Supermicro SBA-7142G-T4 Handleiding

Supermicro Server SBA-7142G-T4

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SBA-7142G-T4 (80 pagina's) in de categorie Server. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/80

SBA-7142G-T4

Blade Module

User’s Manual

Revison 1.0d

SBA-7142G-T4 Blade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS PRODUCT MAY

EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE BIRTH DEFECTS AND OTHER REPRODUCTIVE HARM.

Manual Revison 1.0d

Release Date: April 3, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of the Supermicro SuperBlade

® system’s SBA-7142G-T4 blade

module. Installation and maintenance should be performed by experienced

professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

SBA-7142G-T4 blade module and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing SBA-7142G-T4 blade

module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBA-7142G-T4 blade module into the

SuperBlade chassis. Other sections cover the installation and placement of memory

modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about SBA-7142G-T4 blade

module. Included here are descriptions and information for mainboard components,

connectors, LEDs and other features of the blade module.

Chapter 5: BIOS

BIOS setup is covered in this chapter for SBA-7142G-T4 blade module.

Appendix A: BIOS POST Codes

BIOS POST Codes for SBA-7142G-T4 blade module are explained in this appendix.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SBA-7142G-T4
Ingebouwd display:	Nee
Gewicht:	7710 g
Breedte:	288 mm
Diepte:	520.7 mm
Hoogte:	42.4 mm
Frequentie van processor:	- GHz
Processorfamilie:	AMD Opteron
Ethernet LAN:	Ja
Geïntegreerde geheugenkaartlezer:	Nee
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	FCC\r\nEN55022\r\nEN55024\r\nEN61000-3-2\r\nEN61000-3-3\r\nCE\r\nUL60950-1
Intern geheugen:	- GB
Intern geheugentype:	DDR3-SDRAM
Bekabelingstechnologie:	10/100/1000Base-T(X)
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	Socket G34
Maximum intern geheugen:	512 GB
Totale opslagcapaciteit:	- GB
Soort optische drive:	Nee
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Lemmet
ECC:	Ja
Kloksnelheid geheugen:	- MHz
Geheugenslots:	16
Aantal geïnstalleerde processoren:	4
HDD interface:	SATA
RAID support:	Ja
HDD omvang:	2.5 "
Maximale opslagcapaciteit:	- TB
Soorten RAID:	0, 1,10
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal KVM schakelaar ports:	1
Geiïntegreerde SAS ports:	3