Swann SW351-MD2 Handleiding

Swann Alarmsysteem SW351-MD2

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann SW351-MD2 (4 pagina's) in de categorie Alarmsysteem. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Operating Instructions

Magnetic Window

Alarm SW351-MDA

™

Advanced security made easy

222

Congratulations on your purchase of this stand-alone window alarm from ! This Swann

alarm unit is a simple, easy to install security device which will help you to protect one door

or window from unwanted intrusion.

This magnetic window alarm unit can effectively protect a single window (or door) being

opened, though it cannot prevent a window being broken. Thus, for more complete

protection of a window, we suggest using either infrared alarm or a glass breakage alarm

as a backup to the door alarm.

This package includes:

Magnetic Window Alarm

Double-Sided Mounting Tape

Operating Instructions

• Do not expose any part of the alarm unit to any sudden shocks (such as being dropped

or struck).

• Do not install the alarm unit near devices which generate magnetic ﬁelds (such as

microwaves).

• Do not install any the alarm unit in direct sunlight.

• Use only alkaline batteries.

• All components are for indoor use only. Do not install outdoors.

• Replace the batteries in the unit every six months.

• Test the alarm periodically (every 1 - 2 months and each time you change the

batteries) to ensure it is working properly.

• This alarm system is designed to be, and acts as, a theft deterrent. This system,

like any other, cannot offer complete protection for your home or business - it

is simply an alarm system. Like all practical systems, it has limitations and it could be

disabled by a skilled intruder. We suggest that you avoid relying solely on this magnetic

alarm unit to protect your property, but use it as part of a comprehensive security

solution. You can increase your level of protection through the use of high-quality

locks, stronger doors, guards for your windows and a CCTV system and recording

devices.

IMPORTANT - Read Before Installing

Overview

Battery Compartment

Siren Magnetic

Trigger

Battery

Indicator LED

Alarm Unit

How it works:

The sensor is composed of two separate, equally important parts: the alarm unit itself, and

the trigger. The alarm unit is the larger of the two parts, and is responsible for sounding the

alarm (hence the siren). Inside the transmitter is a magnetically sensitive switch, which is

held in the OFF position by the magnetic trigger.

When the trigger is moved farther than approximately 1/2” (10-15mm) away from the door

sensor, the switch closes to the ON position and the alarm is triggered.

Arming and Disarming

The arming/disarming switch is located underneath the battery compartment, just above

the battery slot. There are only two settings, ON and OFF. Whilst ON, the alarm will sound

whenever the two parts of the alarm are separated. Whilst OFF, the alarm will not sound

under any circumstances.

• To arm the sensor, simply set this switch to ON.

• To disarm the unit or stop an alarm in progress, set the switch to OFF.

Mounting

Included are two portions of double-sided tape, one for both the alarm unit and the

magnetic trigger.

1. Remove the plastic cover from one side of the larger piece of double sided tape, and

apply the tape to the rear side of the alarm unit.

2. Remove the plastic cover from one side of the smaller piece of mounting tape, and

apply to the rear of the magnetic sensor.

3. Clean the surfaces you want to mount the alarm on using cleaning alcohol or similar.

Ensure the surfaces are completely clean and dry before proceeding.

4. Remove the plastic cover from the other side of the double-sided tape, and apply one

part of the alarm to the door/window you want to monitor, and the other part to the

frame. Ensure that when the door/window is shut, the small black arrows on the sensor

and trigger line up. They don’t need to physically touch, but they should be no more

that 1/5”(5mm) apart when the door/window is shut for the sensor to work correctly.

Replacing Batteries

1. Open the battery compartment on the front of the of the sensor.

2. Remove any old batteries.

3. Place four fresh alkaline LR44 batteries into the sensor. The correct orientation is shown

on the base of the battery compartment.

4. Use only alkaline batteries. Do not use rechargeable batteries.

5. To test the curret state of your batteries, press the TEST button, located in the battery

compartment. If the Battery Indicator LED will lights up then the batteries have enough

power to operate the alarm. If it does not light up or is dim, then you should replace

the batteries as soon as possible.

Technical Speciﬁcations

Power Requirements 4 x LR44 Button Cell Batteries (6V DC)

Siren Duration 60s (approx.)

Siren Volume >110dB

Magnetic Switch Trigger Range 10mm ~ 26mm

Product specificaties

Merk:	Swann
Categorie:	Alarmsysteem
Model:	SW351-MD2
Kleur van het product:	Wit
Soort:	LR44
Gebruikershandleiding:	Ja
Accu/Batterij voltage:	6 V
Smartphone ondersteuning op afstand:	Nee
Aantal gelijktijdig verbonden apparaten (max):	2
Aantal bewegingssensoren:	- stuk(s)
Alarm decibels:	110 dB
Aantal deur-/raamsensoren:	2 stuk(s)