Supermicro SuperServer 5018A-MHN4 Handleiding

Supermicro Server SuperServer 5018A-MHN4

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 5018A-MHN4 (47 pagina's) in de categorie Server. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/47
SUPER
S SUPER ERVER
5018A-MHN4
Revision 1.0
®
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturers instruction manual, may cause harmful interference
with radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0
Release Date: February 19, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 5018A-MHN4.
Installation and maintenance should be performed by experienced technicians only.
The SuperServer 5018A-MHN4 is a 1U rackmount server based on the SC813MTQ-
202CB server chassis and the Super A1SRM-2758F motherboard. Please refer to
our web site for updates on supported processors.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super A1SRM-2758F moth-
erboard and the SC813MTQ-202CB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 5018A-MHN4
into a rack and check out the server con guration prior to powering up the system.
If your server was ordered without the processor and memory components, this
chapter will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Warning Statements
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 5018A-MHN4.
iii
Preface


Product specificaties

Merk: Supermicro
Categorie: Server
Model: SuperServer 5018A-MHN4
Kleur van het product: Zilver
Gewicht: 3620 g
Breedte: 437 mm
Diepte: 503 mm
Hoogte: 43 mm
LED-indicatoren: Ja
Aan/uitschakelaar: Ja
Processorfamilie: Intel
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 7
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 3
Netvoeding: 200 W
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Temperatuur bij opslag: -40 - 70 °C
Processor socket: BGA 1283
On-board graphics adapter model: Aspeed AST2400
Luchtvochtigheid bij opslag: 5 - 95 procent
Type behuizing: Rack (1U)
ECC: Ja
Geheugen form factor: 240-pin DIMM
Ethernet interface type: Fast Ethernet, Gigabit Ethernet
Koperen ethernetbekabelingstechnologie: 1000BASE-T, 100BASE-TX, 10BASE-T
Ondersteunde opslagstationinterfaces: SATA II
Seriële poort(en): 2
PCI Express x8 slots: 1
Geheugen voltage: 1.35, 1.5 V
Aantal SATA III connectors: 2
Non-ECC: Ja
Compatibele processors: Intel Atom®
Aantal ondersteunde processoren: 1
Aantal DIMM sloten: 4
Ondersteunende RDIMM klok snelheden: 1333,1600 MHz
Ondersteunend DIMM module capaciteiten: 16GB, 2GB, 4GB, 8GB
Aantal storage drives ondersteund: 4
Opslagschijf afmetingen ondersteund: 3.5 "
Ondersteunde geheugen types: DDR3-SDRAM
Hot-swap HDD bays: Ja
Bedrijfstemperatuur (T-T): 10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
Code geharmoniseerd systeem (HS): 84714100
BIOS type: AMI
Grootte BIOS-geheugen: 128 Mbit
ACPI version: 5.0
Aantal SATA II connectors: 4
IPMI LAN (RJ-45) port: Ja
BIOS-functies: UEFI

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer 5018A-MHN4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Supermicro

Handleiding Server

Nieuwste handleidingen voor Server