StarTech.com M2-REMOVABLE-PCIE-N1 Handleiding

StarTech.com Niet gecategoriseerd M2-REMOVABLE-PCIE-N1

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com M2-REMOVABLE-PCIE-N1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 16, 2023 4:31 PM

Product ID

M2-REMOVABLE-PCIE-N1

Component Function

1Full-Prole Bracket • Secure the to the M.2 to PCIe Adapter Computer

Case

2Bracket Mounting Screws • Secure the to the Full/Low Prole Bracket M.2 to

PCIe Adapter

3M.2 Drive Tray Hosts the for the • M.2 Drive M.2 to PCIe Adapter

4PCIe p1-x4 Connector • Connect the to a PCIe to M.2 to PCIe Adapter

PCIe Slot Computer in the

M.2 NVMe SSD Bay for PCIe p1-x4 Expansion Slot

5Key Lock for Drive Tray • Use the included to Lock or Unlock the Key M.2

Drive Tray M.2 to PCIe Adapter from the

6Drive LED Indicator

• Red: Connected Drive is Not Supported

• Green: Connected Drive is Supported

• Yellow: Flashes to indicate Drive Activity

Requirements

For the latest drivers/software, technical specications, and declarations of

conformance, please visit: www.StarTech.com/M2-REMOVABLE-PCIE-N1

Package Contents

• M.2 to PCIe Adapter x 1

• Low-Prole Bracket x 1

• M.2 Drive Tray x 1

• Quick-Start Guide x 1

Installation

Warning: PCIe Cards can be damaged by static electricity. Ensure that the Installer

is properly grounded before they open the Computer Case or touch the M.2 to PCIe

Adapter. The Installer should wear an Anti-Static Strap when installing any computer

component. If an Anti-Static Strap is not available, discharge any built-up static

electricity by touching a large Grounded Metal Surface for several seconds. Only

handle the M.2 to PCIe Adapter by its edges and do not touch the gold connectors.

(Optional) Installing the Low Prole Bracket

Note: By default the is attached to the Full Prole Bracket M.2 to PCIe Adapter.

Depending on the system conguration the may need to be Full Prole Bracket

removed and replaced with the (included).Low Prole Bracket

1. Using a , remove the two securing Small Phillips Head Screwdriver Bracket Screws

the to the . Set the aside Full Prole Bracket M.2 to PCIe Adapter Bracket Screws

as they will be used to attach the .Low Prole Bracket

2. Align the on the with the on the Screw Holes M.2 to PCIe Adapter Screw Holes

Low Prole Bracket ensuring the M.2 to PCIe Adapter is sitting on-top of the

Screw Holes Low Prole Bracket on the .

3. Insert the through the and into the Bracket Screws M.2 to PCIe Adapter Screw

Holes Low Prole Bracket on the .

4. Using the , tighten the , being Small Phillips Head Screwdriver Bracket Screws

careful not to over-tighten them.

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

3. Locate an open and remove the corresponding PCIe x4, p2-x8 or x16 Slot Metal Cover

Plate Computer Case Metal Cover Plate from the rear of the . In most instances, the

is attached to the rear of the with a single . Computer Case Phillips Head Screw

Save this for the next step.Phillips Head Screw

4. Gently insert the into the open and M.2 to PCIe Adapter PCIe x4, p2-x8 or x16 Slot

fasten the to the rear of the , using the Bracket Computer Case Phillips Head Screw

from step 4.

5. Replace the from the that was removed in .Cover Computer Step 2

Install the Drive Tray

Note: Hot swapping the drives while the computer is turned on is not supported.

Please ensure the computer is powered o before removing or installing the Drive

Tray.

1. Ensure the is in the position. Drive Tray Lock Unlocked

2. Align the with the located on the at Drive Tray Drive Tray Bay M.2 to PCIe Adapter

the rear of the .Computer

3. Gently insert the until it is fully inserted.Drive Tray

4. Use one of the included to the in place.Keys Lock Drive Tray

5. Reconnect the to the rear of the .Power Cable Computer

6. Power on the and all connected .Computer Peripheral Devices

Install the M.2 Storage Drives

1. Remove the from the Drive Tray M.2 to PCIe Adapter

2. Remove the from the by pressing the two Heat Sink Cover Removable Drive Tray

Heat Sink Latching Locks towards each other.

3. Place the next to the and note the that Drive Drive Tray Adjustable Stando Holes

match the length of the .Drive

4. Remove the Adjustable by pressing the green side of the Adjustable Stando

Stando and sliding it towards the front of the tray.

5. Install the in the that matches the length of the Stando Adjustable Stando Holes

Drive.

6. Insert the into the Drive Removable Drive Tray’s M.2 connector

Note: The M.2 Connector on the Drive is M-Keyed so that it only ts M-Keyed NVMe

M.2 Storage Devices

7. Gently slide the into the of the , and M.2 Drive Connector M.2 Connector Drive Tray

press the down toward the adapter until the is properly seatedDrive Drive

8. Install the to secure the in place.Drive Mounting Screw Drive

9. Replace the Heat Sink Cover.

Install the Card

1. Turn o the and disconnect the and any Computer Power Cable Peripheral Devices

that are connected (e.g. printers, external hard drives, etc.).

2. Remove the from the .Cover Computer Case

Note: Consult the documentation that came with the Computer for details about how

to do this safely.

Product specificaties

Merk:	StarTech.com
Categorie:	Niet gecategoriseerd
Model:	M2-REMOVABLE-PCIE-N1
Kleur van het product:	Zwart, zilver
Gewicht:	65 g
Breedte:	120 mm
Diepte:	167 mm
Hoogte:	19 mm
Gewicht verpakking:	215 g
Breedte verpakking:	151 mm
Diepte verpakking:	230 mm
Hoogte verpakking:	46 mm
LED-indicatoren:	Ja
Bedoeld voor:	PC
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Temperatuur bij opslag:	-35 - 70 °C
Aantal ventilatoren:	0 ventilator(en)
Intern:	Ja
Naleving van duurzaamheid:	Ja
Snelle installatiehandleiding:	Ja
Mean time between failures (MTBF):	10000 uur
Hostinterface:	PCIe
Montagebeugels meegeleverd:	Ja
(Buitenste) hoofdverpakking hoogte:	270 mm
(Buitenste) hoofdverpakking breedte:	325 mm
(Buitenste) hoofdverpakking lengte:	485 mm
Hoeveelheid per (buitenste) hoofdverpakking:	20 stuk(s)
Bedrijfstemperatuur (T-T):	0 - 65 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Hot-swap:	Ja
S.M.A.R.T. support:	Ja
TRIM support:	Ja
Uitbreidingskaartstandaard:	PCIe 4.0
Data transfer snelheid (max):	64 Gbit/s
Output interface:	M.2