Supermicro SuperServer F619H6-FT Handleiding

Supermicro Server SuperServer F619H6-FT

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer F619H6-FT (11 pagina's) in de categorie Server. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Information for Lot 9 of d )ErP (Eco esign
This addendum addresses E European Union (EU) codesign requirements for servers and storage
products ddendum product. All and ratings within this a data are in reference only Supermicro to the (s) in
the manual. The below information ommission conforms to in Annex II of requirements laid down the C
R . egulation 2019/424
3(1)(a): e See Section 1.1 of th system manual for the product type.
3(1)(b): See the title page and preface of the system manual for the trademark and
manufacturer’s address.
3(1)(c): (s). See the title page of the system manual for product model number
3(1)(d): . See the serial number on the physical system to determine the year of manufacture
3(1)(e-j): PSU E actor V ) (F fficiency and Power F alue (Table rom 80 Plus report)
PSU Model #: PWS- -706P 1R
Watts: 2200W
PSU E fficiency
Power
F actor
% of R Lated oad
% % % %10 20 50 100
50 %
Single O - )utput (AC DC
93.3%
9 % 6.07
96.26%
94.37 %
0.99
E P System (EUT) fficiency in I Sdle tate ower (Table)
Representative
Configurations
Calculated Idle Power
Allowance per Node (W)
High nd -E Performance
C onfiguration
472.44
Typical Configuration
448.94
Low erformance -E Pnd
C onfiguration
196.16
System E P(EUT) fficiency in A Sctive tate ower (Table)
Representative
Configurations
Active tate S
E Score fficiency
(Effserver)
Minimum A Sctive tate
Efficiency for 2-Socket
S erver
High nd -E Performance
C onfiguration
39
Typical Configuration
39.1
8
Low erformance -E Pnd
C onfiguration
18.9
3(1)( is k): The operating condition class A2.
Dry bulb °Ctemp
Humidity range, non-condensing
Operating
condition
class
Allowable
range
Recom
mended
range
Allowable range
Recommended range
Max dew
point (°C)
Maximum
rate of
change
(°
C/hr)
A1
15- 32
18-27
–
12 (DP) °C P Dew oint and
8
% relative humidity (RH) to
17 ° C DP and 80 % RH
–
9 °C DP to
15 °C DP and
60 % RH
17
5/20
A2
10-35
18-27
–
12 °C and 8 % DP RH to
21 80 RH °C and DP %
Same A1 as
21
5/20
A3
5-40
18-27
–
12 °C and 8 % DP RH to
24 85 RH °C and DP %
Same A1 as
24
5/20
A4
5-45
18-27
–
12 °C and 8 % DP RH to
24 90 RH °C and DP %
Same A1 as
24
5/20
3(1)(l): The idle state power at the higher boundary temperature of the operating conditions
class is 406.1W.
3(1)( is 39m): The active state efficiency and performance .
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe
devices. Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Sec
ure_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and
model information.
3(1)(o): . List of recommended combinations of blade servers with chassis: N/A
3(1)(p) - -FT. List of all current SKUs within this product family: SYS F619H6
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of eodymium in the HDD is if manufactured by Western n 0.0
Digital, and is 25 grams if manufactured by Seagate.between 5-
3(3)(b): s.Please see the disassembly instructions on the next page


Product specificaties

Merk: Supermicro
Categorie: Server
Model: SuperServer F619H6-FT

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer F619H6-FT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Supermicro

Handleiding Server

Nieuwste handleidingen voor Server