Supermicro SuperServer 1028TR-T Handleiding

Supermicro Server SuperServer 1028TR-T

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 1028TR-T (144 pagina's) in de categorie Server. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/144
SUPERSERVER®
1028TR-T
1028TR-TF
USER’S MANUAL
Revision 1.0
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: March 03, 2015
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 1028TR-T/TF.
Installation and maintainance should be performed by experienced technicians only.
The SuperServer 1028TR-T/TF is a high-end server based on the SC809TS-1K03BP
1U rackmount chassis and the dual processor X10DRT-L/LIBF serverboard. All
models have an IPMI LAN port and two serverboard nodes with four hot-swap 2.5"
SATA3 Hard Disk Drives (HDD) each per node.
Each of the various models of the SuperServer 1028TR-T/TF servers and their
associated serverboards for each of their unique options are listed in the table below:
SUPERSERVER 1028TR-T/TF Model Variations
Server
Model
X10DRT
Serverboard
In niBand
FDR/QDR Connector
1028TR-T X10DRT-L NO
1028TR-TF X10DRT-LIBF YES
Manual Organization
Chapter 1: Introduction
The rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X10DRT-L/LIBF serverboard
and the SC809TS-1K03BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 1028TR-T/TF
into a rack and check out the server con guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.


Product specificaties

Merk: Supermicro
Categorie: Server
Model: SuperServer 1028TR-T
Kleur van het product: Zwart, zilver
Breedte: 437 mm
Diepte: 705 mm
Hoogte: 43 mm
Aan/uitschakelaar: Ja
Processorfamilie: Intel
Ethernet LAN: Ja
Aantal USB 2.0-poorten: 2
VGA (D-Sub)poort(en): 1
Aantal Ethernet LAN (RJ-45)-poorten: 2
Netvoeding: 1000 W
Ethernet LAN, data-overdrachtsnelheden: 10,100,1000,10000 Mbit/s
Temperatuur bij opslag: -40 - 70 °C
Aantal ventilatoren: 3 ventilator(en)
Processor socket: LGA 2011 (Socket R)
Systeembus: 9.6 GT/s
PCI Express slots versie: 3.0
Maximum intern geheugen: 512 GB
On-board graphics adapter model: Aspeed AST2400
Luchtvochtigheid bij opslag: 5 - 95 procent
Type behuizing: Rack (1U)
ECC: Ja
Geheugen form factor: 288-pin DIMM
Ethernet interface type: 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Chipset moederbord: Intel® C612
PCI Express x16 slots: 1
Koperen ethernetbekabelingstechnologie: 1000BASE-T, 100BASE-TX, 10BASE-T, 10GBASE-T
Ondersteunde opslagstationinterfaces: SATA III
Seriële poort(en): 1
Geheugen voltage: 1.2 V
LAN controller: Intel® I350
Soorten RAID: 0, 1,5, 10
Geheugenbus: 72 Bit
Aantal SATA III connectors: 10
Compatibele processors: Intel® Xeon®
Aantal ondersteunde processoren: 2
Intel® Xeon series: E5-2600
Maximum UDIMM geheugen: 256 GB
Aantal DIMM sloten: 8
Ondersteunende RDIMM klok snelheden: 1600,1866,2133 MHz
Ondersteunend DIMM module capaciteiten: 16GB, 32GB, 4GB, 8GB
Aantal storage drives ondersteund: 4
Opslagschijf afmetingen ondersteund: 2.5 "
Ondersteunde geheugen types: DDR4-SDRAM
Hot-swap HDD bays: Ja
AC-ingangsspanning: 100 - 240 V
AC-ingangsfrequentie: 50 - 60 Hz
Bedrijfstemperatuur (T-T): 10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V): 8 - 90 procent
Type systeembus: QuickPath Interconnect (QPI)
BIOS type: EEPROM
Grootte BIOS-geheugen: 128 Mbit
ACPI version: 4.0
DC output stroom (+ 12 V): 75 A
IPMI LAN (RJ-45) port: Ja
DC uitgangsstroom (+ 5 V): 4 A
Maximale cache: 45 MB
BIOS-functies: Plug & Play, UEFI

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro SuperServer 1028TR-T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Server Supermicro

Handleiding Server

Nieuwste handleidingen voor Server