Technoline WS 8117 Handleiding

Technoline Weerstation WS 8117

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 8117 (12 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

MOONPHASE WALL CLOCK

Instruction Manual

FEATURES:

Battery cover

LCD1

display

Hanging holes

MOONPHASE WALL CLOCK:

• DCF-77 Radio controlled time with manual setting option

• 12/24 hour time display

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (4 languages to choose from: German, English, French, and Spanish)

• Display 12 Moon phases throughout the year

• Time zone setting

• ºC or ºF temperature display selectable

LCD2

display

Function keys

Foldable stand

• Indoor temperature display

• Outdoor temperature display via 433MHz transmission

• Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

• Remote transmission of outdoor temperature

to Temperature Station by 433MHz signals

• Wall mounting case

Holder

TO INSTALL AND REPLACE BATTERIES IN THE MOONPHASE WALL CLOCK

The Moonphase wall clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the

batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery

compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking inside battery compartment).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER

The transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. To install and replace the batteries,

please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking inside battery

compartment).

3. Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units. Avoid using rechargable

batteries.

SETTING UP:

1. Insert the 2 x AAA, IEC LR3, 1.5V batteries into the transmitter (See “To install and

replace batteries in the Temperature Transmitter” above).

2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Moonphase wall clock

as indicated above (see "To install and replace batteries in the Moonphase wall

clock“ above).

3. Once the batteries are in place, all segments of the LCD will light up briefly and “03” will

appear on LCD 1. Then the indoor and outdoor temperature - -.-°C, the time as -:--, the

date as 1/1, and weekday will be displayed.

4. Do not press any buttons for 10 minutes

5. The Moonphase wall clock will start receiving data from the transmitter. The remote

temperature will then be displayed on the Moonphase wall clock. If the outdoor

temperature is not displayed 90 seconds after inserting the batteries into the receiver, all

batteries are needed to be removed and wait for at least 1 minute for reset from step 1.

6. The DCF time code reception will automatically start. This takes typically between 3 - 5

minutes in good conditions. This time period is an excellent opportunity to locate the

transmitter in suitable location outdoors. In order to ensure sufficient 433MHz

transmission however, this should under good conditions be no more than 100 meters

from where the Moonphase wall clock will be finally positioned (see notes on

“Positioning” and “433MHz Reception”).

7. If after 10 minutes the DCF time has not been received, use the SET key to manually

enter the set mode and change either the time or date in order to activate the DCF

reception. The clock will then automatically attempt to receive the DCF time every full

hour each day. When this is successful, the received time will override the manually set

time. The date is also updated with the received time (Please refers to notes on “DCF

Radio controlled time” and “Manual time setting”).

8. The indoor temperature will be measured after the DCF reception.

Note:

In the event of changing batteries tteries do not spring free from of the unit ensure that the ba

the contacts. Always wait at least 1 minute after removing the batteries before reinserting,

otherwise start up and transmission problems may occur.

FUNCTION KEYS

The Moonphase wall clock has four easy to use keys:

SET key : To enter into the set mode for the following functions: time zone, language,

hour, minute, year, month, day, weekday, 12/24 hour, ºC or ºF temperature

display

+ key : To toggle between the second, indoor/outdoor temperature or weekday

display

To change the values in manual set mode

ALM key : To enter into the alarm set mode

To set the alarm ON/OFF

SNZ key : To activate the snooze function during alarm

To display the alarm time in normal mode display

To exit any setting modes

MOONPHASE WALL CLOCK LCD SCREEN DESCRIPTIONS

The Moonphase wall clock's LCD is divided into 2 sections and once the batteries are inserted,

all the segments will light up briefly before displaying the information for time, date, indoor and

outdoor temperatures.

Product specificaties

Merk:	Technoline
Categorie:	Weerstation
Model:	WS 8117
Kleur van het product:	Zwart, zilver
Alarm functie:	Ja
Ophangsysteem voor aan de muur:	Ja
Type batterij:	AA / AAA
Aantal batterijen (receiver):	2
Temperature measurement range (outside) (T-T):	-29.9 - 59.9 °C
Aantal batterijen (sensor):	2
Temperature measurement range (inside) (T-T):	0 - 50 °C
DCF radio klok:	Ja