Sonic Alert SBD375sseu Handleiding

Sonic Alert Alarm ringer SBD375sseu

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonic Alert SBD375sseu (3 pagina's) in de categorie Alarm ringer. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

SONIC ALERT’S 1 YEAR LIMITED WARRANTY

The Sonic Boom Dual Alarm Clock Model SBD375ss is

warranted against manufacturing defects in materials and

workmanship for one (1) year from the date of purchase.

Within this period Sonic Alert will repair or replace at our option

the SBD375ss without charge for parts and labor. Simply

send the SBD375ss (postpaid) and a copy of your sales slip as

proof of purchase to:

Sonic Alert Inc., 1050 E. Maple Road, Troy MI 48083

Made in China

Sonic Alert 1050 East Maple Rd. Troy, MI 48083

www.SonicAlert.com 1- - -800 566 3210 V/TTY

Sonic Boom Dual Alarm Clock

with Bed Shaker

Model SBD375sseu

Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before

connecting to mains make sure that the requirements specified on the apparatus corresponds to the

available power supply i.e. USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.

Made in China

Sonic Alert 1050 East Maple Rd. Troy, MI 48083

www.SonicAlert.com 1- - -800 566 3210 V/TTY

The Lightning flash and

arrowhead within the

triangle is a warning sign

alerting you of dangerous

voltage inside the

product.

CAUTION: TO

REDUCE THE RISK OF

ELECTRICAL

SCHOCK, DO NOT

REMOVE THE COVER

(OR BACK) FROM THE

PRODUCT. NO USER

SERVICABLE PARTS

INSIDE. REFER

SERVICING TO YOUR

SONIC ALERT

DEALER.

The exclamation mark

within the triangle is a

warning sign alerting you

of important instructions

accompanying the

product.

DUAL ALARM CLOCK WITH ADJUSTABLE TONE, VOLUME, AND

VIBRATOR

MODEL SBD375ss

OPERATION INSTRUCTIONS

IMPORTANT- Please read these instructions carefully before use and retain for future

reference.

Warning: To prevent fire or shock hazard do not expose this appliance to rain or moisture. Before

connecting to mains make sure that the requirements specified on the apparatus corresponds to the

available power supply i.e. USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.

Features shown on diagrams above:

1) Dual Alarm Setting 7) Slow Min/Hour Button 13) Alarm 1 (AL1) Indicator

Switch 8) Snooze Button 14) Alarm 2 (AL2) Indicator

2) Dimmer Switch 9) Time Set Switch 15) Vibrator/Bed Shaker Input

3) Clock Display 10) Tone Control Wheel 16) AC Power Input

4) PM Indicator (12 hr. only) 11) Function Switch 17) Backup Battery Compartment

5) Alarm SET/OFF Switch 12) Volume Control Wheel

6) Fast Min/Hour Button

GENERAL DATA

Power: Consumption: USA: AC 110V / 60Hz EUROPE: AC 230V / 50 Hz.

UL listed transformer (Underwriters Laboratories)

Setting the corre ct time-

1) Depress “TIME SET” button (9)

As you depress the “TIME” button (9) at the same time depressing the “FAST” (6) or the “SLOW

(7) minute/hour button to advance clock display until you have desired time.

3) Lighted dot (4) located in upper left corner o

f clock display indicates time is PM, no light indicates

time is AM.

Setting the alarm time-

1) To set alarm AL1 slide “DUAL ALARM SETTING SWITCH” (1) to AL1 position.

Depress “ALARM SET/OFF” (5) button at the same time depressing “FAST” (6) or the “SLOW”

(7) minute/hour button until you reach desired alarm setting.

NOTE: when setting the alarm time if you advance more than 24 hours the display (3) will begin to

flash and alarm will sound. To stop flashing, move “FUNCTION SWITCH” (11) up then back to

OFF position. When alarm sounds display (3) will also flash.

3) Make sure alarm time is correctly set for AM or PM (4).

