SVS SoundPath Tri-Band Wireless Audio Adapter Handleiding

SVS Niet gecategoriseerd SoundPath Tri-Band Wireless Audio Adapter

Lees hieronder de šŸ“– handleiding in het Nederlandse voor SVS SoundPath Tri-Band Wireless Audio Adapter (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 74 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
TRI-BAND WIRELESS AUDIO
ADAPTER
Ownerā€™s Manual
Thank you for choosing SVS!
Congratulations on bringing home the , the SVS SoundPath Tri-Band Wireless Audio Adapter
best solution available for eliminating subwoofer cable clutter without sacriļ¬cing performance.
Because it passes a full-range Left/Right stereo signal, you can also wirelessly connect stereo
speakers, powered surround sound speakers, ampliļ¬ers, and any stereo audio component.
The SoundPath Tri-Band Wireless Audio Adapter operates in the 2.4 GHz, 5.2 GHz and 5.8 GHz
bands and is highly resistant to all forms of wireless interference from common household
devices. Seamless switching between channels ensures your subwoofer, speakers or other audio
components will remain connected in even the most congested wireless environments so you can
always enjoy uninterrupted listening experiences.
Installation requires only a few simple steps. If you have questions about subwoofer or speaker
placement, system optimization or installing the SVS SoundPath Tri-Band Wireless Audio Adapter,
please contact the SVS Sound Experts tech support 7-days-a-week.
custservice@svsound.com | 877.626.5623 | www.svsound.com
Speciļ¬cations & Features
Adapter Includes
Ā» Tri-Band Wireless Audio Transmitter
Ā» Tri-Band Wireless Audio Receiver
Ā» Mono RCA to RCA interconnect cable (x2)
Ā» USB A to micro B power cable for power adaptor (x2)
Ā» 5V DC power adapter with USB A Connector (x2)
Ā» Velcro for securing devices (x2)
What You Will Need
Ā» Output device (subwoofer, powered speakers or ampliļ¬er)
Ā» Source device (AV receiver, surround processor, or 2-channel pre-amp with a subwoofer pre-out
or L/R line level pre-out)
Speciļ¬cations
Operating Voltage
RF Frequency Band
Sample Rate
Working Distance
Transmitter analog input level
Receiver analog output level
Frequency Response
Latency
THD+N (dB)
SNR (dB)
Receiver
Minimum power requirement:
4.75V @0.3ARF
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
N/A
Maximum 1Vrms
6Hz ā€“ 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz ā€“ 20kHz)
+ 105 dB 10Hz ā€“ 20kHz
Transmitter
Minimum power requirement:
5V @0.5A
Tri-Band (auto switching)
2.4/5.2/5.8 GHz
48kHz
Up to 130 feet; line of sight
Maximum 2Vrms
N/A
6Hz ā€“ 20 kHz +/- 0.5 dB
< 19 milliseconds
-70 dB (10Hz ā€“ 20kHz)
+ 105 dB 10Hz ā€“ 20kHz
General Placement and Set-up Tips
Ā» Place the subwoofer, powered speaker or ampliļ¬er at its intended location.
Ā» Try to maintain line-of-sight (no walls or solid barriers) between the transmitter
and receiver for best results.
Ā» Receiver should be within 130 feet of transmitter for best results.
Ā» Avoid placing the transmitter next to devices that could create signal interference, such as mobile
phones, baby monitors, RF wireless phones and Wi-Fi routers.
Connecting the Wireless Transmitter to an AV processor
1. Connect the mono RCA cable to the subwoofer out or LFE channel of the AVR or pre-amp
processor to the R/LFE input on the wireless transmitter.
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC power
supply. You can also use an available USB charging port with an output of at least 5V @ 0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
Connecting the Wireless Transmitter to a 2-channel stereo pre-amp
1. Connect a stereo RCA cable to the L and R line level pre-outs of the 2-channel stereo
pre-amp and to L and R input on the wireless transmitter. ā€“ CABLE NOT SUPPLIED
2. Connect the USB A to Micro B cable to the wireless transmitter and the included 5 VDC
power supply. You can also use an available USB charging port with an output of at
least 5V @0.5A
3. If using the 5 VDC power supply, connect to nearby power outlet.
CENTER
REAR FR
SUBWOOFER
(SUB1)
LINE LEVEL OUTPUTS
dio In
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R
LINE LEVEL OUTPUTS REAR FRONT
R
L
RECEIVER/PREAMP
Audio In
(Transmitter)
L
P Power air
R

Product specificaties

Merk: SVS
Categorie: Niet gecategoriseerd
Model: SoundPath Tri-Band Wireless Audio Adapter

Heb je hulp nodig?

Als je hulp nodig hebt met SVS SoundPath Tri-Band Wireless Audio Adapter stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd SVS

SVS

SVS SoundPath Speaker Level Subwoofer Adapter Handleiding

16 Juli 2024
SVS

SVS SoundPath Wireless Audio Adapter Handleiding

14 November 2023
SVS

SVS SoundPath Tri-Band Wireless Audio Adapter Handleiding

14 November 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo VAVE-P17-TP-5YL1-P Handleiding

21 November 2024
Festo

Festo SD-SUB-D-BU9 Handleiding

21 November 2024
Festo

Festo SAMH-F12-MK Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024