Supermicro SuperServer 2028TP-DECFR Handleiding

Supermicro Server SuperServer 2028TP-DECFR

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 2028TP-DECFR (146 pagina's) in de categorie Server. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/146

SUPERSERVER®

2028TP-DECR

2028TP-DECFR

2028TP-DECTR

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0a

Release Date: September 14, 2015

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer

2028TP-DECR/DECTR/DECFR. Installation and maintainance should be performed

by experienced technicians only.

The SuperServer 2028TP-DECR/DECTR/DECFR is a high-end server based on

the SC217HD+-R1K28B 2U rackmount chassis and the X10DRT-P/PIBF/PT dual

processor serverboards with two BPN-ADP-E1C-L-O-P controller cards for SAS/

SATA drives. All models have an IPMI LAN port and two serverboard nodes, each

with twelve hot-swap Hard Disk Drives (HDD) each per node.

Each of the various models of the SuperServer 2028TP-DECR/DECTR/DECFR

servers and their associated serverboards for each of their unique options are

listed in the table below:

SuperServer 2028TP-DECR/DECTR/DECFR Model Variations

Server

Model

X9DRT

Serverboard Inﬁ niBand 10G Ethernet

2028TP-DECR X10DRT-P

2028TP-DECFR X10DRT-PIBF YES

2028TP-DECTR X10DRT-PT YES

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with

the server system and describes the main features of the X10DRT-P/PIBF/PT

serverboard and the SC217HD+-R1K28B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the SuperServer

2028TP-DECR/DECTR/DECFR into a rack and check out the server conﬁ guration

prior to powering up the system. If your server was ordered without processor and

memory components, this chapter will refer you to the appropriate sections of the

manual for their installation.

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and

information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

SuperServer 2028TP-DECR/DECTR/DECFR.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the X10DRT-P/PIBF/PT serverboard,

including the locations and functions of connections, headers and jumpers. Refer

to this chapter when adding or removing processors or main memory and when

reconﬁ guring the serverboard.

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC217HD+-R1K28B server

chassis. You should follow the procedures given in this chapter when installing,

removing or reconﬁ guring SATA or peripheral drives and when replacing system

power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: System Speciﬁ cations

Table of Contents

Chapter 1 Introduction

1-1 Overview ......................................................................................................... 1-1

1-2 Serverboard Features ..................................................................................... 1-2

Processors ...................................................................................................... 1-2

Memory ........................................................................................................... 1-2

SAS/SATA/NVMe ............................................................................................ 1-2

PCI Expansion Slots ....................................................................................... 1-2

Onboard Controllers/Ports .............................................................................. 1-3

Graphics Controller ......................................................................................... 1-3

Inﬁ niBand ........................................................................................................ 1-3

Other Features ................................................................................................ 1-3

1-3 Server Chassis Features ................................................................................ 1-3

System Power ................................................................................................. 1-3

SAS/SATA Subsystem ..................................................................................... 1-4

Front Control Panel ......................................................................................... 1-4

I/O Ports .......................................................................................................... 1-4

Cooling System ............................................................................................... 1-4

Air Shrouds ..................................................................................................... 1-4

Mounting Rails ................................................................................................ 1-4

1-4 Advanced Power Management ....................................................................... 1-5

Intel® Intelligent Power Node Manager (IPNM) ............................................. 1-5

Manageability Engine (ME) ............................................................................. 1-5

1-4 Contacting Supermicro .................................................................................... 1-7

1-5 2U Twin: System Notes ................................................................................... 1-8

Nodes .............................................................................................................. 1-8

System Power ................................................................................................. 1-8

SAS Backplane/Drives .................................................................................... 1-8

Chapter 2 Server Installation

2-1 Overview ......................................................................................................... 2-1

2-2 Unpacking the System .................................................................................... 2-1

2-3 Preparing for Setup ......................................................................................... 2-1

Choosing a Setup Location ............................................................................. 2-2

2-4 Warnings and Precautions .............................................................................. 2-2

Rack Precautions ............................................................................................ 2-2

Server Precautions .......................................................................................... 2-2

Rack Mounting Considerations ....................................................................... 2-3

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

viii

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard ............................................................................... 5-1

Precautions ..................................................................................................... 5-1

5-2 Connecting Cables .......................................................................................... 5-2

Connecting Data Cables ................................................................................. 5-2

5-3 Rear I/O Ports ................................................................................................. 5-3

5-4 Processor and Heatsink Installation................................................................ 5-4

Installing a Passive CPU Heatsink ................................................................. 5-7

Removing the Heatsink ................................................................................... 5-8

5-5 Installing Memory ............................................................................................ 5-9

Memory Support .............................................................................................. 5-9

5-6 Adding PCI Expansion Cards ........................................................................5-11

5-7 Serverboard Details ...................................................................................... 5-12

X10DRT-P/PIBF/PT Quick Reference ........................................................... 5-13

5-8 Connector Deﬁ nitions .................................................................................... 5-14

5-9 Jumper Settings ............................................................................................ 5-17

Explanation of Jumpers ................................................................................ 5-17

5-10 Onboard Indicators ........................................................................................ 5-19

