StarTech.com S251BPU31C3 Handleiding

StarTech.com Niet gecategoriseerd S251BPU31C3

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com S251BPU31C3 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 01/25/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/S251BPU31C3.

Packaging contents

• 1 x USB 3.1 to 2.5 in. SATA HDD enclosure

• 1 x drive cushion

• 1 x USB Type-C™ to Micro B cable

• 1 x quick start guide

System requirements

• 2.5 in. SATA HDD (hard drive) or SSD (solid-state drive) (maximum

height of 9.5 mm)

• USB-enabled computer system with an available USB Type-C port

Note: To obtain the maximum USB throughput, you must use a PC

with a USB 3.1 Gen 2 port.

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/S251BPU31C3.

S251BPU31C3

USB 3.1 (10Gbps) Tool-Free Enclosure for 2.5” SATA SSD/HDD - USB-C

*actual product may vary from photos

Product diagram

Side view

USB 3.1 port

Install the hardware

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your hard drive, you may lose data as a result. Make sure that

you’re properly grounded by wearing an anti-static strap when

you install any computer component. If an anti-static strap isn’t

available, touch a large grounded metal surface for several seconds

to discharge any built-up static electricity.

1. To open the enclosure, slide the top panel away from the USB port

and lift it away from the enclosure base.

2. Attach the included drive cushion to the back side of the

enclosure, opposite of the SATA connector.

3. Connect the 2.5 in. SATA hard drive or solid-state drive.

4. Align the hooks on the top panel with the grooves on the base of

the enclosure and slide the top panel back into place.

Connect the enclosure

Connect the enclosure to the host system using the included USB

cable. When the drive is connected, the operating system detects

the drive and automatically installs the necessary software and

drivers, making the drive accessible as though it’s installed within

the system.

Before you use the hard drive, it needs to be formatted according to

your operating system requirements. To format your newly attached

hard drive or to create partitions, consult the documentation that

came with your operating system at the time of purchase.

Power the enclosure

The hard drive doesn’t require an external power supply, as it’s

capable of receiving enough power from the USB bus that it’s

connected to.

LED indicators

The enclosure features an LED indicator that you can use to monitor

drive activity. When your drive is powered on, the LED indicator is

illuminated. When the drive is being accessed, the LED blinks.

Warning! Don’t remove the hard drive from the host computer

when the LED is blinking, as it could damage the drive and you could

experience lost or corrupted data.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two-year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Disconnect the hard drive

Windows

If you’re using a computer that’s running a version of Windows,

complete the following:

1. On the task bar on your desktop, click the Safely remove

Hardware and Eject Media icon.

2. In the list that appears, click .Eject USB Device

3. When the Safe to Remove Hardware message appears, remove

the hard drive by disconnecting the USB cable between your

computer and hard drive.

Warning! If you remove the hard drive before you receive the

notication that says it’s safe to do so, you could experience lost or

corrupted data.

Mac OS

If you’re using a computer that’s running a version of Mac OS,

complete the following:

1. Close any of the windows that list the contents of the removable

drive.

2. On the desktop, click the icon and drag it onto the USB storage

Trash Can icon on your desktop.

3. Wait 5 seconds and then remove the hard drive from the docking

station.

Prepare the drive for use

If you install a drive that already has data on it, after you plug in the

drive, it appears under My Computer Computer or with a drive letter

assigned to it.

If you install a brand-new drive that doesn’t contain any data, you

must prepare the drive for use.

If you use a computer that’s running Windows® 2000, Windows® XP,

Windows Vista®, or Windows® 7, do the following:

1. Depending on the OS version that you’re running, do one of the

following:

• On your desktop, right-click .My Computer

• On your desktop, right-click Computer.

2. Click .Manage

3. On the Computer Management Disk Management screen, click .

4. A dialog window appears and asks you to initialize the hard drive.

Depending on the version of Windows that you’re running, you

have the option to create either an or a disk.MBR GPT

Note: GPT (GUID partition) is required for hard drives larger than 2

TB but GPT isn’t compatible with some earlier versions of operating

systems. MBR is supported by both earlier and later versions of

operating systems.

5. Locate the disk that is labeled . To conrm that the Unallocated

drive is the correct one, check the drive capacity.

6. Right-click the section of the window that says and Unallocated

click .New Partition

7. To initialize the hard drive in the format of your choice, complete

the on-screen instructions.

When the drive is successfully installed, it appears under My

Computer Computer or with a drive letter assigned to it.

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	S251BPU31C3
Kleur van het product:	Zwart
Gewicht:	69 g
Breedte:	88 mm
Diepte:	132 mm
Hoogte:	15 mm
Gewicht verpakking:	180 g
Breedte verpakking:	178 mm
Diepte verpakking:	137 mm
Hoogte verpakking:	43 mm
LED-indicatoren:	Activity, Power
USB-connectortype:	USB Type-C
Type stroombron:	USB
Meegeleverde kabels:	USB
Aantal USB-aansluitingen:	1
Certificering:	CE, FCC, REACH
USB-versie:	3.2 Gen 2 (3.1 Gen 2)
Materiaal:	Kunststof
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-10 - 65 °C
USB-aansluiting:	Ja
Aantal ventilatoren:	0 ventilator(en)
Luchtvochtigheid bij opslag:	5 - 95 procent
Snelle installatiehandleiding:	Ja
Opslag schijfgrootte:	2.5 "
Maximale opslagcapaciteit:	2 TB
Ondersteunde opslagstationinterfaces:	Serial ATA, Serial ATA II, Serial ATA III
Chipset:	ASMedia - ASM1351
Overdrachtssnelheid:	10 Gbit/s
Aantal storage drives ondersteund:	1
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Type product:	HDD-/SSD-behuizing
Code geharmoniseerd systeem (HS):	84733080
Geslacht USB-connector:	Vrouwelijk
Ondersteunde storage drive hoogten:	5, 7,9.5 mm
UASP-ondersteuning:	Ja