Tacx Booster T2500 Handleiding

Tacx Fietstrainer Booster T2500

Lees hieronder de 📖 handleiding in het Nederlandse voor Tacx Booster T2500 (2 pagina's) in de categorie Fietstrainer. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
2nd devices
You may control the trainer with your phone, tablet or
desktop and connect a 2nd device to read your power,
speed and cadence.
Compatibility
• ANT+: all devices
• Bluetooth: Bluetooth 4.0 or higher
Whether to connect this second device via ANT+ or Bluetooth
depends on how your 1st device is connected. Over ANT+ you
can connect as many devices as you’d like to read out your
performance data. Over Bluetooth you can only connect one
device. This means the following:
Read performance data on 2nd device
Quick Start
Smart trainers
Tacx Utility app
Test the connections and download the latest firmware updates.
Compatibility
• iPhone4s and newer
• Android 4.3 and newer
Please follow the steps below before you start
the Utility app for Android:
1. Turn off all apps running in the background
2. Turn off Bluetooth and then turn it back on
3. Start the Utility app
Frequently asked questions
Why and how do I need to calibrate the trainer?
All trainers with a physical transmission (e.g a belt or roller)
need to be calibrated. The trainer determines the resistance in
the transmission: the tyre on the roll or the tension in the belt.
This is used as a reference point to accuretely measure and
apply the needed resistance.
Calibration ensures:
• Realistic road simulation
• Correct measurement of cadence and power
• No slipping
Calibrate the trainer via the app or software you use. Make sure
that your rear tyre is inflated to approximetely 110psi (7 and
8 bar) and the metal roller of the trainer contains no rubber
residue.
T0854D 2016-03 |
Other language available online
http://www.tacx.com/en/service/manuals
EN NL DE FR ES IT CN JP| | | | | | |
NO DK SE FI PL CZ GR| | | | | | | PT
Other language?
The Quick Start guide is online available in 16 languages, go to
https://tacx.com/service/manuals or follow the QR-code below.
ANT+
A desktop can only communicate
with the trainer via ANT+. To
connect a desktop you’ll need an
ANT+ antenna.
How to connect which device?
Connect your device the app or software. Go to [Devices], in
search for the trainer and connect it.
A smartphone can only communicate with the
trainer via Bluetooth.
Some tablets are equipped with an ANT+
receiver. If so, you can choose to connect
your tablet via ANT+ ór Bluetooth. If not,
you can only connect via Bluetooth.
Option 1
If your 1st device is connected
via Bluetooth you can connect
the other device(s) via ANT+
Option 2
If your 1st device is connected
via ANT+ you can connect
the other device(s) via either
Bluetooth and/or ANT+
Need help?
Maybe you can find an answer on our website:
www.tacx.com/en/service
Or contact our support team via Facebook, Twitter or e-mail.
@tacxsupport
www.facebook.com/tacxvr
support tacx.com@
The possibilities
For an interactive ride on a Tacx Smart trainer you may use the
Tacx apps, but you can also opt for Zwift, TrainerRoad, Kinomap
and Bkool software.
As the trainer communicates over ANT+ and Bluetooth it’s
possible to read out your performance data on a 2
nd device on
top of controlling it with the previously mentioned software.
Connect with a computer
To ride with the Tacx Trainer software, or other computer
software, you’ll need an ANT+ antenna to enable the
communication between your trainer and the computer.
Control of trainers resistance
ANT+
1. Tacx apps
3rd Party apps
Various training options
Compatibility
Apps with ANT+ FE-C or Bluetooth open, like: TrainerRoad,
Kinomap, FulGaz, Sufferfest, Virtual Training, BKool
Bike computers
Workouts according to ridden GPS tracks.
Compatibility
Devices with ANT+ FE-C, like: Garmin Edge 520 & 1000
2. 3rd party apps
Tacx Training app (free)
Workouts according to slope, power and heart rate.
Compatibility Bluetooth only
Bluetooth 4.0 integrated smartphones:
• iPhone4s and newer
• Android 4.3 and newer
Tacx Cycling app (free)
Videos of existing bike courses* and 3D tracks.
Compatibility
ANT+ or Bluetooth 4.0 integrated tablets:
• iPad 3 and newer (BT only)
• Android 4.3 and newer (ANT+ or BT)
No ANT+ or Bluetooth 4.0 integrated?
3. Bike computers 4. Tacx Trainer software 4, Advanced (PC)
Tacx Upgrade Smart needed, available online and in stores
Tacx Training software
Virtual worlds, multiplayer*, bike course videos*, 3D tracks.
Compatibility Windows only
Windows 7 or newer
Check the Tacx website for the
complete list of compatible software.
5. 3rd party desktop software
ANT+ antenna needed, Tacx Antenna available online and in stores
3rd party software
Various training options
Compatibility
Zwift, TrainerRoad, Sufferfest, Cycleops (PC only), BKool.
Check the Tacx website for the
complete list of compatible software.
Download the Tacx PC Test program to find out whether or not
your Windows PC is suitable for the Tacx Trainer software 4, Advanced
Tacx Cloud
Both Tacx apps are connected to the Cloud. With the Tacx
Cloud you’ll have your performed training sessions and
preprogrammed trainings available on any device.
Registering is free and simple, via your Facebook or Google+ account.
Go to cloud.tacx.com and give it a try!
*Sections of courses only,
available as in-App purchases
*License needed, available in Tacx webshop
iPad: use Wahoo ANT+ Dongle
and Apple lightning adapter
iPad 2 is compatiblenot
Android tablet with micro
USB input: use the Tacx ANT+
Dongle micro USB (T2090)


Product specificaties

Merk: Tacx
Categorie: Fietstrainer
Model: Booster T2500

Heb je hulp nodig?

Als je hulp nodig hebt met Tacx Booster T2500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fietstrainer Tacx

Handleiding Fietstrainer

Nieuwste handleidingen voor Fietstrainer