Strymon Brigadier Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Strymon Brigadier (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 150 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
®
dBucket Delay
USER MANUAL
Brigadier - dBucket Delay User Manual ®
pg 2
TIME: Controls the delay
time according to the selected
delay mode. Delay clock
is continuously variable so
that turning it while repeats
are happening can produce
interesting pitch effects.
REPEATS: Varies the
number of repeats from
one to runaway oscillation.
When set to 3:00, a
sustained infinite repeat is
achieved without runaway.
MIX: Controls the balance of dry
signal wet signal and from 100%
dry at minimum to 100% wet
at maximum. The occurs mix
entirely in . Set to 3:00 to analog
get a 50/50 mix.
BUCKET LOSS:
Controls the
amount of bucket
loss at each stage
in the dBucket
algorithm, from no
loss at minimum,
to full noisy loss at
maximum. Set to
3:00 to get maximum
distortion loss with
just a hint of noise.
Increasing from 3:00
adds more noisy
loss. Hold TAP TIP:
and BYPASS while
turning the knob to
adjust the for filter
darker or brighter
repeats (see pg 5 for
more info).
MOD:
Adds LFO modulation
to the delay time.
Modulation is off at
minimum setting. The
modulation speed is
slow in the first half
of the knob, and fast
in the second half of
the knob, increasing in
intensity as the knob is
turned clockwise.
TAP FOOTSWITCH:
Tap to set the delay time. quarter notes
The TAP LED will flash to indicate the
tempo. Holding the tap footswitch will TIP:
result in .infinite repeats
BYPASS FOOTSWITCH:
Engages and disengages effect. Bypass mode is
true bypass by default. LED on indicates that the
effect is engaged. Hold the bypass footswitch TIP:
during power up to change the bypass mode to
analog bypass with (delay persist).trails
MIXTIME
REPEATS
short
med
long
BYPASSTAP
®
dBuc ke t d e la y
MODBUCKET LOSS
MODE TAP
quarter
dot
triplet
Front Panel
MODE SWITCH:
Controls the delay time range
by adjusting the number of
dBucket ‘chips’ in the delay.
Short mode ranges from
40ms to 400 ms med, from
100ms to 1000ms long, and
from 500ms to 5s
TAP SWITCH:
Changes the tap
subdivision between
quarter notes,
dotted eighth notes,
and eighth note
triplets.
TIP: BYPASS TAP Hold down and while turning the to achieve a +/- 3dB MIX knob
boost or cut when the pedal is engaged (12:00 on the Mix knob is unity gain).
Brigadier - dBucket Delay User Manual ®
pg 3
EXP
INPUT
9VDC
+-
RIGHT OUTLEFT OUT
High impedance
mono input.
Stereo outputs.
Use LEFT OUT
for mono signal
output.
Standard 9V DC
center negative
power input.
200 mA power
consumption.
Connect a standard TRS
expression pedal for continuous
control over any selectable knob
parameter. To select the knob
controlled by the expression
pedal, hold the TAP footswitch
during power up. The first knob
turned is then then assigned
to the expression pedal. The
maximum position the knob
is turned up to becomes the
expression pedal “toe down”
maximum value.
Rear Panel


Product specificaties

Merk: Strymon
Categorie: Niet gecategoriseerd
Model: Brigadier

Heb je hulp nodig?

Als je hulp nodig hebt met Strymon Brigadier stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Strymon

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd