Toa HY-ST1 Handleiding

Toa Niet gecategoriseerd HY-ST1

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa HY-ST1 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

2. SPECIFICATIONS

Steel plate, black, semi-gloss

96 (w) x 351 (h) x 148 (d) mm

3 25/32 (w) x 13 13/16 (h) x 5 53/64 (d) inches

(excluding projection)

1.2 kg

ST-32 (option) or the generic speaker stand

with a ø35 mm (1 3/8 inches) pipe

Hexagon head bolt M8 x 15 with washer ...... 4

Finish

Dimensions

Weight

Applicable Stand

Accessories

Note: The design and specifications are subject to change without

notice for improvement.

3. INSTALLATION

Step 1. Attach the HY-ST1 to the HX-5 series rear plate.

Note

If the HX-5 series is installed vertically, change the

orientation of the rear plate.

More particularly, refer to the instruction manual

supplied with the HX-5 series.

Step 2. Loosen the adapter fixing screw to place the adapter

on the speaker stand.

The diameter of the pipe of the mountable speaker

stand is 35 mm.

Step 3. Retighten the fixing screw.

Rear plate

Hexagon head bolt

M8 x 15 with washer

(accessory)

HY-ST1

Adapter fixing screw

HX-5 series

2, 3

Note

Mount the speaker so that

its handle is positioned at

the right side.

INSTALLATION MANUAL

SPEAKER STAND ADAPTER HY-ST1

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the

instructions in this section for correct and safe operation.

• Be sure to follow all the precautionary instructions in this

section, which contain important warnings and/or cautions

regarding safety.

• After reading, keep this manual handy for future reference.

• Do not use other methods than specified to mount the unit.

Extreme force is applied to the unit and the speaker could

fall off, possibly resulting in personal injuries.

• Tighten each nut and bolt securely. Ensure that the unit has

no loose joints after installation to prevent accidents that

could result in personal injury.

• Avoid installing or mounting the speaker stand in unstable

locations, such as on a rickety table or a slanted surface.

Doing so may result in the unit falling down and causing

personal injury and/or property damage.

Indicates a potentially hazardous situation which, if

mishandled, could result in death or serious personal injury.

WARNING

• Avoid touching the unit's sharp metal edge to prevent injury.

• Avoid placing the unit in a doorway or other high traffic area

as people may trip on the equipment and cords, or be injured

by falling objects.

• Use the ST-32 Speaker Stand or the stand that allows a load

over 25 kg in combination. When using the speaker stand,

set the inner pipe to its lowest position. Doing otherwise may

cause the unit or component to fall off, resulting in personal

injury.

Indicates a potentially hazardous situation which, if mishandled,

could result in moderate or minor personal injury, and/or property

damage.

CAUTION

Printed in Indonesia

5 3 3 - 0 6 - 1 2 0 - 0 0

[Finished assembly diagram]

ST-32 speaker

stand (optional)

Vertical installation Handle

Handle

Horizontal installation

Note

Mount the speaker so that

its handle is positioned

downward.

TOA's HY-ST1 Speaker Stand Adapter is used exclusively to mount the HX-5 series speaker system on the speaker stand. The

HY-ST1 fits the ST-32 Speaker Stand or other stands with mounting pipe of 35 mm in diameter.

To assure the safety against a fall of

speaker stand, set the inner pipe to its

lowest position or take other appropriate

measures.

CAUTION

Product specificaties

Merk:	Toa
Categorie:	Niet gecategoriseerd
Model:	HY-ST1
Kleur van het product:	Zwart
Gewicht:	1200 g
Breedte:	96 mm
Diepte:	148 mm
Hoogte (max):	351 mm
Materiaal:	Staal
Compatibiliteit:	HX-5, ST-32
Inclusief schroeven:	Ja