Supermicro SuperServer F618R3-FT Handleiding

Supermicro Server SuperServer F618R3-FT

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer F618R3-FT (146 pagina's) in de categorie Server. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/146

USER'S MANUAL

Revision 1.0b

FatTwin

F618R3-FT

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0b

Release Date: March 12, 2019

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the FatTwin™ F618R3-FT.

Installation and maintenance should be performed by experienced technicians only.

The FatTwin F618R3-FT is a high-end server based on the F418IL-R1K62BP 4U

rackmount chassis and the dual processor X10DRFF serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10DRFF serverboard and

the F418IL-R1K62BP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the FatTwin F618R3-FT into

a rack and check out the server conguration prior to powering up the system. If

your server was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

FatTwin F618R3-FT.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRFF serverboard, including the

locations and functions of connections, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconguring the

serverboard.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer F618R3-FT
Gewicht:	68040 g
Breedte:	448 mm
Diepte:	737 mm
Hoogte:	448 mm
Gewicht verpakking:	90710 g
Stroomvoorziening:	100 - 240V, 50-60Hz
LED-indicatoren:	Ja
Bluetooth:	Nee
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	8
Aantal Ethernet LAN (RJ-45)-poorten:	24
Netvoeding:	1620 W
Ingebouwde camera:	Nee
Temperatuur bij opslag:	-40 - 70 °C
Power LED:	Ja
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	16
Processor socket:	LGA 2011 (Socket R)
Maximum intern geheugen:	512 GB
Soort optische drive:	Nee
Ingebouwde grafische adapter:	Ja
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Netwerkfuncties:	Gigabit Ethernet LAN
Type behuizing:	Rack (4U), -
Overtollige fans ondersteuning:	Ja
ECC:	Ja
Chipset moederbord:	Intel® C612
PCI Express x16 slots:	8
Grafische adapter-familie:	Aspeed
Opslag schijf-interface:	SATA III
Seriële poort(en):	8
LAN controller:	Intel I210, Realtek RTL8211E
Soorten RAID:	0, 1
Compatibele processors:	Intel® Xeon®
Aantal storage drives ondersteund:	16
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geheugenslots:	8
Supported memory clock speeds:	1600,1866,2133 MHz
BIOS type:	AMI
Aantal SATA-aansluitingen:	16