StarTech.com PEX4SFF8639U3 Handleiding

StarTech.com Niet gecategoriseerd PEX4SFF8639U3

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com PEX4SFF8639U3 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: February 22, 2023 1:29 PM

Product ID

PEX4SFF8639U3

Component Function

1LED Jumper Pins

• Connect to the LED Lights U.3 to PCIe p1-x4

Adapter Drive to show power/activity

• LED Lights not included

2U.3 (SFF-TA-1001) Drive

Connector

• Connect a to U.3 (SFF-TA-1001) Storage Device

the U.3 to PCIe p1-x4 Adapter

3Drive Mounting Holes • Secure the to the U.3 Storage Device U.3 to PCIe

x4 Adapter

4PCIe p1-x4 Connector • Connect the to theU.3 to PCIe p1-x4 Adapter PCIe

Slot Computerin a

U.3 (SFF-TA-1001) to PCIe 4.0 p1-x4 Host Adapter for 2.5” U.3 NVMe SSDs

Requirements

For the latest drivers/software, technical specications, and declarations of

conformance, please visit: www.StarTech.com/PEX4SFF8639U3

Package Contents

• U.3 to PCIe p1-x4 Adapter x 1

• Drive Mounting Screws x 4

• Quick-Start Guide x 1

Installation

Connect an SSD to the Drive Adapter

Warning! Drives should be handled carefully, especially when being transported.

If not handled with care, lost or corrupted data may be experienced. Ensure that the

Installer Computer Case U.3 is properly grounded before opening the or touching the

to PCIe p1-x4 Adapter Installer . The should wear an when installing Anti-Static Strap

any computer component. If an is not available, discharge any Anti-Static Strap

built-up static electricity by touching a large for several Grounded Metal Surface

seconds. Only handle the U.3 to PCIe p1-x4 Adapter by its edges and do not touch the

gold connectors.

1. Carefully slide the into the and connect it to theSSD U.3 to PCIe p1-x4 Adapter U.3

(SFF-TA-1001) Connector on the card.

2. Turn over the .U.3 to PCIe p1-x4 Adapter

3. Use a and insert the four through Phillips Screwdriver Drive Mounting Screws

the on the and into the .Drive Mounting Holes U.3 to PCIe p1-x4 Adapter SSD

4. Tighten the to secure the drive to the .Screws U.3 to PCIe p1-x4 Adapter

Installing the Drive Adapter

1. Turn o the and any connected or (such as Computer Devices Peripherals

printers and external storage).

2. Unplug the from the back of the .Power Cable Computer

3. Disconnect any connected to the .Peripheral Devices Computer

4. Open the , referring to the documentation that came with the Computer Case

computer system for guidance.

1 2 3

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

5. Locate an available and remove the corresponding PCIe p2-x4 Slot Metal Cover Plate

from the back of the . Refer to the documentation that came with Computer Case

the for detailed instructions on how to do this.Computer System

Note: The is compatible with x4, x8, or x16 PCIe slots.U.3 to PCIe Adapter

6. Gently insert the into the available and use a U.3 to PCIe p2-x4 Adapter PCIe Slot

Computer Case Screw (not included) to secure the bracket to the back of the case.

7. Replace the cover on the .Computer Case

8. Reconnect the to the back of the and reconnect all Power Cable Computer

Peripheral Devices Step 3that were disconnected in .

9. Turn on the and the connected .Computer Peripheral Devices

Note: In the event that the drive is new or does not already contain data, it may be

necessary to initialize the drive. For instructions on how to complete this process, please

refer to the documentation of the operating system installed on the computer.

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	PEX4SFF8639U3
Kleur van het product:	Rood
Gewicht:	62 g
Breedte:	90 mm
Diepte:	154 mm
Hoogte:	1.5 mm
Gewicht verpakking:	130 g
Breedte verpakking:	215 mm
Diepte verpakking:	155 mm
Hoogte verpakking:	30 mm
LED-indicatoren:	Activity, Power
Plug and play:	Ja
Temperatuur bij opslag:	-40 - 80 °C
Intern:	Ja
Snelle installatiehandleiding:	Ja
Mean time between failures (MTBF):	21693912 uur
Hostinterface:	PCIe
Inclusief schroeven:	Ja
(Buitenste) hoofdverpakking hoogte:	490 mm
(Buitenste) hoofdverpakking breedte:	460 mm
(Buitenste) hoofdverpakking lengte:	340 mm
Hoeveelheid per (buitenste) hoofdverpakking:	60 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	20 - 80 procent
Hot-swap:	Nee
Output interface:	U.3
Ondersteunde storage drive hoogten:	5, 7,9.5, 12.5, 15 mm