Toolland DT20005 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Toolland DT20005 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
DT20005
USER MANUAL 2
HANDLEIDING 7
MODE D'EMPLOI 12
MANUAL DEL USUARIO 17
BEDIENUNGSANLEITUNG 22
INSTRUKCJA OBSŁUGI 22
MANUAL DO UTILIZADOR 32
DT20005
V. 02 – 29/09/2021 2 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Toolland! Please read the manual thoroughly before bringing this
device into service. If the device was damaged in transit, do not install or use it and contact
your dealer.
2. Safety Instructions
For your own safety, read this manual carefully before using this
sprayer.
This device can be used by children aged from 8 years and
above, and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning the use of the
device in a safe way and understand the hazards involved.
Children shall not play with the device. Cleaning and user
maintenance shall not be made by children without supervision.
3. General Guidelines
Refer to the V
®
Service and Quality Warranty on the last pages of this manu
All modifications of the device are forbidden for safety reasons. Damage caused by use
modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will
void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the
warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,
incidental or indirect) – of any nature (financial, physical…) arising from the possession,
use or failure of this product.
Keep this manual for future refere
ce.
4. Assembly
Fit the lance assembly to the sprayer by means of the flexible ho
Remove the nut fitted to the lanc
Insert hose through nut
Push the hose fitting fully onto the lance connect
Screw nut tightly onto lanc
Attach the other end of the hose to the container using the above method.
DT20005
V. 02 – 29/09/2021 3 ©Velleman nv
Ensure that the hose is fully pushed on and that the nut is screwed down tig
Fit the carrying strap by threading the expandable ring through the hole in the lug moul
into the container base.
Fit the other end of the strap through the slot in the top lug and thread through the metal
buckle and adjust length to suit.
5. Operating Instructions
Ensure that the hose is securely attached to the sprayer and the lance and the locking nut
are tight.
Check that the liquid which you intend to use is suitable (see the spraying chem
section).
Fill the container to the desired level taking care not to exceed the maximum fill mark.
Screw the pump firmly home to ensure an airtight seal.
Operate the pressure release valve manually by pulling the blue knob upwards to ensure it
is functioning correctly.
Release the pump handle by pressing down and turning ant
-
clockwise.
Pump to pressurize the container
When the correct operating pressure has been reached, the pressure release valve will ve
to discharge excess air.
The container is adequately
pressurized and does not require further pumping.
Trigger Operation
The trigger mechanism has been designed to allow for two modes of operation, eithe
intermittent or continuous.
Intermittent Operation
Depress trigger to operate and release it to stop spraying.
Continuous Operation
While depressing trigger push forward with the thumb to hold in the lock on position.
The sprayer will now continue to operate without any further finger pressure, so preventing
fatigue.
To turn off the sprayer pull back the level and relea
Aim the spray nozzle towards a test area, squeeze the trigger on the lance and adjust
nozzle to the desired degree of fineness by twisting the nozzle from mist through coarse
spray to jet.
Do not undo the nozzle too far or leakage will occur from the back of the nozz
If the nozzle continues to spray or drip after the trigger has been released, it is because
there is air in the discharge system (lance, handle trigger or hose).
Purge the system by turning the nozzle to jet and operating the trigger on the lance on
off in short bursts until the liquid shuts off cleanly.
Collect any chemicals in a separate container and use later.
To keep spraying a few pumps at infrequent interval are all that is required.
After use and before storage release the pressure from the container by pulling the blue
knob of the pressure release valve upwards.
If the sprayer has been used with chemicals, discard safely any unused solutio
after use.
Add a little detergent and some warm water (not hot) to the spra
Re
-
assemble the sprayer and spray some of the contents through
Repeat with the clean, cold wate
Check that the nozzle assembly is free from sediment
If necessary, repeat the process until the sprayer is clea


Product specificaties

Merk: Toolland
Categorie: Niet gecategoriseerd
Model: DT20005

Heb je hulp nodig?

Als je hulp nodig hebt met Toolland DT20005 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Toolland

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd