Summit Audio TD-100 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Summit Audio TD-100 (14 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Summit Audio Model TD-100
Instrument Preamp and Tube Direct Box
Summit Audio, Inc.
P.O. Box 223306
Carmel, CA 93922
(831) 728-1302
email: sound@summitaudio.com
Operation Manual
Model TD-100 Tube Direct Box
2
Introduction
The TD-100 is a single channel direct box and instrument
preamp featuring a hybrid signal path utilizing a solid state
output device and a 12AX7A/ECC83 vacuum tube. This
unique combination of of solid state and vacuum tube tech-
nology gives the TD-100 the benefits of both worlds: the high
reliability and long life of solid state and the warm overtones
associated with vacuum tubes. Other great features such as
continuously variable input impedance, polarity switching, and
a headphone output make the TD-100 a great sounding tool
for the studio or the stage. Enjoy!
Features
Ease of Operation
Headphone Output
Variable Input Impedance
Direct Output for easy parallel connections
Balanced Outputs
Hand Crafted in the U.S.A.
Carefully unpack the TD-100 and it’s power cord. Save the
carton and packing material for possible future use. Before
powering up the unit, read this manual and observe the cau-
tions for HIGH VOLTAGE.
DANGER!
HIGH VOLTAGE
IMPORTANT: Check
the back panel to make
sure the TD-100 is
configured for the volt-
age used in your coun-
try. This is done at the
factory ONLY.
Model TD-100 Tube Direct Box 3
Front Panel
Front Panel
Ground Lift Switch
This two-position switch removes the third prong of the
power cable from the circuit. Lifting the ground can some-
times reduce the hum caused by a ground loop in your audio
system.
Polarity Switch
This switch changes the polarity of the outgoing signal.
Direct Instrument Output
This jack mirrors the instrument input. Plug your instrument
into the input and run a line from this ouput to the input on
your amplifier. This output is not affected by the Loading
control.
Instrument Input
Input for your bass, guitar, keyboard or other instrument.
The maximum input level is +24dB.
SIGNAL DRIVE
024
1M
10K 2M
LOADING
INPUT
DIRECT OUT OUTPUT GAIN
SIGNAL
GROUND LIFT
POLARITY
+- ON OFF
INS TRUM ENT PRE-AM P
TD-100
TUBE DIRECT


Product specificaties

Merk: Summit Audio
Categorie: Receiver
Model: TD-100

Heb je hulp nodig?

Als je hulp nodig hebt met Summit Audio TD-100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver Summit Audio

Handleiding Receiver

Nieuwste handleidingen voor Receiver