Supermicro SuperServer 6019P-WTR Handleiding

Supermicro Server SuperServer 6019P-WTR

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 6019P-WTR (12 pagina's) in de categorie Server. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Information for Lot 9 of ErP (Ecodesign)

This addendum addresses European Union (EU) Ecodesign requirements for servers and storage

products. All data and ratings within this addendum are in reference only to the Supermicro product(s) in

the manual. The below information conforms requirements laid down in Annex II of the Commission to

Regulation 2019/424.

3(1)(a): See section 1.1 of the manual for the product type.

3(1)(b): See the title page and preface of the system manual for the trademark and

manufacturer’s address.

3(1)(c): See the title page of the system manual for product model number(s).

3(1)(d): See the serial number on the physical system to determine the year of manufacture.

3(1)(e-j ): PSU Efficiency and Power Factor Value (Table) (From 80 Plus report)

PSU Model #: PWS-706P- 1R

Watts: 750W

PSU Efficiency

Power Factor

% of Rated Load

10%

20%

50%

100%

50%

Single Output (AC-DC)

88.83%

94.05%

94.64%

91.77%

0.99

System (EUT) Efficiency in Power (Table) Idle State

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle

Power Allowance (W)

High-End Performance

Configuration

162.5

334.48

Typical Configuration

N/A

Low-End Performance

Configuration

138.5

246.87

System (EUT) Efficiency in Power (Table) Active State

Representative

Configurations

Active State

Efficiency Score

(Effserver)

Minimum Active State

Efficiency for 2-Socket

Server

High-End Performance

Configuration

29.7

9.5

Typical Configuration

N/A

Low-End Performance

Configuration

24.4

3(1)(k): The operating condition class is A2.

Dry Bulb Temp °C

Humidity Range

(N -Condensing) on

Operating

Condition

Class

Allowable

Range

Recommended

Range

Allowable Range

Dew Point (DP)

Relative Humidity

(RH)

Recommend

Range

Max

Dew

Point

(°C)

Max

Rate of

Change

(°C/hr.)

15 32-

18 27-

– 12 °C DP and 8 %

RH to 17 °C DP and

80 % RH

-9°C DP to

15°C and

60% RH

5/20

10 35-

18 27-

– 12 °C DP and 8 %

RH to 21 °C DP and

80 % RH

Same as A1

5/20

5- 40

18 27-

– 12 °C DP and 8 %

RH to 24 °C DP and

85 % RH

Same as A1

5/20

5- 45

18 27-

– 12 °C DP and 8 %

RH to 24 °C DP and

90 % RH

Same as A1

5/20

3(1)(l): The idle state power at the higher boundary temperature of the operating conditions

class: 191.75W.

3(1)(m): The active state efficiency and performance: 29.7.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)(o): List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family SYS-6019P-WTR. :

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of Neodymium in the HDD is 0.0 if manufactured by Western

Digital, and is between 5-25 grams if manufactured by Seagate.

3(3)(b): Please see the disassembly instructions on the next page.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 6019P-WTR
Kleur van het product:	Zwart
Breedte:	437 mm
Diepte:	597 mm
Hoogte:	43 mm
Gewicht verpakking:	20900 g
LED-indicatoren:	HDD, Network, Power, Status
Aan/uitschakelaar:	Ja
Processorfamilie:	Intel
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	750 W
Duurzaamheidscertificaten:	RoHS
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	1000 Mbit/s
Temperatuur bij opslag:	-40 - 60 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	4
Processor socket:	LGA 3647 (Socket P)
Systeembus:	10.4 GT/s
PCI Express slots versie:	3.0
Maximum intern geheugen:	1500 GB
On-board graphics adapter model:	Aspeed AST2500
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (1U)
Redundante voeding:	Ja
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® C621
PCI Express x16 slots:	3
Ondersteunde opslagstationinterfaces:	SATA III
PCI Express x8 slots:	1
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	4
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	768 GB
Aantal DIMM sloten:	12
Ondersteunende RDIMM klok snelheden:	2666,2133,2400 MHz
Aantal storage drives ondersteund:	4
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	2
Code geharmoniseerd systeem (HS):	84714100
Ventilator diameter:	40 mm
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
Backplanes ondersteund:	Ja
IPMI LAN (RJ-45) port:	Ja