Once alarm AL1 has been set, slide the “DUAL SETTING SWITCH” (1) to the AL2 position

Follow the same steps that were taken when setting alarm AL1.

Once both AL1 and AL2 have been set, slide the “DUAL SETTING SWITCH” to the middle

position AL1+AL2 for both alarms.

You will see two dots on the right side of the LED display; AL1 (13) and AL2 (14) to show alarm

have been enabled. Lighted dots indicate which alarm is set.

Alarm -

To enable the alarm function, slide the “FUNCTION SWITCH” (11) up to the position that you

desire to wake to, you can choose “VIB” for bed shaker, “BUZZ” for sound, and “VIB/BUZZ” fo

both. NOTE: whichever function you choose to wake to, will be the same function for both alarms.

Snooze Operation-

1) “SNOOZE” button (8) – press after alarm has gone off. The alarm will re-

set for an additional 9

minutes for extra sleep. You may repeat up to 54 minutes.

2) When using “SNOOZE” (8) if alarm AL1 uses snooze, it will not affect alarm AL2.

Shutting Off Alarm -

Alarm can be shut off temporary for the day or permanently shut off.

When alarm AL1 goes off, press the “ALARM SET/OFF” (5) button to turn off for the day

2) Once both alarms go off and

the “ALARM SET/OFF” (5) button has been pressed, alarms will shu

off for the day and come back on the next day at the same time if alarm settings have not changed.

To shut the alarm off permanently, slide the “FUNCTION SWITCH” (11) down to the OFF

positi

on. Alarm will not come on until “FUNCTION SWITCH” (11) is set to “VIB/BUZZ”, “VIB”

or “BUZZ” position.

Volume Control-

1) To adjust volume, rotate wheel located on the lower right bottom corner of the clock (12).

Tone Control-

1) To adjust “TONE CONTROL” (10)

turn the wheel on the top right corner of the clock to the

desired tone sound.

Bed Shaker / Vibrator-

1) Attach the bed shaker jack to the back of clock at “VIBRATOR INPUT” (15).

2) To turn on vibrator slide “FUNCTION SWITCH” (11) to “VIB” or “VIB/BUZZ” positio n.

3) Place vibrator between mattress and box spring.

Battery Backup-

1) To use battery back up, install a 9-

volt alkaline battery in back of clock located under the

“BACKUP BATTERY COMPARTMENT COVER” (17). Battery not included. NOTE: the LED

display will not sh

ow during power failure, but the clock will still be running and keeping proper

time until the power comes back.AC_9V Power Input-

1) Attach the “AC POWER INPUT” (16) to the back of AC-

9V IN next to “VIBRATOR INPUT”

(15); it is the smaller input of the two.

Clock Format Switch -

Located on the back of the clock this switch is a 3 position switch to set the correct time format for you

country. The format is necessary for the clock to keep the correct time otherwise the clock may run too

fast or too slow.

NOT E:

IMPORTANT: do not confuse “AC POWER INPUT” (16) with the “VIBRATOR INPUT” (15).

Product specificaties

Merk:	Sonic Alert
Categorie:	Alarm ringer
Model:	SBD375sseu

Heb je hulp nodig?

Als je hulp nodig hebt met Sonic Alert SBD375sseu stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Alarm ringer Sonic Alert

Sonic Alert SBP100 Handleiding

18 Mei 2024

Sonic Alert SBD375sseu Handleiding

18 Mei 2024

Handleiding Alarm ringer

Nieuwste handleidingen voor Alarm ringer

Techno Line WT 519 Handleiding

3 December 2024

Techno Line WT 514 Handleiding

3 December 2024

Techno Line WT 193 Handleiding

18 November 2024

Techno Line WT 293 Handleiding

18 November 2024

Techno Line WT 250 Handleiding

18 November 2024

Techno Line WT 2500 Handleiding

18 November 2024

Techno Line WT 435 Handleiding

18 November 2024

Techno Line WT 3000 Handleiding

18 November 2024

Techno Line WT 495 Handleiding

18 November 2024

Techno Line WT 499 Handleiding

18 November 2024