Supermicro SuperServer 2028TP-HC1FR Handleiding

Supermicro Server SuperServer 2028TP-HC1FR

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 2028TP-HC1FR (140 pagina's) in de categorie Server. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/140
®
SUPER
USER'S MANUAL
Revision 1.0
SUPERSERVER®
2028TP-HC1R
2028TP-HC1TR
2028TP-HC1FR
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: September 08, 2014
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2014 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
2028TP-HC1R/HC1TR/HC1FR. Installation and maintainance should be performed
by experienced technicians only.
The SuperServer 2028TP-HC1R/HC1TR/HC1FR is a high-end server based
on the SC217HQ+-R2K02B 2U rackmount chassis and the dual processor
X10DRT-P/PT/PIBF serverboard. Both models have an IPMI LAN port and four
serverboard nodes with six hot-swap Hard Disk Drives (HDD) each per node.
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with
the server system and describes the main features of the X10DRT-P/PT/PIBF
serverboard and the SC217HQ+-R2K02B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
2028TP-HC1R/HC1TR/HC1FR into a rack and check out the server conguration
prior to powering up the system. If your server was ordered without processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 2028TP-HC1R/HC1TR/HC1FR.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X10DRT-P/PT/PIBF serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconguring the serverboard.


Product specificaties

Merk: Supermicro
Categorie: Server
Model: SuperServer 2028TP-HC1FR
Kleur van het product: Zwart
Gewicht: 38600 g
Breedte: 438 mm
Diepte: 724 mm
Hoogte: 88 mm
LED-indicatoren: Ja
Aan/uitschakelaar: Ja
Processorfamilie: Intel® Xeon® E5 v3
Ethernet LAN: Ja
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 3
Netvoeding: 2000 W
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000 Mbit/s
Temperatuur bij opslag: -40 - 70 °C
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: 2
Processor socket: LGA 2011 (Socket R)
Systeembus: 9.6 GT/s
Maximum intern geheugen: 1000 GB
On-board graphics adapter model: Aspeed AST2400
Luchtvochtigheid bij opslag: 5 - 95 procent
Type behuizing: Rack (2U)
ECC: Ja
Ethernet interface type: Fast Ethernet, Gigabit Ethernet
Chipset moederbord: Intel® C612
PCI Express x16 slots: 1
Koperen ethernetbekabelingstechnologie: 1000BASE-T, 100BASE-TX, 10BASE-T
Seriële poort(en): 2
Geheugen voltage: 1.2 V
LAN controller: Intel® I350-AM2
Soorten RAID: 0, 1,5, 6,10, 50
Compatibele processors: Intel® Xeon®
Aantal ondersteunde processoren: 2
Intel® Xeon series: E5-2600
Maximum UDIMM geheugen: 32 GB
Aantal DIMM sloten: 16
Aantal storage drives ondersteund: 6
Opslagschijf afmetingen ondersteund: 2.5 "
Ondersteunde geheugen types: DDR4-SDRAM
Hot-swap HDD bays: Ja
Bedrijfstemperatuur (T-T): -10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
BIOS type: AMI
Grootte BIOS-geheugen: 128 Mbit
ACPI version: 2.0
IPMI LAN (RJ-45) port: Ja
Aantal SAS-poorten: 6
BIOS-functies: APM 1.2, PCI 2.2, SMBIOS 2.3, UEFI

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer 2028TP-HC1FR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Supermicro

Handleiding Server

Nieuwste handleidingen voor Server