Strymon Lex Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Strymon Lex (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Product Introduction
Born to Revolve.
The classic, unmistakable sound of the most sought-after rotating speaker system, faithfully
recreated using hand crafted algorithms and monstrous processing power.
Extensive control over the tonality and mechanics of the system. Manipulate rotor speed,
horn level, acceleration time, microphone distance, tube drive, and volume level.
Go from a maelstrom of dramatic, up-close, sweeping and swirling sounds, all the way to
mellow, tranquil and calming undulations. All in a compact, pedalboard-friendly format.
Contact: Ethan Tufts / Director of Marketing / ethan@strymon.net / 805.496.5115 x15
Born to Revolve.
When we decided to create a studio-class pedal that faithfully recreates the classic,
unmistakable sound of the most sought-after rotating speaker system, we prepared to study
every nuance and finest detail. The Strymon sound design labs have been filled with those
signature, swirling, three-dimensional sounds, as we painstakingly analyzed and recreated
the physics and mechanics behind these systems.
Lex provides you with a complete, accurately reproduced rotary system: the low-frequency
bass rotor, the rotating treble horn, the tube-driven amplifier, finely tuned microphone
placement, and all the complex sonic interactions between these elements. Utilizing a
ridiculously powerful SHARC DSP, every drop of processing power is harnessed to
authentically represent these intricate details.
You get seven parameters to tweak, allowing extensive control over the tonality and
mechanics of the rotating speaker system. You can manipulate each element, from rotor
speed, horn level, acceleration time, microphone distance, tube drive and saturation, and
volume level. Go from a maelstrom of dramatic, up-close, sweeping and swirling sounds, all
the way to mellow, tranquil and calming undulations. All of this without a behemoth cabinet,
microphone setup, and costly motor maintenance.
Read the Lex Rota ry white paper and learn how we studied and captured every rotating speaker system detail.
Rotary Adjustment and Tone Shaping
Front Panel Knobs
Four rotary adjustment and tone shaping knobs: Fast Rotor Speed, Preamp Drive, Mic
Distance, Horn Level.
Fast Rotor Speed adjusts the rotational speed of the effect when spinning in Fast mode. Go
from a relaxed 4Hz rotation to a frenetic spin of greater than eight rotations per second.
Preamp Drive overdrives the input feeding the rotary speaker effect. Harmonics are created
that add growl and fatness, adding a whole new dimension when set into motion.
Mic Distance varies the placement of the microphones at the horn (stereo pair) and rotor
(single mic). Choose from up close, tight and intense, to distant miking with evened-out
fluctuations.
Horn Level allows you to adjust the horn volume. Adjust in conjunction with Mic Distance to
find the desired amount of high-end, and to match the sound with your particular setup.
Secondary Functions
Threehidden” knobs for extensive tweaking: Slow Rotor Speed, Acceleration Time, +/- 6dB
Boost/Cut. Your 4-knob Lex Rotary is actually a 7-knob rotating speaker machine!
Slow Rotor Speed adjusts the rotational speed of the effect when spinning in Slow mode. At
minimum Slow Rotor setting, the speed is zero, or “braked, so you can set up a one-speed
rotary system that switches between fast and stationary.
Acceleration Time varies the time it takes for the Lex rotating assembly to speed up and
slow down. Set a quick acceleration if you’re interested in the destination, or select a slower
acceleration if you think the fun is in getting there. At all settings, the drum will take longer
than the horn to reach its final speed.
+/- 6dB Boost/Cut allows balancing the output level under all conditions. Achieve a plus or
minus 6dB boost or cut when the pedal is engaged.
More Features
Fast/S Slow peed switch
Instantly alternate between a fast and slow rotor speed. Ramp up and slow down with the
press of a switch.
Rotary Brake
Press and hold the Fast/Slow switch to put the brakes on. The Lex rotary will wind down and
stop. When at rest, the horn and drumbrake angle” is optimally positioned for consistent
results. Release the Fast/Slow switch and the rotary will begin to spin.
Bi-Amping
Lex provides you with a selectable Bi-Amp mode to send bass rotor signal out to the Left
output, and the treble horn to the Right output. Stack two cabinets and add another
dimension to your sound.


Product specificaties

Merk: Strymon
Categorie: Niet gecategoriseerd
Model: Lex

Heb je hulp nodig?

Als je hulp nodig hebt met Strymon Lex stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Strymon

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd