Supermicro SuperServer 5019S-MR-G1585L Handleiding

Supermicro Server SuperServer 5019S-MR-G1585L

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 5019S-MR-G1585L (13 pagina's) in de categorie Server. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13

Information for Lot 9 of ErP (Ecodesign)

This addendum addresses European Union (EU) Ecodesign requirements for servers and storage

products. All data and ratings within this addendum are in reference only to the Supermicro product(s) in

th toe manual. The below information conforms requirements laid down in Annex II of the Commission

Regulation 2019/424.

3(1)(a): See Section 1.1 of the system manual for the product type.

3(1)(b): See the title page and preface of the system manual for the trademark and

manufacturer’s address.

3(1)(c): See the title page of the system manual for product model number(s).

3(1)(d): See the serial number the physical system to determine the year of manufacture. on

3(1)(e-j): PSU Efficiency and Power Factor Value able) (From 80 Plus report) (T

PSU Model #: PWS- -407

Watts: 400W

PSU Efficiency

Power Fact or

% of Rated Load

10 %

20 %

50 %

100 %

50 %

Single Output (AC-DC)

85.64%

92.05%

94.43%

93.17%

0.98

System (EUT) Efficiency in Power (Table) Idle State

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power

Allowance (W)

High-End Performance

Configuration

54.3

181.86

Typical Configuration

N/A

Low-End Performance

Configuration

45.6

179.87

System (EUT) Efficiency in Power (Table) Active State

Representative

Configurations

Active State

Efficiency Score

(Effserver)

Minimum Active State

Efficiency for 2-Socket

Server

High-End Performance

Configuration

11.8

Typical Configuration

N/A

Low-End Performance

Configuration

12.1

3(1)(k): The operating condition class . is A2

Dry bulb temp C°

Humidity range, non-condensing

Operating

condition

class

Allowable

range

Recom

mended

range

Allowable range

Recommended range

Max dew

point (°C)

Maximum

rate of

change

(°

C/hr)

15 32-

18 27-

–

12 C Dew Point (DP) and°

8 % relative humidity (RH) to

17 80 C DP and ° % RH

–

9 C °DP to

15 C and °DP

60 % RH

5/20

10 35-

18 27-

–

12 C and 8 % °DP RH to

21 80 C and °DP % RH

Same as A1

5/20

5-40

18 27-

–

12 C and 8 % °DP RH to

24 85 C and °DP % RH

Same as A1

5/20

5-45

18 27-

–

12 C and 8 % °DP RH to

24 90 C and °DP % RH

Same as A1

5/20

3(1)(l): The idle state power at the higher boundary temperature of the operating conditions

class is 64.07W.

3(1)(m): The active state efficiency and performance a minimum of 11.8. is

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)(o): List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family N/A. :

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of neodymium in the HDD is 0.0 if manufactured by Western

Digital, and is between 5-25 grams if manufactured by Seagate.

3(3)(b): Please see the disassembly instructions on the next page.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 5019S-MR-G1585L
Kleur van het product:	Zwart
Gewicht:	9100 g
Breedte:	437 mm
Diepte:	503 mm
Hoogte:	43 mm
Gewicht verpakking:	15000 g
LED-indicatoren:	HDD, LAN, Power
Processorfamilie:	Intel® Xeon®
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	400 W
Duurzaamheidscertificaten:	RoHS
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	4
Processor socket:	BGA1440
PCI Express slots versie:	3.0
Maximum intern geheugen:	64 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (1U)
Redundante voeding:	Ja
ECC:	Ja
Geheugen form factor:	288-pin DIMM
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® C236
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
Ondersteunde opslagstationinterfaces:	SATA III
Seriële poort(en):	2
PCI Express x8 slots:	1
Geheugen voltage:	1.2 V
LAN controller:	Intel® I350
Soorten RAID:	0, 1,5, 10
Geheugenbus:	72 Bit
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	1
Intel® Xeon series:	E3-1585
Maximum UDIMM geheugen:	64 GB
Aantal DIMM sloten:	4
Ondersteunende RDIMM klok snelheden:	1600,1866,2133 MHz
Aantal storage drives ondersteund:	4
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Ventilator diameter:	40 mm
BIOS type:	EEPROM
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	2.0
DC output stroom (+ 12 V):	33 A
IPMI LAN (RJ-45) port:	Ja
BIOS-functies:	PCI 2.3, SMBIOS 2.3