5-11 PCI-Express and SATA Connections ............................................................ 5-21

5-12 Installing Software ......................................................................................... 5-22

SuperDoctor 5 ............................................................................................... 5-23

5-13 Onboard Battery ............................................................................................ 5-25

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices .................................................................................. 6-1

Precautions ..................................................................................................... 6-1

Unpacking ....................................................................................................... 6-1

6-2 Removing the Power Cord .............................................................................. 6-2

6-3 Control Panel .................................................................................................. 6-2

6-4 Chassis Cover ................................................................................................. 6-3

6-5 Air Shrouds ..................................................................................................... 6-4

6-6 Checking the Airﬂ ow ....................................................................................... 6-5

6-7 System Fans ................................................................................................... 6-5

6-8 Removing and Installing the Backplane .......................................................... 6-7

Removing the Backplane ................................................................................ 6-7

Installing the Backplane .................................................................................. 6-9

6-9 Installing the Serverboard ............................................................................. 6-10

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

Compatible Motherboards ............................................................................. 6-10

Permanent and Optional Standoffs ............................................................... 6-10

Installing an Daughter Card .......................................................................... 6-12

6-10 Adding an Expansion Card ........................................................................... 6-13

6-11 Drive Bay Installation/Removal ..................................................................... 6-14

Accessing the Drive Bays ............................................................................. 6-14

6-12 Power Supply ................................................................................................ 6-17

Power Supply Replacement .......................................................................... 6-17

Chapter 7 BIOS

7-1 Introduction ...................................................................................................... 7-1

Starting BIOS Setup Utility .............................................................................. 7-1

How To Change the Conﬁ guration Data ......................................................... 7-1

How to Start the Setup Utility ......................................................................... 7-2

7-2 Main Setup ...................................................................................................... 7-2

7-3 Advanced Setup Conﬁ gurations...................................................................... 7-4

7-4 Event Logs .................................................................................................... 7-33

7-5 IPMI ............................................................................................................... 7-35

7-6 Security Settings ........................................................................................... 7-37

7-7 Boot Settings ................................................................................................. 7-38

Use this feature to conﬁ gure Boot Settings: ............................................................ 7-38

7-8 Save & Exit ................................................................................................... 7-40

Appendix A BIOS Error Beep Codes

Appendix B System Speciﬁ cations

Table of Contents

Notes

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

1-4

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

SAS/SATA Subsystem

The 2028TP-DECR/DECTR/DECFR supports up to twenty-four (24) 2.5" hot-swap

SAS/SATA drives in trays (12 for each node). These drives are hot-swappable units

and are connected to an adapter card that provides power and control.

Note: The operating system you use must have RAID support to enable the hot-

swap capability of the drives.

Front Control Panel

SC217 models include four front panels on the handles of the chassis which control

each of the systems. Each control panel on the 2028TP-DECR/DECTR/DECFR

server provides you with system monitoring and control for one server node. LEDs

indicate system power, HDD activity, network activity, system overheat and power

supply failure. A main power ON/OFF button is also included.

I/O Ports

The SC217 chassis designed to be used in a 2U rackmount conﬁ guration. The

SC217 chassis provides a low-proﬁ le add-on card slot, a VGA port, two USB 3.0 ports

(additionally one internal USB header is included on the serverboard), two gigabit

(2028TP-DECR/2028TP-DECFR servers) or 10-gigabit (2028TP-DECTR server)

Ethernet ports, an IPMI Ethernet port and an Inﬁ niBand® port (2028TP-DECFR

server only) per node.

Cooling System

The SC217 chassis accepts four system fans, which are powered from the

backplane.

Note: The fans in this system are NOT redundant, hot-plug.

Air Shrouds

The SC217 chassis includes two Mylar air shrouds that direct the airﬂ ow where

cooling is needed on each serverboard. Always use the air shroud included with

your chassis on each serverboard.

Mounting Rails

The SC217 includes a set of quick-release rails, and can be placed in a rack for

secure storage and use. To setup your rack, follow the step-by-step instructions

included in this manual.

1-6

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

Figure 1-1. PCH C612 Chipset:

System Block Diagram

Note: This is a general block diagram. Please see Chapter 5 for details.

SPI

LAN3

RGRMII

Debug Card

FRONT PANEL

SYSTEM POWER

CTRL

FAN SPEED

PCI-E X1 G2

USB 2.0

PCH C612

6.0 Gb/S

LPC

SATA

RTL8211E-VB-CG

RJ45

Temp Sensor

EMC1402-1 *2 at diff SMBUS

TPM HEADER

USB 3.0

USB

AST2400

BMC

RMII/NCSI

VGA CONN

BMC Boot Flash

DDR3

5 PHASE

145W

1333/2133

DDR4

VR12.5

#2-1

DDR4

#1-4

#1-3

#1-2

#1-1

QPI

9.6G

CX3 IB

CPU1

DMI2

PCI-E X8 G3

#1-5

#1-6

PCI-E X8 G3

DMI2

CPU2

DDR-4 DDR-4

QPI

9.6G

5 PHASE

145W

VR12.5

i350/

X540

LAN

PCI-E X8

SLOT1

SLOT2

PCI-E X8 G3

PCI-E X16 G3

#1-7

#1-8

#2-2

#2-3

#2-4

#2-5

#2-6

#2-7

#2-8

6789

SXB2

COM1

Connector

#2 #2

DMI2

#3 #3

SXB1

SPI

BIOS

SPI

2-2

SUPERSERVER 2028TP-DECR/DECTR/DECFR User's Manual

Choosing a Setup Location

• Leave enough clearance in front of the rack to enable you to open the front door

completely (~25 inches) and approximately 30 inches of clearance in the back

of the rack to allow for suf cient air ow and ease in servicing.

• This product is for installation only in a Restricted Access Location (dedicated

equipment rooms, service closets and the like).

• This product is not suitable for use with visual display work place devices

acccording to §2 of the the German Ordinance for Work with Visual Display Units.

2-4 Warnings and Precautions

Rack Precautions

• Ensure that the leveling jacks on the bottom of the rack are fully extended to

the  oor with the full weight of the rack resting on them.

• In single rack installation, stabilizers should be attached to the rack. In multiple

rack installations, the racks should be coupled together.

• Always make sure the rack is stable before extending a component from the

rack.

• You should extend only one component at a time - extending two or more

simultaneously may cause the rack to become unstable.

Server Precautions

• Review the electrical and general safety precautions in Chapter 4.

• Determine the placement of each component in the rack before you install the

rails.

• Install the heaviest server components on the bottom of the rack  rst, and then

work up.

• Use a regulating uninterruptible power supply (UPS) to protect the server from

power surges, voltage spikes and to keep your system operating in case of a

power failure.

• Allow any hot plug drives and power supply modules to cool before touching

them.

• Always keep the rack's front door and all panels and components on the servers

closed when not servicing to maintain proper cooling.

Chapter 2: Server Installation

2-9

Figure 2-6. Installing into a Rack

Ball-Bearing

Shuttle

Standard Chassis Installation

Installing the Chassis into a Rack (Figure 2-6)

1. Con rm that the inner rails are properly installed on the chassis.

2. Con rm that the outer rails are correctly installed on the rack.

3. Pull the middle rail out from the front of the outer rail and make sure that the

ball-bearing shuttle is at the front locking position of the middle rail.

4. Align the chassis inner rails with the front of the middle rails.

5. Slide the inner rails on the chassis into the middle rails, keeping the pressure

even on both sides, until the locking tab of the inner rail clicks into the front of

the middle rail, locking the chassis into the fully extended position.

6. Depress the locking tabs of both sides at the same time and push the chassis

all the way into the rear of the rack.

7. If necessary for security purposes, use screws to secure the chassis handles

to the front of the rack.

Note: The  gure below is for illustration purposes only. Always install servers to

the bottom of the rack  rst.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 2028TP-DECFR
Kleur van het product:	Zwart
Gewicht:	29900 g
Breedte:	438 mm
Diepte:	730 mm
Hoogte:	88 mm
Gewicht verpakking:	38600 g
LED-indicatoren:	HDD, Network, Power
Stroom:	6 - 12 A
Aan/uitschakelaar:	Ja
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	1280 W
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 2011 (Socket R)
Systeembus:	9.6 GT/s
PCI Express slots versie:	3.0
Maximum intern geheugen:	2000 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (2U)
80 PLUS certificatie:	80 PLUS Platinum
Redundante voeding:	Ja
ECC:	Ja
Geheugen form factor:	288-pin DIMM
Ethernet interface type:	Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® C612
PCI Express x16 slots:	1
Koperen ethernetbekabelingstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
Ondersteunde opslagstationinterfaces:	Serial Attached SCSI (SAS)-3
Seriële poort(en):	2
PCI Express x8 slots:	1
Geheugen voltage:	1.2 V
LAN controller:	Intel I350-AM2, Realtek RTL8201N
Geheugenbus:	72 Bit
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	2
Intel® Xeon series:	E5-2600
Maximum UDIMM geheugen:	512 GB
Aantal DIMM sloten:	16
Ondersteunende RDIMM klok snelheden:	1600,1866,2133,2400 MHz
Ondersteunend DIMM module capaciteiten:	4GB, 8GB, 16GB, 32GB, 64GB, 128MB
Aantal storage drives ondersteund:	12
Opslagcontroller:	LSI SAS3008
Opslagschijf afmetingen ondersteund:	2.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Type systeembus:	QuickPath Interconnect (QPI)
Ventilator diameter:	80 mm
Ondersteunde types opslag-drives:	HDD
BIOS type:	AMI
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	1.0 / 2.0
Systeem Management BIOS (SMBIOS) versie:	2.3
DC output stroom (+ 12 V):	106.7 A
Intelligent Platform Management Interface (IPMI) support:	Ja
Geïntegreerde BMC met IPMI:	Ja
IPMI LAN (RJ-45) port:	Ja
DC uitgangsstroom (+ 5 V):	4 A
Maximale cache:	55 MB
Aantal SAS-poorten:	12
BIOS-functies:	APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI