StarTech.com SATERASER4 Handleiding

StarTech.com Niet gecategoriseerd SATERASER4

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com SATERASER4 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Manual Revision: 04/13/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/SATERASER4.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

SATERASER4

4-Bay Standalone Hard Drive Eraser

for 2.5”/3.5” SATA Drives

*actual product may vary from photos

Instruction manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment o and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Changes or modications not expressly approved by StarTech.com could void the user’s

authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other

protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not

represent an endorsement of a product or service by StarTech.com, or an endorsement of the

product(s) to which this manual applies by the third-party company in question. Regardless

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of

their respective holders.

Instruction manual

Table of Contents

Product diagram ....................................................................................1

Package contents ...................................................................................2

Requirements .........................................................................................2

USB 3.0 and USB 3.1 Gen 1 ...................................................................3

Available erase modes ..........................................................................3

About the LED indicators ......................................................................4

Erase drives .............................................................................................4

Print a receipt..........................................................................................5

Connect the eraser to your computer ................................................. 6

Technical support ...................................................................................7

Warranty information ............................................................................ 7

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	SATERASER4
Kleur van het product:	Zwart
Gewicht:	712 g
Breedte:	96 mm
Diepte:	209 mm
Hoogte:	30 mm
Type stekker:	Type M
Gewicht verpakking:	2604 g
Breedte verpakking:	231 mm
Diepte verpakking:	450 mm
Hoogte verpakking:	85 mm
Materiaal behuizing:	Staal
Vermogen:	84 W
LED-indicatoren:	Activity, Power
Stroom:	1.2 A
Meegeleverde kabels:	USB
Snelstartgids:	Ja
Inclusief AC-adapter:	Ja
Certificering:	RoHS, CE, FCC, TAA, REACH
Plug and play:	Ja
Temperatuur bij opslag:	-20 - 85 °C
Bus type:	USB
Externe adapter:	Ja
Output current:	7 A
Spanning:	12 V
Hostinterface:	USB 3.2 Gen 1 (3.1 Gen 1) Type-B
HDD interface:	Serial ATA, Serial ATA II
Seriële poort(en):	1
(Buitenste) hoofdverpakking hoogte:	850 mm
(Buitenste) hoofdverpakking breedte:	231 mm
(Buitenste) hoofdverpakking lengte:	450 mm
Hoeveelheid per (buitenste) hoofdverpakking:	6 stuk(s)
Aantal USB 3.2 Gen 1 (3.1 Gen 1)-poorten:	1
AC-ingangsspanning:	100 - 240 V
Bedrijfstemperatuur (T-T):	5 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Hot-swap:	Ja
Data transfer snelheid (max):	5 Gbit/s
Maximum HDD capaciteit:	10000 GB
Inbegrepen soorten voedingsstekkers:	ANZ, EU, JP, NA, UK
Dockingstation ondersteund HDD-formaat:	2.5, 3.5 "
Wismodi:	Custom, Enhanced secure, Multi-pass overwrites, Secure, Single-pass overwrite
Schijfpads inbegrepen:	Ja