SureFire Stiletto Pro Handleiding

SureFire Zaklamp Stiletto Pro

Lees hieronder de 📖 handleiding in het Nederlandse voor SureFire Stiletto Pro (2 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
MULTI-OUTPUT RECHARGEABLE POCKET LED FLASHLIGHT
PLR-B
USER MANUAL
18300 MT. BALDY CIRCLE
FOUNTAIN VALLEY, CA 92708-6122
SUREFIRE.COM
Revision B 10-2019
71-01-1090
PLR-B
STILETTO PRO
OUTPUT Low: 25 Med: 300 High: 1,000 lumens
RUNTIME Low: 23.5 Med: 1.5 High: 1.0 hours
STROBE RATE Tactical Switch: 9 Emergency: 3-4 Hz
PEAK BEAM INTENSITY 5,100 candela
DISTANCE 142 meters
CONSTRUCTION Aluminum
FINISH Black
WEIGHT (w/batteries) 4.0 oz (113 g)
LENGTH 4.5 in (11.4 cm)
BEZEL DIAMETER 0.87 in (2.2 cm)
BATTERIES Lithium polymer rechargeable (integrated)
SWITCHING Primary, Tactical, and Programming
LIQUID INGRESS
PROTECTION
IPX7
All performance claims tested to ANSI/NEMA FL1-2009 Standard.
SPECIFICATIONS
THE SUREFIRE NO-HASSLE GUARANTEE
We’ll do what it takes to keep your SureFire gear running smoothly. SureFire
warrants that if you our customer purchase one of our products, and we
determine that it is defective in material and/or workmanship during your lifetime, we
will repair or replace it — no hassle!
Our warranty does not cover consumables or normal wear-and-tear — things like
batteries draining, headbands and headpads wearing out, ink cartridges running
out, and switches wearing out or damage resulting from abuse, alterations,
unauthorized repairs, or use contrary to SureFire’s user manuals.
Should you need a replacement product, SureFire reserves the right to replace an
obsolete product with a current production, like model. In the event that any issue with
a SureFire product is not covered under this warranty SureFire can arrange to have
the product repaired for a reasonable fee.
STANDARD DISCLAIMER
Except as specified above or prohibited by applicable law: all express or implied
conditions and warranties, including, without limitation, any implied warranty or
condition of merchantability or fitness for a particular purpose, or accuracy of any
informational content, are hereby excluded and disclaimed by SureFire; and in no
event will SureFire be liable for any special, direct, indirect, consequential, incidental
or punitive damages howsoever arising and regardless of the theory of liability, even if
advised of the possibility of such damages. Products, prices, availability, specifications,
and offers are subject to change or cancellation at any time without notice.
WARRANTY CLAIMS
For claims, contact Customer Service at 714-545-9444 to obtain a Return
Merchandise Authorization number (RMA#). Then package the unit carefully
and send to (no CODs):
SureFire, LLC.
Repairs Department, RMA#____
17680 Newhope Street, Suite B
Fountain Valley, CA 92708
SureFire will pay any reasonable shipping costs to return the unit to you.
Do not attempt to remove or replace the STILETTO PRO battery. Doing
so will void the warranty. If the STILETTO PRO needs to be repaired,
contact SureFire at 714-545-9444 or technicalsupport@surefire.com.
BATTERY INFORMATION & WARNING
KIT CONTENTS
STILETTO PRO
USB-TO-MICRO USB cable
T8 Torx Wrench
FUEL GAUGE
The STILETTO PRO is equipped with a LED that displays the battery status, both during use and while charging.
CHARGING THE STILETTO PRO
The STILETTO PRO is powered by an integral lithium polymer (LiPo) battery (950 mAh).
The STILETTO PRO’s MICRO USB port is for charging input only (Standard 5V, 500 mA).
How to charge the LiPo rechargeable battery:
1. Insert the MICRO USB cable plug into STILETTO PRO charging port.
2. Insert USB cable plug into a USB port of a computer or another device that will provide
power to the STILETTO PRO.
3. When the fuel gauge turns green, the STILETTO PRO is charged to more than
95% of battery capacity.
NOTE: The SureFire FIREPAK™ and GUARDIAN
® will charge the STILETTO PRO approximately
two times.
NOTE: Charging a fully depleted battery can take up to three hours. The light may be left plugged into
the charger without damaging the battery.
NOTE: When the
STILETTO PRO
is being charged and the temperature is too cold (Below 32°F/0°C)
or too hot (Above 12F/50°C), the fuel gauge will blink yellow which indicates charging stopped.
Once the temperature reaches 4F/5°C or 113°F/4C, it will continue charging. When the battery
is drained below 3.0V, the STILETTO PRO has a pre-charge mode when connected to a charger. The
Fuel Gauge will blink red rapidly until the battery reaches 3.1V. Once the battery has a minimum of
3.1V, the Fuel Gauge conditions above will apply.
LIGHT OPERATION - PROFILE CONFIGURATION
PRIMARY switch: activates the light in the various outputs
PROGRAMMING switch: see “HOW TO CHANGE PRIMARY AND TACTICAL MODES”
TACTICAL switch: for momentary, strobe or constant-on output
Primary Switch Activation
Mode 1 (Default): Press the PRIMARY switch to cycle from LOW to MEDIUM to HIGH to OFF. The cycle
will repeat if the PRIMARY switch is pressed within two seconds. If the STILETTO PRO is activated on
either LOW, MEDIUM or HIGH and the PRIMARY switch has not been pressed within two seconds,
the next press shuts the light OFF. The last used output is not remembered.
Mode 2: Same as above, but with the cycle changed to HIGH to MEDIUM to LOW to OFF.
Tactical Switch Activation
Mode 1 (Default ; TACTICAL & STROBE): Press and hold the TACTICAL switch for HIGH only; release
the switch to shut OFF. For STROBE, rapidly tap the TACTICAL switch three or more times and hold
down on the 3rd+ press. Release the switch to shut the STROBE OFF.
Mode 2 (Constant-on): Press the TACTICAL switch for constant-on in HIGH only. When the switch is
pressed again, the light will shut OFF.
EMERGENCY MODE Activation
Press and hold the PROGRAMMING switch for five seconds or more to activate the MEDIUM frequency,
MEDIUM output STROBE. Press the PRIMARY or TACTICAL switch to shut EMERGENCY MODE OFF.
HOW TO CHANGE PRIMARY AND TACTICAL MODES
The PROGRAMMING switch is used to select the behavior of the PRIMARY and TACTICAL
output buttons. The STILETTO must be off to change modes. The PRIMARY and TACTICAL
switches are changed independently (Ex: PRIMARY switch can be on MODE 1 and TACTICAL
switch can be on MODE 2.)
Changing the modes for either the PRIMARY or TACTICAL switches:
Step 1: Press and hold the PROGRAMMING switch for two to five seconds. The Fuel Gauge
LED will illuminate BLUE to indicate programming mode.
Step 2: While holding the PROGRAMMING switch and observing the BLUE LED Fuel
Gauge, tap either the PRIMARY or TACTICAL switch once and release the
PROGRAMMING switch. Pressing the PRIMARY or TACTICAL switch more than
ONCE exits the programming mode. Once the PROGRAMMING switch is released,
the Fuel Gauge LED blinks GREEN three times for success or RED three times for error.
POCKET CLIP RELOCATION
1. Rotate T8 Torx screws counter clockwise with supplied wrench to remove the
two pocket clip screws.
2. Place pocket clip on STILETTO PRO body in desired position.
3. Rotate T8 Torx screws clockwise with supplied wrench. Tighten screws to 1.4 inch pounds of
torque. If torque wrench is not available, tighten screws an additional 1/4 turn once resistance
is felt. DO NOT OVERTIGHTEN. The STILETTO PRO body is die cast aluminum. If the screws are
overtightened, the screw holes can become stripped, which could void the warranty.
FUEL GAUGE LED INDICATOR
CHARGING DISCHARGING
SOLID GREEN 100% Charged, Max Capacity 95-100% Charged
SOLID YELLOW Charging, Medium Capacity Battery Charge Low (reduce light
output level or recharge)
SOLID RED Charging, Low Capacity Recharge Immediately
FLASHING RED Pre-charge mode Battery Critically Low
PRIMARY
SWITCH
MICRO-USB
PROGRAMMING
SWITCH
FUEL GAUGE LED
TACTICAL
SWITCH
STROBE WARNING
Exposure to strobing lights may cause dizziness, disorientation, and nausea. A very small
percentage of people suffer from photosensitive epilepsy—approximately .00025% of the
population—and may experience seizures or blackouts triggered by strobing lights. Visit www.
epilepsyfoundation.org for more information about this rare form of epilesesy. Anyone who has
had symptoms linked to this condition should consult a doctor before using this product.
To Disable Lockout Mode:
1. Press the and PRIMARY TACTICAL switch simultaneously, then release.
NOTE: The PRIMARY, TACTICAL and PROGRAMMING switches will be instantly ready for use when
Lockout Mode is disabled.
To Enable Lockout Mode
1. Press and hold the and switch simultaneously for two seconds, then release. PRIMARY TACTICAL
2. The green Fuel Gauge LED will blink twice to confirm Lockout Mode is enabled.
NOTE: The PRIMARY, TACTICAL and PROGRAMMING switches will not activate the PRO STILETTO
when Lockout Mode is enabled.
LOCKOUT MODE


Product specificaties

Merk: SureFire
Categorie: Zaklamp
Model: Stiletto Pro

Heb je hulp nodig?

Als je hulp nodig hebt met SureFire Stiletto Pro stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp SureFire

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp

Fenix

Fenix E12 V2.0 Handleiding

19 November 2024
Fenix

Fenix TK16 V2.0 Handleiding

19 November 2024
Fenix

Fenix E09R Handleiding

19 November 2024
Fenix

Fenix HM60R Handleiding

19 November 2024
Ledlenser

Ledlenser T² Handleiding

18 November 2024
Ledlenser

Ledlenser P14 Handleiding

18 November 2024
Ledlenser

Ledlenser F1R Handleiding

18 November 2024
Ledlenser

Ledlenser P2BM Handleiding

18 November 2024
Ledlenser

Ledlenser A3 Handleiding

18 November 2024
Ledlenser

Ledlenser H3 Handleiding

18 November 2024