Tascam RC-SS20 Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Tascam RC-SS20 (8 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
D01051920A
RC-SS20
Direct Play Remote Control
OWNER'S MANUAL
2 TASCAM RC-SS20
1–Introduction ...................................................... 2
Main functions ..................................................... 2
Supplied accessories ............................................ 2
Beware of condensation ...................................... 2
Cleaning the unit .................................................. 2
2–Names and Functions of Parts ................... 3
Top panel .............................................................. 3
Rear panel ............................................................ 4
Connection cables ................................................ 4
Cable specifications .................................................... 4
3–Use with an SS-R1 or SS-CDR1 .................. 5
Connecting with an SS-R1/SS-CDR1.................... 5
Setting the SS-R1/SS-CDR1 recorder .................. 5
Flash-starting tracks ............................................. 5
4–Use with an HD-R1 ......................................... 6
Connecting with an HD-R1 .................................. 6
Setting the HD-R1 recorder ................................. 6
Starting a track with direct play .......................... 6
5–Specifications .................................................... 7
Physical ................................................................. 7
Dimensional drawings .......................................... 7
1–Introduction
Thank you very much for purchasing the TASCAM
RC-SS20. This wired remote control provides a direct
play start function when connected to the PARALLEL
connector of a TASCAM SS-R1, SS-CDR1 or HD-R1
unit. This allows you to start playing tracks from the
location of this unit.
Please read this Owner’s Manual carefully and store it
in a convenient place for future reference.
Direct play of 20 tracks when connected with an
β€’ξ˜ƒ
SS-R1 or SS-CDR1 and 16 tracks when connected
with an HD-R1.
Flash-start function allows instantaneous playback
β€’ξ˜ƒ
starting when connected with an SS-R1 or
SS-CDR1.
Illuminated track playback keys for separate tracks.
β€’ξ˜ƒ
EOM indicator shows the end of track playback.β€’ξ˜ƒ
Main functions
Contents
Supplied accessories
The following items are included with this product.
RC-SS20β€’ unit ............................................................1
Owner’s Manual (this document)
β€’ ...............................1
Warranty card
β€’ .............................................................1
Contact TASCAM if any of these items are missing or
appear to have been damaged during transport.
When opening the packaging, please remove the items
carefully to avoid damage. Please keep the box and
packaging for transportation of the unit in the future
Beware of condensation
Cleaning the unit
If the unit is moved from a cold to a warm place, or
used in a room that has just been heated, there is a
danger of condensation. If this occurs, let the player
sit for one or two hours at the new room temperature
before turning the power on.
Use a soft cloth to wipe the unit clean. Do not clean it
with chemical-based wipes, benzene, thinner, alcohol
or similar substances. This could damage the surface
or cause the color to change.
RC-SS20 3
2–Names and Functions of Parts
Top panel
1 Media indicator (CF, CD)
When an SS-R1 is connected:
The CF indicator is always lit.
When an SS-CDR1 is connected:
The indicator for CF or CD is lit according to
the selection made with the SS-CDR1 DEVICE
SELECT key.
When an HD-R1 is connected:
The CF indicator is always lit.
2 EOM indicator
Lights when the unit is receiving an EOM tally
signal from the attached unit.
When used with an SS-R1 or SS-CDR1, the EOM
tally signal output conditions can be set in detail.
When used with an HD-R1, lighting is according
to the signal set by
BUSY2
.
3 LOAD/STOP key
When an SS-R1/SS-CDR1 is connected:
Press this key when stopped to load the data
for the beginning of each track in the current
playback area of the SS-R1/SS-CDR1 into that
unit’s internal memory. The indicator lights
when loading completes. When not in flash start
operation mode or during playback, this indicator
does not light.
Press this key during playback to stop playback.
When an HD-R1 is connected:
Does not function when stopped.
Press this key during playback to stop playback.
4 Playback keys (1–20)
When an SS-R1/SS-CDR1 is connected:
Pressing any key instantaneously starts playback
of the track number corresponding to that key.
The key lights during playback. The indicator
extinguishes when playback ends.
After starting playback, if the unit is put into
playback standby, the indicator blinks.
When an HD-R1 is connected:
Only playback keys 1–16 are usable. Playback keys
17–20 do not function.
Pressing any key between 1–16 instantaneously
starts playback of the track number corresponding
to that key. The indicator lights during playback.
The indicator extinguishes when playback ends.


Product specificaties

Merk: Tascam
Categorie: Afstandsbediening
Model: RC-SS20

Heb je hulp nodig?

Als je hulp nodig hebt met Tascam RC-SS20 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afstandsbediening Tascam

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening