Syma Z3 Handleiding

Syma Drone Z3

Lees hieronder de 📖 handleiding in het Nederlandse voor Syma Z3 (16 pagina's) in de categorie Drone. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
12+
MAIN FEATURES
●Utilizes the 4-axis structure, enabling the drone to be even more
flexible and speedy. It suitable for for both spacious indoor &
outdoor areas.
●Built-in 6-axis gyro stabilizer, barometer and optical flow sensor to
ensure the accuracy of inflight position.
●Be capable of 360°stunt flip function,optical flow positioning,
auto hover function.
●Headless function makes it easy for directional control.
●Auto take-off and landing function make it easier and safer to control.
●HD camera with real-time transmission function for getting
the fun of aerial photography.
●With flight plan function, when the drone is controlled by mobile
phone.
FOLDING DRONE
USER MANUAL2
-1-
Safety Guide
Repair and maintenance
1.Please store the smaller-sized drone accessories in places that are out of
reach of children.
2.This drone is very powerful. For all first-time flights, the left joystick must be
slowly pushed up in order to prevent the drone from ascending too fast to
avoid unnecessary collision and possible damage and injury.
3.When the flight is ended, first turn off the power of the remote control.
Then turn off the power of the drone.
4.Avoid placing the batteries in places with high temperatures and exposure
to heat.
5.Take extra precaution to ensure that the drone is at a minimum distance of
15 feet from the pilot, other people, and animals in order to prevent bodily
injury during flight operation. A minimum separation distance of 20 cm must
be maintained between the user’s body and the device under normal use
condition.
6.This drone is for people ages 12+. It must be flown always within the line of
sight of the pilot(or instructor) and flown safely.
7.Non-rechargeable batteries are not to be recharged; Batteries are to be
inserted with the correctpolarity; Different types of batteries or new and
used batteries are not be mixed.
8.When the drone is not in use, please remove the batteries in the remote
control.
9.The supply terminals are not be short-circuited.
10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total
flight time) if it will not be used for 10 days or more, this can greatly extend
the battery life.
11.Please keep a safe distance from the spinning propellers to avoid injury.
12.To ensure the electromagnetic environment requirement of the aviation
radio (station), using remote controls in the zone, which is in a radius of
about 5000m zone from the circle center of the airport runway, is forbidden.
All users also should abide by the regulation of the radio set forth by
government and regulatory agencies including the duration and area.
13.Only uses the recommended transformer for the model, and the transformer
is not a model. Disconnect the transformer from the model which is available
cleaning with liquids before cleaning. Check the cord, plug, enclosure and
other parts of the transformer regularly. If any damages have been
discovered, please immediately stop using it, until it was completely repaired.
14.Never look steadily at the laser beam since the laser radiation.
15.Attention Drone assembly under adult supervision.
16.The pilot is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
17.Open the battery cover of the toy with screwdriver.
18.The packing has to be kept since it contains important information.
1.Use dry and soft cloth to clean this product.
2.Avoid exposing this product to heat.
3.Do not immerse this product in water, otherwise, the electronic parts will be
damaged.
4.Transformers used with the toy are to be regularly examined for damage to the cord,plug,
enclosure and other parts,and that,in the event of such damage,the toys must be used with
this transformer until the damage has been repaired.
-2-
Protective Gears Installation Methods
Fold operation
Installation of Mobile Phone Retaining Clip
Package description
●Drone
●Remote Control
●User Manual
●4 Blades
●Charging Cable
●4 Protective Gears
●Mobile Phone Retaining Clip
2. Insert the fixed rods on the protective
gear into the two sockets in the arm of
the drone as shown and fix them tightly.
1. Insert the protective gear into the
arm of the drone as shown.
1.Pull up the phone clip
cover from behind the
remote control.
3. Press the handles to
adjust the jaws.
2.Insert the phone clip
holder into the
connector at the top
of the remote control.
Mobile phone retaining clip’s attachment method:
2. Manually fold the arm in the direction
of the arrow until it is fully folded.
1. Manually extend the arm in the
direction of the arrow until it is fully
extended.
The following items can be found in this product package:


Product specificaties

Merk: Syma
Categorie: Drone
Model: Z3

Heb je hulp nodig?

Als je hulp nodig hebt met Syma Z3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Drone Syma

Handleiding Drone

Nieuwste handleidingen voor Drone