Techno Line WT 759 Handleiding

Techno Line Alarm ringer WT 759

Lees hieronder de 📖 handleiding in het Nederlandse voor Techno Line WT 759 (1 pagina's) in de categorie Alarm ringer. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

Manual WT 759

Setting in

Pull down the lid of the battery compartment (at the bottom of the case).

Insert a new battery (AA type, LR6, 1,5 V), observing correct polarity as indicated in the

battery compartment. Put lid back again.

Setting the clock automatically

The clock starts automatically receiving the DCF signal and displays after 2 - 5 minutes the

correct time. If the clock still has not set itself after 10 minutes, reception is faulty or not

possible at the chosen location. Interferences could be electronically devices like TV or PC.

The disturbance range can be a circuit of up to 2 meter. Press RESET button on the backside

and repeat setting at a different location.

Switch On alarm

Push the alarm ON/OFF button upwards. The alarm sounds at the set alarm time.

Interrupt alarm (snooze)

Press SNOOZE button on top of the alarm clock. The alarm is interrupted and the backlight is

activated. The alarm sounds again after 5 minutes.

Switch off alarm

To switch off the alarm, push the alarm ON/OFF – button down.

Backlight

To activate backlight, press SNOOZE button on top of the clock.

Product specificaties

Merk:	Techno Line
Categorie:	Alarm ringer
Model:	WT 759
Kleur van het product:	Zilver
Materiaal behuizing:	Kunststof
Snooze functie:	Ja
Ondersteund aantal accu's/batterijen:	1
Afmetingen (B x D x H):	80 x 56 x 115 mm
Type beeldscherm:	Analoog
Type batterij:	LR06 Mignon AA