Supermicro SuperServer E200-8B Handleiding

Supermicro Server SuperServer E200-8B

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer E200-8B (92 pagina's) in de categorie Server. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/92
SUPER ®
USER'S MANUAL
Revision 1.0
SuperServer®
E200-8B
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: January 12, 2015
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the server. Installation and
maintainance should be performed by experienced technicians only.
Please refer to the server specications page on our Web site for updates on
supported memory, processors and operating systems (www.supermicro.com).
Preface


Product specificaties

Merk: Supermicro
Categorie: Server
Model: SuperServer E200-8B
Kleur van het product: Zwart
Gewicht: 1750 g
Breedte: 195 mm
Diepte: 195 mm
Hoogte: 43 mm
LED-indicatoren: Ja
Aan/uitschakelaar: Ja
Processorfamilie: Intel
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 1
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Netvoeding: 60 W
Duurzaamheidscertificaten: RoHS
Meegeleverde software: SuperDoctor® 5\r\nWatch Dog
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Soort voeding: DC
Temperatuur bij opslag: -40 - 70 °C
Aantal ventilatoren: 1 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: 1
Processor socket: BGA 1170
Maximum intern geheugen: 8 GB
On-board graphics adapter model: Intel® HD Graphics
Luchtvochtigheid bij opslag: 10 - 95 procent
Geheugen form factor: 204-pin SO-DIMM
Ethernet interface type: Fast Ethernet, Gigabit Ethernet
Trusted Platform Module (TPM): Ja
Ondersteunde opslagstationinterfaces: Serial ATA II, Serial ATA III
Geheugen voltage: 1.35 V
LAN controller: Intel® I210-AT
Soorten RAID: 0, 1,10
Aantal SATA III connectors: 4
Non-ECC: Ja
Compatibele processors: Intel® Celeron®
Ondersteunde processor frequentie ( max): 2.42 GHz
Aantal ondersteunde processoren: 1
Aantal DIMM sloten: 2
Ondersteunend DIMM module capaciteiten: 2GB, 4GB
Aantal storage drives ondersteund: 1
Opslagschijf afmetingen ondersteund: 2.5 "
Ondersteunde geheugen types: DDR3-SDRAM
Bedrijfstemperatuur (T-T): 0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V): 10 - 85 procent
Trusted Platform Module (TPM) version: 1.2
Ventilator diameter: 40 mm
BIOS type: EEPROM
Grootte BIOS-geheugen: 64 Mbit
ACPI version: 5.0
Aantal SATA II connectors: 2
Maximale cache: 2 MB
BIOS-functies: Plug & Play, UEFI

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer E200-8B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Supermicro

Handleiding Server

Nieuwste handleidingen voor Server