Technisat Viotenne 55 Handleiding

Technisat Satellietantenne Viotenne 55

Lees hieronder de 📖 handleiding in het Nederlandse voor Technisat Viotenne 55 (126 pagina's) in de categorie Satellietantenne. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/126

VIOTENNE 55

Installation

instructions

ENEN

FRFR

PLPL

NLNL

ESES

ITIT

PTPT

CZCZ

SKSK

RURU

NONO

SVSV

FIFI

DÄ

DÄDÄ

SLSL

TRTR

HUHU

DEDE

1. Installing the outside unit

Before commencing the installing process, use the following illustration and table to ensure

that everything that is needed to install the VIOTENNE 55 outside unit has been supplied.

48114 7

6 11/12/14 2 10 3 9/1412

5 14 11/13/14

Number Quantity Item

1 1 Reflector

2 1 Reflector support

3 1 LNB arm

4 1 LNB holder

5 1 Rotating prism

6 1 U-shaped bolt

7 1 Retaining bar

8 4 M6 screw x 12 cross slot

9 1 M6 screw x 16 hexagonal socket

10 1 M6 screw x 35 hexagonal socket

11 2 M6 screw x 65 hexagonal socket

12 4 M6 flat washer x 12

13 2 M6 flat washer x 17

14 10 M6 nut hexagonal

1 Installation instructions

To install the outside unit proceed as follows:

Install the retaining bracket on the rotating prism

> Insert screw 6

66 through the slot in the rotating prism 5

55 so that the thread points away

from the rotating prism.

> Insert retaining bar 7

77 into screw 6

66 as shown in the illustration.

> In each case insert one flat washer 12

1212 onto the two threaded ends of the screw

and screw on a nut , turning it several times.14

Install the rotating prism on the reflector support

> Insert the rotating prism onto reflector support so that the hole in the rotating prism 5 2 5

and the top hole in the reflector support are positioned on top of each other.2

> Insert a screw through a flat washer and into the hole of the rotating prism . 11 12 5

> On the other side, place a flat washer onto the screw , put a nut onto the12 11 14

threads and hand tighten.

> Turn the rotating prism so that its lower corner is pointing at the elevation angle EL,5

corresponding to your location.

> Insert a second screw through the flat washer and into the hole in the reflector11 13

support beneath the rotating prism .2 5

> On the other side, place a flat washer onto the screw , put a nut onto the13 11 14

threads and gently tighten.

Install the swivelling prism on the reflector support

> Hold the reflector in front of reflector support , as shown in the illustration.1 2

> Insert one nut into each of the holes provided on reflector support . 14 2

> Now connect up the reflector and reflector support to each other using the 41 2

screws .8

Fitting the LNB arm onto the reflector support

> Insert LNB arm into the opening on the front of reflector support and push it in3 2

fully, so that it is free of play as it sits in the opening.

If necessary, tap LNB arm gently from the front. If you do so, please ensure that3

you do not bend LNB arm .3

> Insert screw through the hole and screw it into a nut . 10 14

Fitting the LNB onto the LNB arm

> Separate the two parts of the LNB holder from each other and remove the two4

connecting bond bridges.

> Hook the two parts of LNB holder up to each other on the top side.4

> Place the LNB into the opening of LNB holder (the LNB connections must be4

pointing downwards at the back) and fold them together.

> Insert a nut into the LNB holder and screw these together using screw .14 9

> Now insert LNB holder onto LNB arm and ensure that the former hooks into 4 3

LNB arm .3

ENEN

Product specificaties

Merk:	Technisat
Categorie:	Satellietantenne
Model:	Viotenne 55
Kleur van het product:	Grijs
Breedte:	550 mm
Diepte:	550 mm
Diameter:	550 mm
Materiaal:	Staal
Antenne versterkingsniveau (max):	32 dBi
Frequentiebereik:	- GHz