Strong SRT ANT100 Handleiding

Strong Tv-antenne SRT ANT100

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Strong SRT ANT100 (10 pagina's) in de categorie Tv-antenne. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
User Manual
Active Outdoor DVB-T/T2 Antenna
SRT ANT100
30 Sep 2021 19:52
Subject to alterations. In consequence of continuous research and development technical specications, design and appearance of products may
change. LTE is a trademark of ETSI, all other product names are trademarks or registered trademarks of their respective owners.
Β© STRONG 2021. All rights reserved.
TABLE OF CONTENTS
1.0 INTRODUCTION 2
2.0 PACKAGE CONTENTS 2
3.0 SAFETY NOTES 4
4.0 CONNECTING THE ANTENNA 4
4.1 To power the antenna with digital terrestrial receiver 5
4.2 To power the antenna with external power adapter 7
5.0 INSTALLATION OF THE ANTENNA 9
1
1.0 INTRODUCTION
Thank you for purchasing the STRONG SRT ANT100 DVB-T/T2 antenna. This antenna has been
specially designed to receive digital terrestrial signals. It can be connected to any Digital Terrestrial
Receiver (DVB-T/ T2) and is specially designed for outdoor use. The antenna housing is weather-proof
sealed. With the supplied multi-functional mounting material, you can install the antenna on any pole
outside the house.
This DVB-T/T2 antenna is an β€œActive type” antenna; it has a built-in low noise amplier that amplies
the received signal for better performance. The antenna therefore needs 5 V power supplied by your
terrestrial receiver, or by an AC/DC adapter (supplied with the antenna).
We recommend that you carefully read this user manual before you install the antenna. This will help
you to get the best performance of your antenna.
Specications
Frequency range: UHF 470 ~ 862 MHz
Active Antenna Gain: Max. 16 dBi for UHF
RF Output Impedance: 75 Ohm
Power Supply: 5 V DC / 45 mA via ANTENNA connector of the digital terrestrial
receiver or
2 powering methods: 5 V DC / 1 mA via External 230 V AC to DC adapter with power
injector (included)
Special features:
ξš„Choice of installation method: pole-mounted installation
ξš„Outdoor UHF 16-18 dB TV Antenna for DVB-T/T2 signals reception
ξš„Compatible with DVB-T/T2 receivers supporting active antenna output (5V)*
ξš„External 5G/4G LTE lter included for better reception
ξš„Integrated high gain amplier for optimal signal strength and performance
ξš„Low V.S.W.R
ξš„Compatible with horizontal and vertical polarizations
ξš„2-way mounting
ξš„U mounting system, 20 meters RG6 Coaxial cable, 5V inserter for a quick and easy installation
ξš„Durable and weather resistant
ξš„Excellent reception also in harsh environment
ξš„Extremely compact size
*In case 5 V is not supported by the receiver, a power adaptor (included) is required.
2.0 PACKAGE CONTENTS
Fig. 1
Outdoor TV Antenna with integrated amplier
1. Mount system
2. 5G/4G Filter SRTANT20
3. Short coax cable
4. IEC type male to F type female fast connector
5. Inserter
6. 20 m Black RG6 coaxial cable with IEC male and F-connector
7. 5V Adapter (USB)
2


Product specificaties

Merk: Strong
Categorie: Tv-antenne
Model: SRT ANT100

Heb je hulp nodig?

Als je hulp nodig hebt met Strong SRT ANT100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tv-antenne Strong

Handleiding Tv-antenne

Nieuwste handleidingen voor Tv-antenne