Synamodec Dementor Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Synamodec Dementor (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 205 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24 25 26 27 28
FILTER CONTROLS
Level 1 input level 1
Level 2 input level 2
Resonance control
Cut-o control 
Rate for resonance modula on ξ˜‚
Rate for cut-o modula on  ξ˜‚
Mod, lfo output level for resonance
Mod, lfo output level for cut-o 
1.2 Eq / lter bass ξ˜ƒ
3.4 Eq / lter media ξ˜ƒ
5.6 Eq / lter treble ξ˜ƒ
Level, input level to nuances and device output
Feedback, input level to nuances taken from the output of this
Rate lfo for me modula on of the echo / delay (paranormal) ξ˜‚ ξ˜‚
Mod, lfo output level for me modula on ξ˜‚ ξ˜‚
To Paranormal, send the output signal nuances to the OUT
or eco / delay (paranormal)
Level Processor entry level
Time, delay me control ξ˜‚
Echo level, eect level
Repeat, control of number of repe ons (echo) ξ˜‚ξ˜‚
OUT, device output
IN 1,2, inputs to device
ON / OFF switch
28v dc power input
INSTRUCTIONS
1. Set all pots to zero, cut-o at 12, Time at 12 and the To Paranormal switch on the le .  ξ˜„
2. Plug two di erent inputs (for example one square wave and one white noise). This
device can accept signals maximum of 10Vpp,
3. Plug the Out jack to your mixer.
Lets play!
1. Increase the input levels as well as the level of the nuances. Now, you can hear the
output signal. Manually play with the Cut-o and Resonance pots. 
2. Cut-o and Resonance can be managed by the LFOs. 
3. Increase the level of the Nuances pots one by one and reset them to zero. You will
appreciate how work the six pots (1,2,3,4,5,6).
a. 1,2 will enhance the bass
b. 3,4 the mids
c. 5,6 the treble,
4. You can also apply the level of feedback that you like, keep in mind that if the signal is
very enhanced with the nuances, especially the bass, increasing the feedback. To much
satura ons will produce strange signals. ξ˜‚
5. Repeat this procedure using other signa, (white noise, synth pad, etc.)
6. The Switch to paranormal send the signal to the Eco / delay sec on. Time parameter ξ˜‚
can be LFO modulated .
2
3
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 26
27
28


Product specificaties

Merk: Synamodec
Categorie: Niet gecategoriseerd
Model: Dementor

Heb je hulp nodig?

Als je hulp nodig hebt met Synamodec Dementor stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Synamodec

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd