Toa SR-SA4 Handleiding

Toa Niet gecategoriseerd SR-SA4

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa SR-SA4 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

4. SPECIFICATIONS

Steel plate, white, paint

165 (w) x 175 (h) x 220 (d) mm

1.7 kg (including accessories)

ST-32

Hexagon head bolt M5 x 20 with washer ...... 8

Number of Speakers

to be Mounted

Finish

Dimensions

Weight

Applicable Stand

(option)

Accessories

Note: The design and specifications are subject to change without

notice for improvement.

For step 3 and 4 below, refer to the instruction manual attached

to the ST-32.

Step 1. Remove the screws on both sides of the speaker.

Note: The removed screws are not used.

Step 2. Install the SR-SA4 Stand Adapter to the speaker.

Step 3. Attach the bracket (included in the ST-32) to the

SR-SA4 Stand Adapter.

Step 4. Mount the bracket onto the stand.

3. SPEAKER MOUNTING

Speaker

Hexagon head bolt M5 x 20

with washer (included in the SR-SA4)

SR-SA4 Stand adapter

Screw

(4 each on

both sides)

Bracket (included in the optional ST-32)

ST-32 Speaker Stand (optional)

Fixing bolt

When installing

the SR-S4L speaker

When installing

the SR-S4S speaker

Speaker mounting screw

(included in the ST-32)

Plain washer (included in the ST-32)

Note

When using the ST-32, set the

inner pipe to its lowest position.

INSTALLATION MANUAL

STAND ADAPTER SR-SA4

The SR-SA4 is designed to be used exclusively to mount the

SR-S4L or SR-S4S Line Array speaker on the ST-32 Speaker

Stand.

1. SAFETY PRECAUTIONS

•Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

•Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or cautions

regarding safety.

•After reading, keep this manual handy for future reference.

•Do not use other methods than specified to mount the unit.

Extreme force is applied to the unit and the speaker could

fall off, possibly resulting in personal injuries.

•Tighten each nut and bolt securely. Ensure that the unit has

no loose joints after installation to prevent accidents that

could result in personal injury.

•Use the ST-32 Speaker Stand in combination. Doing

otherwise may cause the unit or component to fall off,

resulting in personal injury.

Indicates a potentially hazardous situation which, if

mishandled, could result in death or serious personal injury.

WARNING

•Avoid touching the unit's sharp metal edge to prevent injury.

Indicates a potentially hazardous situation which, if mishandled,

could result in moderate or minor personal injury, and/or property

damage.

CAUTION

Printed in Japan

133 - 0 1 -443 - 3 0

SR-S4L SR-S4S

2. SPEAKER MOUNTING VIEW

Product specificaties

Merk:	Toa
Categorie:	Niet gecategoriseerd
Model:	SR-SA4
Kleur van het product:	Wit
Gewicht:	1700 g
Breedte:	165 mm
Diepte:	220 mm
Hoogte (max):	175 mm
Materiaal:	Staal
Compatibiliteit:	SR-S4L, SR-S4S