Sun Joe LJ602E Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe LJ602E (40 pagina's) in de categorie Splitter. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/40
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions.
1
SAVE THESE INSTRUCTIONS
EN
A Division of Snow Joe
® , LLC Model LJ602E Form No. SJ-LJ602E-880E-MR3
R
OPERATOR’S MANUAL
ELECTRIC LOG SPLITTER
15-AMP | HYDRAULIC | 5-TON
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety Warnings!
When using the log splitter, basic safety precautions should
always be followed to reduce the risk of re, electric shock,
and personal injury, including the following:
mWARNING! The use of any other accessory or
attachment might increase the risk of injury.
TRAINING
Before using the log splitter, take the time to familiarize
yourself with the controls, especially how to stop the log
splitter in an emergency. Only individuals who have read these
instructions and have a thorough understanding of these
instructions shall operate the log splitter. Never allow children
to operate the log splitter.
Retain this manual for future reference and reread it at the start
of each log splitting season.
1. Read, understand, and follow all instructions on the
log splitter and in the manual(s) before attempting to
assemble and operate. Save this manual for reference and
ordering replacement parts.
2. Never allow children under 18 years old to operate this
machine. Children 18 years old and over should be
trained and supervised by an adult who understands the
operation of the log splitter.
3. Never allow an untrained individual to operate the
log splitter.
4. Understand the function of all the controls and their
proper operation. Know how to stop the machine in case
of emergency.
PREPARATION
Work Area
1. Plan your log splitting pattern to avoid discharge of
material toward people, pets, and property. Thrown
objects can cause serious personal injury.
2. Always inspect the area where the log splitter is to
be used. Ensure the surface the machine is on is
23.6 inch – 29.5 inch (60 cm – 75 cm) high, stable, level
and free from overhanging items such as limbs, wires etc.
3. All visitors: children, adults, and pets, should be kept at a
distance from working area, at least 16.5 ft. (5 m) from the
log splitter while it is in operation. Stop the log splitter if
people or pets enter the discharge area.
4. Always observe the surface conditions to avoid slipping,
falling, and unexpected objects.
5. Avoid Dangerous Environments – Don’t use appliances in
damp or wet locations. Do not operate the log splitter in
the rain or wet conditions.
6. Operation of the log splitter where temperatures
are below 41ºF (5ºC) or above 104ºF (40ºC), at a high
altitude and/or high humidity may result in a malfunction
of the machine. Do not use the log splitter in poor
environmental conditions.
7. Ensure electrical conditions meet requirements (see
Electric Safety).
8. Do not use the machine where gasoline, natural gas or
other ammable vapors are present. The electric motor
may spark and cause an explosion or re.
Protective Clothing
1. Thrown objects can cause serious injury to the eyes and
exposed body. Always wear safety glasses or eye shields
during operation and while performing an adjustment or
repair. Always use face or dust mask if operation is dusty.
2. Use of rubber gloves and substantial footwear is
recommended when working outdoors. Wear protective
hair covering to contain long hair.
3. Always operate wearing adequate protective garments.
Dress Properly – wear jewelry or other loose Do not
clothing, which could become entangled in moving parts.
Wear footwear that provides protection for the feet and
ensures sure footing.
4. Always use ear protection if the noise level exceeds 85
dB. Observe any noise prevention regulations and laws.
5. Inspect the log splitter for worn, missing or damaged
parts and safety labels. See maintenance section for
detailed instructions.
6. Use the Right Appliance – Do not use this appliance for
any job except that for which it is intended.
Wood Condition
1. Do not split oversized logs (max. log diameter: 10 inch,
max log length: 20.5 inch). attempt to split “hard” Do not
wood that requires more than 5 seconds to split.
2
2. Ensure the log is free from items that may be projected or
cause damage to the machine (ie.: nails, wire).
3. Ensure the end of the log is cut square and all branches
have been cut ush.
OPERATION
Operator Requirements
1. Only one person shall operate the log splitter. All other
individuals and animals shall maintain a safe distance
during operation (see safety warning in Preparation).
2. Always operate the machine in a standing position and in
a location that is not in the path of projected debris. The
location of the machine should provide safe footing and
balance for the operator.
3. Do not operate the machine while under the inuence of
alcohol, drugs or physically, mentally fatigued. Always be
alert and watch what you are doing!
4. Contact with the moving parts can amputate body parts.
Do not put any part of your body near moving parts.
Workload Requirements
1. Never exceed the operating capacity of the log splitter.
2. Always split the log in the direction of the grain. Do not
place a log across the log splitter.
3. Never split more than one log at a time.
4. Do not load a log when the ram is moving.
Log Splitting
1. Remove any keys and adjusting wrenches before turning
the machine ON.
2. Do not use accessories or attachments that are not
recommended in this manual.
3. Place the log on the log retention brackets. Do not hold or
secure the log with your hands.
4. Do not split wood that takes more than 5 seconds to split.
Doing so will apply excessive pressure on the ram cylinder
and damage the machine.
5. Do not push/force the log onto blade. Always let the blade
initiate splitting the log.
6. If the log moves during operation, stop and reset.
7. If a log is jammed do not request assistance of a second
person. Ensure the machine power is disconnected and
built up pressure released before attempting to
release log.
8. Ensure the machine is turned OFF when not in use. If
the machine is left unattended then disconnect power to
the machine.
MAINTENANCE AND STORAGE
1. Maintain or replace safety and instruction labels. Ensure
safety guards are in place.
2. Disconnect the power and ensure built up pressure has
been released from the tool before cleaning, repairing, or
inspecting the log splitter.
3. For best operation keep the blade sharp, moving parts
lubricated and the machine cleaned.
4. Always check for damaged or worn parts, alignment of
moving parts, and tightness of bolts and screws before
each use.
5. Replace oil as specied in the Maintenance section.
Follow all local regulations and laws concerning disposal
of waste oil.
6.
Qualied mechanics and electricians must carry out repairs.
7.
When not in use, always store the machine in a secure
location that children cannot access. Store the machine in a
dry environment. The machine can be transported or stored in
the ambient temperature between 77ºF – 131ºF (25ºC – 55ºC).
Electrical Safety
1. Ground fault circuit interrupter (GFCI) protection should
be provided on the circuit(s) or outlet(s) to be used for the
log splitter. Receptacles are available having built-in GFCI
protection and may be used for this measure of safety.
2. To reduce the risk of electric shock, this appliance has a
3-prong grounding plug. Use this appliance only with a
3-prong, UL-listed (CSA certied in Canada) extension
cord recommended for outdoor use. Use only 3-wire
extension cords that have 3-prong grounding plugs and
3-pole receptacles that accept the tool’s plug.
3. To prevent electric shock, use only with an extension cord
suitable for outdoor use, such as SW, SOW, STW, STOW,
SJTW, or SJTOW.
Before use, check that the extension cord is in good
condition. When using an extension cord, make sure to
use one heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power
and overheating.
Extension Cord
Length
Wire Gauge (A.W.G.):
Up to 25 ft
(7.5 m)
+20 ft - 50 ft
(+7.5 m - 15 m)
14 12
m WARNING m
Electric shock may cause SEVERE INJURY or
DEATH. Heed these warnings:
• Do not allow any part of the log splitter to make
contact with water while it is in operation. If the
appliance becomes wet while turned o, wipe dry
before starting.
• Use only a UL-, CSA-, or ETL-rated extension cord for
outdoor, all-weather use.
• Do not use an extension cord over 50 ft (15m).
• Do not touch the appliance or its plug with wet hands
or while standing in water. Wearing rubber boots
oers some protection.
EXTENSION CORD CHART
3
4. To prevent the appliance cord from disconnecting from
the extension cord during operation, make a knot with the
two cords as shown in Table 1.
5. Do not abuse the cord. Never pull the log splitter by the
cord or yank the cord to disconnect it from the receptacle.
Keep the cord away from heat, oil, and sharp edges.
GROUNDING INSTRUCTIONS
1. In the event of a malfunction or breakdown, grounding
provides a path of least resistance for electric current to
reduce the risk of electric shock. This tool is equipped
with an electric cord having an equipment-grounding
conductor and a grounding plug.
2. The plug must be plugged into a matching outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
3. Do not modify the plug provided – if it will not t the outlet,
have the proper outlet installed by a qualied electrician.
4. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that
is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the
electric cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal.
5. Check with a qualied electrician or service personnel if
the grounding instructions are not completely understood,
or if in doubt as to whether the tool is properly grounded.
6. Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept the
tool’s plug.
7. Repair or replace damaged or worn cord immediately.
8. This tool is intended for use on a circuit that has an outlet
that looks like the one illustrated in Sketch A in Figure
2. The tool has a grounding plug that looks like the plug
illustrated in Sketch A in Figure 2. A temporary adapter,
which looks like the adapter illustrated in Sketches B
and C, may be used to connect this plug to a 2-pole
receptacle as shown in Sketch B if a properly grounded
outlet is not available. The temporary adapter should be
used only until a properly grounded outlet can be installed
by a qualied electrician. The green-colored rigid ear,
lug, and the like, extending from the adapter must be
connected to a permanent ground such as a properly
grounded outlet box.
PERMANENTLY CONNECTED TOOLS
1. This tool should be connected to a grounded metal
permanent wiring system; or to a system having an
equipment-grounding conductor.
2. USE PROPER EXTENSION CORD. Make sure your
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord
will cause a drop in line voltage resulting in loss of power
and overheating. Table 2 shows the correct size to use
depending on cord length and nameplate ampere rating.
If in doubt, use the next heavier gauge. The smaller the
gauge number, the heavier the cord.
EXTENSION CORDS
1. Use only three-wire outdoor extension cords that have
three-prong grounding plugs and grounding receptacles
that accept the appliance’s plug.
Cord set
(B) Connect plug and receptacle
Appliance cord
(A) Tie cord as shown
Table 1. Method of Securing Extension Cord
Table 2
Grounding methods
GROUNDING PIN
COVER OF
GROUNDED
OUTLET BOX
ADAPTER
METAL SCREW
GROUNDING
PIN
GROUNDING
MEANS
Product specificaties
| Merk: | Sun Joe |
| Categorie: | Splitter |
| Model: | LJ602E |
Heb je hulp nodig?
Als je hulp nodig hebt met Sun Joe LJ602E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Splitter Sun Joe
2 Maart 2023
4 Februari 2023
5 November 2022
Handleiding Splitter
- Splitter Samsung
- Splitter Abus
- Splitter Akasa
- Splitter Aluratek
- Splitter Apc
- Splitter Audio-Technica
- Splitter Audiovox
- Splitter Behringer
- Splitter D-Link
- Splitter Digitus
- Splitter Fujitsu
- Splitter Furuno
- Splitter Hyundai
- Splitter Icy Box
- Splitter Ideal
- Splitter InFocus
- Splitter Konig
- Splitter LevelOne
- Splitter Manhattan
- Splitter Marmitek
- Splitter Mercury
- Splitter Monacor
- Splitter Nedis
- Splitter Newstar
- Splitter Scheppach
- Splitter Simrad
- Splitter Texas
- Splitter Zipper
- Splitter Shure
- Splitter Televés
- Splitter ACG
- Splitter Atlona
- Splitter SIIG
- Splitter Tripp Lite
- Splitter Rane
- Splitter Gefen
- Splitter Lindy
- Splitter Black Box
- Splitter IFM
- Splitter ART
- Splitter ATen
- Splitter AMX
- Splitter Crestron
- Splitter StarTech.com
- Splitter Advantech
- Splitter Smart-AVI
- Splitter Xantech
- Splitter Kramer
- Splitter KanexPro
- Splitter Botex
- Splitter Ecler
- Splitter Rose Electronics
- Splitter Palmer
- Splitter SmartAVI
- Splitter Klover
- Splitter Key Digital
- Splitter Omnitron Systems
- Splitter Rolls
- Splitter WyreStorm
- Splitter MuxLab
- Splitter C2G
- Splitter Club 3D
- Splitter CLUB3D
- Splitter Comprehensive
Nieuwste handleidingen voor Splitter
20 November 2024
20 November 2024
20 November 2024
20 November 2024
20 November 2024
17 November 2024
17 November 2024
17 November 2024
13 November 2024
13 November 2024