Supermicro SuperServer 7048A-T Handleiding

Supermicro Server SuperServer 7048A-T

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 7048A-T (124 pagina's) in de categorie Server. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/124

S Wuper orkstation

7048A-T

SUPER

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: September 12, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the SuperWorkstation 7048A-T.

Installation and maintenance should be performed by experienced technicians only.

The SuperWorkstation 7048A-T is a high-end system based on the SC743TQ-1200B-

SQ tower/4U rackmount chassis and the X10DAi serverboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

system and describes the main features of the X10DAi serverboard and the

SC743TQ-1200B-SQ chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to setup the SuperWorkstation 7048A-T

into a rack and check out the server conguration prior to powering up the system. If

your system was ordered without processor and memory components, this chapter

will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperWorkstation 7048A-T.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 7048A-T
Kleur van het product:	Zwart
Gewicht:	32200 g
Breedte:	178 mm
Diepte:	648 mm
Hoogte:	452 mm
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Processorfamilie:	Intel® Xeon® E5 v3
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	5
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	1200 W
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	6
Processor socket:	LGA 2011 (Socket R)
Systeembus:	9.6 GT/s
Maximum intern geheugen:	1000 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (4U)
ECC:	Ja
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® C612
PCI Express x16 slots:	3
Koperen ethernetbekabelingstechnologie:	1000BASE-T, 100BASE-T, 10BASE-T
Ondersteunde opslagstationinterfaces:	SATA II
Seriële poort(en):	2
PCI Express x8 slots:	2
PCI Express x4 slots:	1
Geheugen voltage:	1.2 V
LAN controller:	Intel I210
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	10
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	32 GB
Aantal DIMM sloten:	16
Aantal storage drives ondersteund:	8
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Code geharmoniseerd systeem (HS):	84714100
BIOS type:	AMI
Grootte BIOS-geheugen:	128 Mbit
ACPI version:	4.0
IPMI LAN (RJ-45) port:	Ja
BIOS-functies:	UEFI