Tandberg Data RDX QuikStation 4 Handleiding

Tandberg Data Disk array RDX QuikStation 4

Lees hieronder de 📖 handleiding in het Nederlandse voor Tandberg Data RDX QuikStation 4 (117 pagina's) in de categorie Disk array. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/117

Product Manual

For QuikStation® 4 and QuikStation 8 Appliances

December 2017

1021970 Rev. C

RDX QuikStation 4 and 8 Product Manual

Sphere 3D Corp.

9112 Spectrum Center Boulevard

San Diego, CA 92123 USA

TEL 1.800.729.8725

1.858.571.5555

FAX 1.858.571.3664

www.sphere3d.com

Overland®, Overland Storage®, ARCvault®, DynamicRAID®, GuardianOS®, NEO®, NEO Series®, PowerLoader®, Protection OS®, RAINcloud®, REO®, REO

4000®, REO Series®, Snap Appliance

®, Snap Care® (EU only), SnapSAN®, SnapScale®, SnapScale X2®, SnapServer®, StorAssure®, Ultamus®, VR2®, and

XchangeNOW® are registered trademarks of Overland Storage, Inc.

Tandberg Data ®

, AccuGuard®, AccuVault®, DPS1000 Series®, DPS1100®, DPS1200®, DPS2000

®, Magnum®, QuikStation®, QuikStor®, RDX®, RDXPRO®,

StorageLibrary®

, StorageLoader®, Tandberg SecureService®

, Tandberg StorageLibrary®, and VXA® are registered trademarks of Tandberg Data, Inc.

Desktop Cloud Orchestrator® and V3® are registered trademarks of Sphere 3D Corp.

Campus Cluster™, NEO Agility™, RapidRebuild™, Snap ECR™, Snap Encrypted Continuous Replication™, SnapExpansion XSR™, SnapScale X4™,

SnapServer DX Series™, SnapServer XSD Series™, SnapServer XSD40™, SnapServer XSR Series™, SnapServer XSR40™, SnapServer XSR120™,

SnapServer Manager™, SnapStorage Manager™, and SnapSync™ are trademarks of Overland Storage, Inc.

BizNAS™, QuadPak™, and RDX+™ are trademarks of Tandberg Data, Inc.

G-Series™, Glassware 2.0™, and SnapCLOUD™ are trademarks of Sphere 3D Corp.

All other brand names or trademarks are the property of their respective owners.

The names of companies and individuals used in examples are fictitious and intended to illustrate the use of the software. Any resemblance to actual

companies or individuals, whether past or present, is coincidental.

PROPRIETARY NOTICE

All information contained in or disclosed by this document is considered proprietary by Sphere 3D Corp. By accepting this material the recipient agrees that

this material and the information contained therein are held in confidence and in trust and will not be used, reproduced in whole or in part, nor its contents

revealed to others, except to meet the purpose for which it was delivered. It is understood that no right is conveyed to reproduce or have reproduced any item

herein disclosed without express permission from Sphere 3D Corp.

Sphere 3D Corp. provides this manual as is, without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Sphere 3D Corp. may make improvements or changes in the product(s) or programs described in this

manual at any time. These changes will be incorporated in new editions of this publication.

Sphere 3D Corp. assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of this manual, nor for any problem that might arise from

the use of the information in this manual.

FW 01.003.05

REVISION HISTORY

Revision DescriptionDate

A June 2016 Initial release

B June 2017 Minor fixes and updates

C December 2017 Minor fixes including static IP configuration

Preface

Audience and Purpose

This guide describes how to install and operate an RDX QuikStation appliance and is intended

for use by anyone deploying the RDX QuikStation 4 or the RDX QuikStation 8 into their

network environment. Familiarity with system and network configuration is highly

recommended.

The information in this guide applies to both the RDX QuikStation 4 and the RDX

QuikStation 8. When there is a significant operational difference, then either the RDX

QuikStation 4 or RDX QuikStation 8 is specified.

Organization

The following chapters are included in this guide:

Overview

•Chapter 1, “Product Overview,” provides an overview of the features and components of

the RDX QuikStation.

Installation and Setup

•Chapter 2, “Initial Setup and Configuration,” describes information on how to rack-

mount, connect, and initially configure the RDX QuikStation.

•Chapter 3, “iSCSI Configuration,” describes how to connect host computers to RDX

QuikStation iSCSI targets, including how to set up iSCSI security.

Using the RDX Remote Management Console

•Chapter 4, “System Configuration,” describes RDX QuikStation system configuration

tasks, such as network configuration and user account management.

•Chapter 5, “Logical Device Management,” provides information about the logical device

interface in the Remote Management Console.

•Chapter 6, “Manage Tape Library Configurations,” shows how to do additional

configuration tasks from the interface.Logical Device

•Chapter 7, “Physical Device Management,” provides information about the physical

device interface in the Remote Management Console, including ejecting RDX media and

reformatting and cloning data.

•Chapter 8, “System Maintenance,” describes RDX QuikStation system maintenance

tasks, such as importing and exporting configuration files and updating firmware.

Product specificaties

Merk:	Tandberg Data
Categorie:	Disk array
Model:	RDX QuikStation 4
Kleur van het product:	Black, Grey
Gewicht:	9770 g
Breedte:	464.5 mm
Diepte:	481 mm
Hoogte:	68 mm
Gewicht verpakking:	13600 g
Breedte verpakking:	605 mm
Diepte verpakking:	655 mm
Hoogte verpakking:	220 mm
LED-indicatoren:	Ja
Meegeleverde kabels:	AC, LAN (RJ-45)
Aantal USB 2.0-poorten:	6
Certificering:	FCC Class AB, UL, CE, TÜV-GS, CB C-Tick, VCCI, AS/NZS CISPR22, NMB-003, KCC, REACH, WEEE
Duurzaamheidscertificaten:	RoHS
Ondersteunt Windows:	Ja
Temperatuur bij opslag:	-20 - 60 °C
Intern:	Nee
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	3
Mac-compatibiliteit:	Ja
Type behuizing:	Desktop
Opslagdrives geïnstalleerd:	Ja
Capaciteit opslag-drive:	4000 GB
Totale geïnstalleerde opslagcapaciteit:	16 TB
Maximaal ondersteunde opslagcapaciteit:	16 TB
Ondersteunt Linux:	Ja
RJ-45 ports hoeveelheid:	1
Aantal storage drives geïnstalleerd:	4
Overdrachtssnelheid:	0.2 Gbit/s
Aantal storage drives ondersteund:	4
AC-ingangsspanning:	100-240 V
AC-ingangsfrequentie:	50 - 60 Hz
Stroomverbruik (typisch):	90 W
Bedrijfstemperatuur (T-T):	10 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Host-poorten:	2
Op afstand bediende managementpoort:	RJ-45 (Gigabit)