Supermicro SuperServer 5018D-MHR7N4P Handleiding

Supermicro Server SuperServer 5018D-MHR7N4P

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 5018D-MHR7N4P (126 pagina's) in de categorie Server. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/126

S SUPER ERVER®

5018D-MHR7N4P

USER’S MANUAL

1.0

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0

Release Date: July 18, 2017

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It pro-

vides information for the installation and use of the SuperServer 5018D-MHR7N4P.

Installation and maintenance should be performed by experienced technicians only.

The SuperServer 5018D-MHR7N4P is a high-end server based on the SC-

813MFTQC-R407CB rackmountable chassis and the X10SDV-7TP4F SoC moth-

erboard.

Manual Organization

Chapter 1: Introduction

The rst chapter provides a checklist of the main components included with the

server system and describes the main features of the X10SDV-7TP4F motherboard

and the SC813MFTQC-R407CB chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer 5018D-

MHR7N4P into a rack and check out the server conguration prior to powering up the

system. If your server was ordered without processor and memory components, this

chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: Standardized Warning Statements

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 5018D-MHR7N4P.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 5018D-MHR7N4P
Kleur van het product:	Zwart
Gewicht:	9070 g
Breedte:	437 mm
Diepte:	503 mm
Hoogte:	43 mm
Gewicht verpakking:	14970 g
LED-indicatoren:	Ja
Stroom:	3 - 6 A
Aan/uitschakelaar:	Ja
Processorfamilie:	Intel® Xeon®
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	400 W
Duurzaamheidscertificaten:	RoHS
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,10000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	1
Processor socket:	BGA 1667
PCI Express slots versie:	3.0
ECC ondersteund door processor:	Ja
Maximum intern geheugen:	128 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (1U)
80 PLUS certificatie:	80 PLUS Platinum
Redundante voeding:	Ja
ECC:	Ja
Ethernet interface type:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel SoC
Trusted Platform Module (TPM):	Ja
Processorserie:	Intel Xeon D-1500
Type koeling:	Actief
Aantal 3.5" bays:	4
Ondersteunde opslagstationinterfaces:	Serial ATA, Serial ATA II, Serial ATA III, Serial Attached SCSI (SAS), Serial Attached SCSI (SAS)-2
Aantal ondersteunde redundante voedingen:	1
Geheugen voltage:	1.2 V
Soorten RAID:	0, 1,5, 10
PCI Express x8 (Gen 3.x) slots:	1
Aantal hoofdvoedingen:	1
Non-ECC:	Ja
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	1
Intel® Xeon series:	D-1500
Maximum UDIMM geheugen:	128 GB
Aantal DIMM sloten:	4
Ondersteunende RDIMM klok snelheden:	1600,1866,2133 MHz
Ondersteunend DIMM module capaciteiten:	4GB, 8GB, 16GB, 32GB
Aantal storage drives ondersteund:	4
Opslagschijf afmetingen ondersteund:	2.5, 3.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Code geharmoniseerd systeem (HS):	84714100
Trusted Platform Module (TPM) version:	2.0
Aantal moduleslots SPF+:	2
Ondersteunde types opslag-drives:	HDD & SSD
BIOS type:	AMI
Grootte BIOS-geheugen:	128 Mbit
ACPI version:	5.0
Systeem Management BIOS (SMBIOS) versie:	2.8
Aantal M.2 (M) slots:	4
DC output stroom (+ 12 V):	33 A
Intelligent Platform Management Interface (IPMI) support:	Ja
IPMI LAN (RJ-45) port:	Ja
Afmetingen voeding (BxDxH):	54.5 x 220 x 40 mm
Maximale cache:	12 MB
BIOS-functies:	PCI 3.0, SMBIOS 2.8, UEFI
UEFI-versie:	2.4
Micro low profile PCI-Express-slots:	1