StarTech.com PR12GIP-NETWORK-CARD Handleiding

StarTech.com Netwerkkaart/adapter PR12GIP-NETWORK-CARD

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com PR12GIP-NETWORK-CARD (2 pagina's) in de categorie Netwerkkaart/adapter. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: October 12, 2023

Product ID

PR12GIP-NETWORK-CARD

Port/LED/Connector Function

1Bracket

• Secures the card to the Host Computer Case

• The comes pre-installedFull Prole Bracket

• The is included Low Prole Bracket

2Power Over Ethernet

(PoE) LED Indicator

• Solid Green: PoE has been negotiated and power is

being supplied to the Powered Device

• O: No power output has been negotiated

3Ethernet Port

• Connect an to the Ethernet Cable Network Card

• Supports 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps

• Supports and IEEE 802.3at IEEE 802.3af

• Right LED Indicator Link Speed is

• Solid Green: 2.5Gbps

• Solid Amber: 1Gbps

• O: 10/100Mbps

• Left LED Indicator Link Status is

• Solid Green: Active link

• Flashing Green: Activity

1-Port PCIe 2.5GBase-T Ethernet PoE Network Adapter Card - Intel

4PCIe 2.0 p1-x1 Connector • Insert into a on the PCI Express Slot Host Computer

5SATA Power

Connector

• Connect from the SATA Power Host Computer’s

Power Supply

• Required to enable Power over Ethernet (PoE)

Package Contents

• Network Card x 1

• Low Prole Bracket x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit: www.StarTech.com/PR12GIP-NETWORK-CARD

• Host Computer with an available PCI Express 2.0 or greater slot (x1, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING! Static Electricity PCI Express Cardscan severely damage . Ensure that

you are adequately before you open your or touch Grounded Host Computer Case

the . You should wear an or use anPCI Express Card Anti-Static Strap Anti-Static

Mat Anti-Static Strap when installing any Host Computer component. If an isn’t

available, discharge any built-up static electricity by touching a large Grounded

Metal Surface PCI Express Card for several seconds. Only handle the by its edges and

don’t touch the gold connectors.

1. Turn o the and any that are connected to it Host Computer Peripheral Devices

(e.g. printers, external hard drives, etc.).

2. Unplug the from the back of the .Power Cable Host Computer

3. Disconnect any that are connected to the .Peripheral Devices Host Computer

4. Remove the from the . Cover Host Computer Case

Note: Consult the documentation that came with the for details Host Computer

about doing this safely.

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of the . Host Computer Case

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,

the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Mesures de sécurité

• Assemblez ce produit conformément aux instructions.

安全対策

• 必ず取扱説明書に従って本製品の組み立てを行って下さい。

Misure di sicurezza

• Assicurarsi di Assemblare il prodotto secondo le istruzioni.

Säkerhetsåtgärder

• Se till att du monterar produkten i enlighet med instruktionerna

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Host Computer Case to the back of the .

Note: If you install the into a or a PCI Express Card Small Form Factor Low Prole

Desktop System, it may be necessary to replace the pre-installed standard

Full Prole Bracket Low Prole Bracketwith the included .

7. Connect from the to the SATA Power Host Computer’s Power Supply SATA Power

Connector Network Cardon the rear of the .

Note: If the SATA Power is not connected to the Network Card, Power over Ethernet

(PoE) will be unavailable, but a data connection will still be established.

8. Reinstall the on the .Cover Host Computer Case

9. Reconnect the to the .Power Cable Host Computer

10. Reconnect all of the disconnected in .Peripheral Devices Step 3

11. Power on the and connected .Host Computer Peripheral Devices

12. Connect an to the on the .Ethernet Cable Ethernet Port Network Card

Download the Driver

1. Navigate to: www.StarTech.com/PR12GIP-NETWORK-CARD

2. Click the tab.Drivers & Downloads

3. Under , download the for Windows.Driver(s) Driver Package

Note: Windows usually saves the les to the Downloads folder associated with the user

account (e.g. C:\Users\useraccount\Downloads).

4. the zipped that was downloaded. Click . Right-click Driver Package Extract All

Follow the on-screen instructions to the les. Extract

Note: Ensure to make a note of the location where the drivers were extracted. That

location will be used in later steps.

5. Follow the instructions on the accompanying le for further Intel_Windows_DIG

Installation Instructions.

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under , right-click and click Network Adapters Intel Ethernet Controller I225-V

the option.Properties

3. Conrm that the is installed and working as expected.Driver

Linux

Note: Ensure kernel 5.8 or higher is being used. Execute the following command from

the terminal prompt to check the kernel version, uname -r.

1. Open a and type the command to Terminal Window sudo dmesg | grep Intel

check the Intel Driver Integration.

2. If the drivers are present, the following entry should be present: Intel(R) 2.5G

Ethernet Linux Driver.

Product specificaties

Merk:	StarTech.com
Categorie:	Netwerkkaart/adapter
Model:	PR12GIP-NETWORK-CARD
Kleur van het product:	Zwart
Gewicht:	62 g
Breedte:	54 mm
Diepte:	119 mm
Hoogte:	16 mm
Gewicht verpakking:	70 g
Breedte verpakking:	142 mm
Diepte verpakking:	170 mm
Hoogte verpakking:	30 mm
LED-indicatoren:	Ja
Connectiviteitstechnologie:	Bedraad
Aantal Ethernet LAN (RJ-45)-poorten:	1
Interface:	Ethernet
Duurzaamheidscertificaten:	RoHS
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,2500 Mbit/s
Netwerkstandaard:	IEEE 1588, IEEE 802.1Q, IEEE 802.1as, IEEE 802.1p, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3i, IEEE 802.3u
Temperatuur bij opslag:	-10 - 70 °C
Intern:	Ja
Naleving van duurzaamheid:	Ja
Ondersteunt Linux:	Ja
Spanning:	48 V
Snelle installatiehandleiding:	Ja
Hostinterface:	PCI Express
Andere ondersteundende systemen:	VMware vSphere ESXi
Maximale overdrachtssnelheid van gegevens:	2500 Mbit/s
Quality of Service (QoS):	Ja
Ondersteunde server operating systems:	Windows Server 2019, Windows Server 2022
Chipset:	Intel I225-V
Component voor:	Pc/server
Wake-on-LAN:	Ja
Bedrijfstemperatuur (T-T):	0 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 90 procent
Hoeveelheid Power over Ethernet (PoE) ports:	1
PCI versie:	2.0
Aantal SATA power connectors:	1