- Blender Domo
- Blender Domoclip
- Blender Dualit
- Blender Duronic
- Blender Efbe-schott
- Blender Emerio
- Blender Esge
- Blender Esperanza
- Blender Espressions
- Blender ETA
- Blender Eufy
- Blender Exquisit
- Blender Fagor
- Blender Farberware
- Blender Fritel
- Blender G3 Ferrari
- Blender Galanz
- Blender Gastroback
- Blender GE
- Blender George Foreman
- Blender Gorenje
- Blender Gourmetmaxx
- Blender Graef
- Blender H.Koenig
- Blender Haier
- Blender Hanseatic
- Blender Hendi
- Blender Hitachi
- Blender Homeland
- Blender Hotpoint
- Blender Hyundai
- Blender Innoliving
- Blender InstantPot
- Blender Kalorik
- Blender Kambrook
- Blender Kenmore
- Blender Kitchen Crew
- Blender KitchenAid
- Blender Klarstein
- Blender Koenic
- Blender Koenig
- Blender Kogan
- Blender Konig
- Blender Korona
- Blender Lagrange
- Blender Laica
- Blender Livington
- Blender Livoo
- Blender Logik
- Blender Maestro
- Blender Magic Bullet
- Blender Magimix
- Blender Maxwell
- Blender Melissa
- Blender Mesko
- Blender Mia
- Blender Micromaxx
- Blender Midea
- Blender Moa
- Blender Montana
- Blender Morphy Richards
- Blender Moulinex
- Blender MPM
- Blender Nedis
- Blender Ninja
- Blender Nordmende
- Blender Nova
- Blender Novamatic
- Blender Novis
- Blender NutriBullet
- Blender Philco
- Blender Primo
- Blender Princess
- Blender Privileg
- Blender ProfiCook
- Blender Proline
- Blender Redmond
- Blender Renkforce
- Blender Ritter
- Blender Rommelsbacher
- Blender Rotel
- Blender Russell Hobbs
- Blender Sage
- Blender Salton
- Blender Santos
- Blender Sanyo
- Blender Saro
- Blender Saturn
- Blender Schneider
- Blender Sencor
- Blender Severin
- Blender Shark
- Blender Sharp
- Blender Silvercrest
- Blender Smeg
- Blender Sogo
- Blender Solac
- Blender Solis
- Blender Springlane
- Blender Steba
- Blender Studio
- Blender Sunbeam
- Blender SupportPlus
- Blender Swan
- Blender Taurus
- Blender Team
- Blender Telefunken
- Blender Tesco
- Blender Tevion
- Blender Thane
- Blender Thomas
- Blender Tomado
- Blender Tower
- Blender Trebs
- Blender Tristar
- Blender Turbotronic
- Blender Turmix
- Blender Ufesa
- Blender Vitamix
- Blender Vitek
- Blender Vivax
- Blender Waves
- Blender Weasy
- Blender Westinghouse
- Blender Wmf
- Blender Wolf
- Blender Xsquo
- Blender Zelmer
- Blender Jata
- Blender JML
- Blender Jocel
- Blender JTC
- Blender Juiceman
- Blender OK
- Blender Omega
- Blender OneConcept
- Blender Orion
- Blender Oster
- Blender Clas Ohlson
- Blender Arzum
- Blender Black And Decker
- Blender Camry
- Blender Caso
- Blender Clatronic
- Blender Concept
- Blender Continental Edison
- Blender Cuisinart
- Blender ECG
- Blender Elba
- Blender Gallet
- Blender Hamilton Beach
- Blender Heinner
- Blender Imetec
- Blender Izzy
- Blender Khind
- Blender Mellerware
- Blender OBH Nordica
- Blender Optimum
- Blender Orbegozo
- Blender Profilo
- Blender Scarlett
- Blender Sinbo
- Blender Trisa
- Blender Vox
- Blender Wilfa
- Blender Champion
- Blender Monoprice
- Blender Catler
- Blender Drew & Cole
- Blender Nutrichef
- Blender AYA
- Blender Bella
- Blender Costway
- Blender Danby
- Blender King
- Blender Nevir
- Blender Svan
- Blender Ardes
- Blender Eldom
- Blender Grunkel
- Blender Lümme
- Blender Premium
- Blender Coline
- Blender Haeger
- Blender Waring Commercial
- Blender Brentwood
- Blender Chefman
- Blender DCG
- Blender Pyrex
- Blender Witt
- Blender Royal Catering
- Blender Apuro
- Blender Day
- Blender Zephir
- Blender Lenoxx
- Blender Riviera And Bar
- Blender Cosori
- Blender Baby Brezza
- Blender G21
- Blender Aurora
- Blender BORK
- Blender Orava
- Blender Signature
- Blender Dash
- Blender Cecotec
- Blender Prixton
- Blender Flama
- Blender Nesco
- Blender RGV
- Blender Comelec
- Blender Dynamic
- Blender Bar Maid
- Blender Ursus Trotter
- Blender Noveen
- Blender CRUX
- Blender AENO
- Blender Nutri Ninja
- Blender Łucznik
- Blender Emeril Lagasse
- Blender PowerXL
- Blender Globe
- Blender Beautiful
- Blender Tribest
- Blender Usha
- Blender Vitinni
- Blender Zwilling
- Blender Sam Cook
- Blender Zeegma
- Blender WestBend
- Blender Just Perfecto
- Blender Focus Electrics
- Blender Petra Electric
- Blender AvaMix
- Blender Robot Coupe
- Blender Inno-Hit
- Blender Jarden
- Blender JIMMY
- Blender Semak
- Blender Create
- Blender Girmi
- Blender BioChef
- Blender Power Air Fryer XL
- Blender Luvele
- Blender Back To Basics
- Blender Proappliances
- Blender Electroline
- Blender Imarflex
- Blender Mystery
Nieuwste handleidingen voor Blender
14 December 2024
14 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024