Stiebel Eltron CNS 100-1 E Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Stiebel Eltron CNS 100-1 E (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 154 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
OPERATION AND INSTALLATION
GA DE OPERACN E INSTALACN
MODE DEMPLOI ET MANUEL DINSTALLATION
WALL MOUNTED CONVECTION HEATER
CONVECTOR DE PARED
APPAREIL DE CHAUFFAGE À CONVECTION MURAL
» CNS 100-1 E
» CNS 100-2 E
» CNS 150-1 E
» CNS 150-2 E
» CNS 200-2 E
» CNS 240-2 E
STIEBEL ELTRON, Inc.
17 West Street | West Hat eld, MA 01088
Tel. 413-247-3380 | Fax 413-247-3369
Email info@stiebel-eltron-usa.com
www.stiebel-eltron-usa.com
Certified to ANSI/UL Std. 2021
Conforms to CAN/CSA Std. 22.2 No. 46
Certificación con ANSI/UL Std. 2021
Conforme a CAN/CSA Std. 22.2 No. 46
Certifié à la norme ANSI/UL Std. 2021
Conforme à la norme CAN/CSA Std. 22.2 No. 46
2 |CNS E WWW.STIEBEL-ELTRON-USA.COM
CONTENTS | OPERATION
IMPORTANT INSTRUCTIONS
OPERATION
1. IMPORTANT INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic precautions should always
be followed to reduce the risk of fi re, electric shock, and injury to
persons, including the following:
1. Read all instructions before installing or using this heater.
2. This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes, etc. and curtains at
least 3 feet (1 m) from the front of the heater and keep them at
least 3 feet (1 m) away from the sides and rear.
3. Extreme caution is necessary when any heater is used by or
near children or invalids and whenever the heater is left operating
and unattended.
4. Do not operate any heater after it malfunctions. Disconnect
power at service panel and have heater inspected by a reputable
electrician before reusing.
1.1 Document information
The chapter Operation is intended for users and heating
contractors.
The chapter Installation is intended for heating contractors.
Read these instructions carefully before using the
appliance and retain them for future reference. Pass
on the instructions to any new users.
1.2 Key to symbols
1.2.1 Layout of safety information
Safety information comprises a warning symbol, a keyword and
a text giving information. Safety information is printed on a grey
background.
Example:
DANGER: Electrocution
Install the appliance in such a way that control
equipment...
1 2 3
4
1 Symbol (see chapter on warning symbols/symbols)
2 Keyword (see chapter on keywords)
3 Description (see chapter on warning symbols/symbols)
4 Information text
OPERATION
1. Important Instructions _________________________________________2
1.1 Document information ____________________________________________ 2
1.2 Key to symbols ______________________________________________________ 2
2. Safety ____________________________________________________________3
2.1 Intended use _________________________________________________________ 3
2.2 Safety information _________________________________________________ 3
2.3 ETL / UL designation _______________________________________________ 3
2.4 Type label ____________________________________________________________ 3
3. Register your product __________________________________________4
4. Appliance description __________________________________________4
5. CNS E Operation ________________________________________________4
5.1 Description of the user interface ________________________________ 4
5.2 Frost protection _____________________________________________________ 4
5.3 Limiting the temperature controller ____________________________ 4
5.4 Shutting down ______________________________________________________ 5
6. Cleaning, care and maintenance ______________________________5
7. What to do if ... _________________________________________________5
INSTALLATION
8. Safety ____________________________________________________________5
8.1 General safety instructions _______________________________________ 5
8.2 Instructions, standards and regulations _______________________ 5
9. Appliance description __________________________________________5
9.1 Standard delivery ___________________________________________________ 5
10. Installation ______________________________________________________5
10.1 Installing the wall mounting bracket ___________________________ 5
10.2 Appliance installation _____________________________________________ 6
10.3 Dismounting the appliance _______________________________________ 6
10.4 Power supply ________________________________________________________ 6
10.5 Terminal block ______________________________________________________ 6
11. Appliance handover ____________________________________________7
12. Speci cations ___________________________________________________7
12.1 Dimensions __________________________________________________________ 7
12.2 Minimum clearances to hard surfaces _________________________ 7
12.3 Specifi cations ________________________________________________________ 8
12.4 Wiring Diagram _____________________________________________________ 8
13. Warranty _________________________________________________________9
OPERATION
SAFETY
WWW.STIEBEL-ELTRON-USA.COM CNS E| 3
ENGLISH
1.2.2 Warning symbols/symbols
Warning symbol
Description
Injury
Electrocution
Burns or scalding
!
Other situations
Fire
Never cover the appliance
Appliance disposal
1.2.3 Text symbols and layout in this documentation
Read the text next to this symbol carefully.
» The "»" symbol indicates that you should do something. The
action you need to take is described step by step.
Passages with the "" symbol show you lists of items.
1.2.4 Information on the appliance
Never cover the appliance
1.2.5 Units of measurement
The dimensions in this document are given in in
/ mm. Any alternative units of measurements are
specifi ed accordingly.
2. Safety
2.1 Intended use
This appliance is designed to heat living areas.
Any other use beyond that described shall be deemed inappropriate.
Observation of these instructions is also part of the correct use of
this appliance. Any modi cations or conversions to the appliance
void all warranty rights.
2.2 Safety information
Operate the appliance only when fully installed and with all safety
equipment tted.
The heater must be properly installed before it is used.
DANGER: Electrocution
Before cleaning, make sure the power has been
turned off at the circuit breaker panel and that the
heating element of the heater is cool.
WARNING: Fire
Never operate this appliance ...
...in rooms where the appliance is at risk of fi re or
explosion as a result of chemicals, dust, gases or
vapours.
...in the direct proximity of pipes or receptacles that
carry or contain ammable or explosive materials.
...if work such as laying cables, grinding or sealing
is carried out in the installation room.
...if sprays, oor polish or similar products
containing napsan are used. Vent the room
suf ciently before heating.
...if the minimum clearances to adjacent object
surfaces are not maintained, for example to
furniture, net curtains, curtains, textiles or other
ammable materials (see 13.2, “Minimum clearances
to hard surfaces”, pg. 7).
...if an appliance component is damaged, the
appliance has fallen over or already had a fault.
WARNING: Injury
Where children or persons with limited physical,
sensory or mental capabilities are allowed to control
this appliance, ensure that this will only happen
under supervision or after appropriate instructions
by a person responsible for their safety.
Children must be supervised to ensure that they
never play with the appliance.
WARNING: Fire
Never place any ammable, combustible or
insulating objects or materials, such as laundry,
blankets, magazines, containers with fl oor polish or
napsan, spray cans or similar on the appliance or in
direct proximity to it.
WARNING Burns
The surfaces of the appliance casing and the
expelled air become hot during operation (more than
176 °F / 80 °C).
CAUTION: Overheating
Never cover the appliance
Never step on the appliance.
2.3 ETL / UL designation
Conforms to ANSI/UL Std. 2021
Certifi ed to CAN/CSA Std. 22.2 No. 46
2.4 Type label
The type label is located on the right on the exterior of the
appliance.


Product specificaties

Merk: Stiebel Eltron
Categorie: Niet gecategoriseerd
Model: CNS 100-1 E

Heb je hulp nodig?

Als je hulp nodig hebt met Stiebel Eltron CNS 100-1 E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Stiebel Eltron

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd