Technoline WS 9310 Handleiding

Technoline Weerstation WS 9310

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 9310 (9 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9



Holder

Detachable stand

WEATHER STATION

INTRODUCTION:

Congratulations on purchasing this innovative 433MHz Weather Station which displays the weather forecast, time,

indoor temperature, and up to three outdoor temperature readings. To enjoy the full benefits of this innovative product,

please read this operating manual.

Weather Station:

FEATURES:

• DCF radio-controlled time reception

• LCD clock in 24 hour time display

• Indoor and outdoor temperature reading in degree Celsius (°C)

• Indoor and outdoor temperature with Minimum and Maximum records

• Weather tendency indicator and weather icons

• Can receive up to three Outdoor transmitters

• Table standing or wall mountable (detachable table stand)

Hanging hole Temperature Transmitter:

SETTING UP:

Please follow these steps to ensure that your new Weather Station works correctly with the temperature

transmitter(s):

Function Keys

Battery

compartment

1. First, insert 2 x AA, IEC LR6, 1.5V batteries into the Weather Station. Once the batteries are in place, all

segments of the LCD will light up briefly. Then the indoor temperature, the time as -:--, and the weather icons

sun and clouds will be displayed. If the indoor temperature is not displayed after a few seconds, remove the

batteries and wait for at least 30 seconds before reinserting them. Once the indoor temperature is displayed

proceed to step 2.

Battery

compartment

2. Within 1-1/2 minutes of activating the Weather station, place 2 x AAA, IEC LR3, 1.5V batteries into the

transmitter.

3. After a few seconds of inserting the batteries into the transmitter, the Weather Station will start receiving data

from the transmitter. The remote temperature will then be displayed on the Weather Station. If this does not

happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.

4. The Weather Station can take up to 3 remote transmitters. If you have purchased additional transmitters, follow

step 2 for all extra transmitters. However, ensure that you leave 10 seconds in between the reception of the

last transmitter and the set-up of the following transmitter. The Weather Station will number the transmitters in

the order of set-up, i.e. the first transmitter will have the temperature displayed with the channel number 1

against it and so on.

Note: No channel number will show up if there is only one transmitter used.

5. When all the transmitters are set up, there is a testing period, during which the display switches quickly

between all the received transmitters at random, according to which random transmission it receives. Pressing

any key will stop this process and the display will show the temperature for the first transmitter. The process

also stops automatically if no keys are pressed for a few minutes.

6. The DCF-77 time code reception is automatically started just after the Weather Station is activated. This takes

typically between 3 - 5 minutes in good conditions. This time period is an excellent opportunity to locate the

transmitter(s) in suitable location(s) outdoors. In order to ensure sufficient 433 MHz transmission however, this

should under good conditions be no more than 25 meters from where the Weather Station will be finally

positioned (see notes on “Positioning” and “433 MHz Reception”).

7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter a time initially. The

clock will automatically attempt each hour to receive the DCF time. When this is successful, the received time

will override the manually set time.

Note:

Should the total time of inserting the batteries into the transmitters take longer than 1-1/2 minutes from the time of

inserting the batteries into the Weather Station then temperature reception problems may occur. If the temperature is

Battery cover

Battery compartment

not being received, then see Checking for 433MHz reception, before resetting the units (see Resetting the

Weather Station below).



In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures.

This is because the transmitter at start-up assigns a random security code and this code must be received and stored

by the Weather Station in the first 1-1/2 minutes of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to an authorized

depot.

LCD SCREEN

The Weather Station’s LCD is split into 3 sections displaying the information for time, weather forecast, indoors and

outdoors.

After unit reset, all the segments will light up momentarily before displaying:

1. Weather Icon

2. Time “-:--“

3. Indoor temperature in degree Celsius (°C)

4. Hidden Max/Min icon for Indoor/Outdoor Temperature

5. Outdoor Temperature in °C and transmitter identification number

Weather Tendency

Indicator

TIME SETTING:

When the setting up procedures are completed but DCF time has not been received, the time can be set manually.

Outdoor temperature

in ºC Transmitter

identification

number

Time

Indoor temperature

in ºC

Weather Icon

DCF Tower icon

(for time reception)

Outdoor temperature

reception indicator

Product specificaties

Merk:	Technoline
Categorie:	Weerstation
Model:	WS 9310
Kleur van het product:	Zilver
Ingebouwd display:	Ja
Breedte:	73.5 mm
Diepte:	27 mm
Hoogte:	158 mm
Meeteenheid temperatuur:	F,°C
Accu/Batterij voltage:	1.5 V
Klok functie:	Ja
Ophangsysteem voor aan de muur:	Ja
Meetfuncties:	Indoor thermometer,Outdoor thermometer
Meetfuncties trend display:	Thermometer
weerstation extremum data:	Thermometer
Weersvoorspelling:	Ja
Receiver afmetingen (B x D x H):	59 x 21 x 65 mm
Type batterij:	AA IEC LR6, AAA IEC LR3
Aantal batterijen (receiver):	2
Min/Max temperatuur geheugen:	Ja
Temperature measurement range (outside) (T-T):	-29.9 - 69.9 °C
Aantal batterijen (sensor):	2
Temperature measurement range (inside) (T-T):	0 - 60 °C
DCF radio klok:	Ja
Aantal sensoren ondersteund (max):	3