StarTech.com LTSTND Handleiding

StarTech.com Flat panel steun LTSTND

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com LTSTND (2 pagina's) in de categorie Flat panel steun. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 4, 2019

Product Diagram (LTSTND)

Angled View

Part Function

1Top Plate • A platform for a Laptop

2Upper Leg

• Attaches to the Top Plate

• Congurable with three height-adjustment

settings

3Cable-Management

Slots • Organize and route Cables

4Lower Leg • Attaches to the Upper Leg

5Height-Adjustment

Knob

• Secure the and Upper Legs Lower Legs

together

• Can be removed to adjust height settings

Laptop Stand - Height Adjustable

Requirements

• Clean, Flat, and Stable Surface x 1

For the latest requirements please visit: .

www.startech.com/LTSTND

Installation

Assembly

1. Place the , top side down, onto a .Top Plate Clean, Flat, and Stable Surface

Note: The lip on the can overhang o the edge of the for a level Top Plate Surface

installation.

2. Place the onto the . Ensure the in the Upper Legs Top Plate Holes Upper Legs

are aligned with the on the . The slanted portion of the Threaded Posts Top Plate

Upper Legs Top Plate should be aligned with the slanted portion of the .

3. Secure the to the using two for each side. Fasten the Upper Legs Top Plate, Nuts

Nuts Wrench using the . (Figure 1)

Note: Align the outside edges of the with the outside edges of the Upper Legs Top

Plate Nuts before tightening the .

Figure 1

Wrench

Nut

Upper Leg

Top Plate

Threaded

Post

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes

only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to

which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks,

registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related

documents are the property of their respective holders.

Warranty Information

This product is backed by a ve-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

NL: nl.startech.com

IT: it.startech.com

JP: jp.startech.com

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

4. Align the on the with the on the Screw Holes Lower Legs Screw Holes Upper Legs

at the desired height adjustment setting.

5. Insert the through the on the Height-Adjustment Knobs Screw Holes Upper

Legs Screw Holes Lower Legs Height-and into the on the , then hand-tighten the

Adjustment Knob, being careful not to over-tighten.

6. Turn the upright. Laptop Stand Assembly

7. (Optional) Route the through the .Laptop Cables Cable-Management Slots

Operation

Height Adjustment

1. Disconnect the , remove them from the , Laptop Cables Cable-Management Slots

and remove the .Laptop

2. Place the , top side down, on a Laptop Stand Assembly Clean, Flat, and Stable

Surface.

Note: The lip on the can overhang o the edge of the for a level Top Plate Surface

adjustment.

3. Remove the by turning each counterclockwise.Height-Adjustment Knobs Knob

Note: Ensure the are supported while removing the Upper Legs Height Adjustment

Knobs.

4. Align the on the with the on the Screw Holes Lower Legs Screw Holes Upper Legs

at the desired height adjustment setting.

5. Insert the through the on the Height-Adjustment Knobs Screw Holes Upper

Legs Screw Holes Lower Legs Height-and into the on the , then hand-tighten the

Adjustment Knob, being careful not to over-tighten.

6. Turn the upright. Laptop Stand Assembly

Figure 2

Height-Adjustment Knob

Lower Leg

Top Plate

Upper Leg

Product specificaties

Merk:	StarTech.com
Categorie:	Flat panel steun
Model:	LTSTND
Kleur van het product:	Zwart, zilver
Gewicht:	2750 g
Breedte:	357 mm
Diepte:	318 mm
Hoogte:	185 mm
Gewicht verpakking:	3200 g
Breedte verpakking:	337 mm
Diepte verpakking:	420 mm
Hoogte verpakking:	95 mm
In hoogte verstelbaar:	Ja
Maximale gewichtscapaciteit:	20 kg
Certificering:	REACH, CE, RoHS
Materiaal:	Aluminium, Steel
Verstelbaar:	Ja
Type product:	Laptopstandaard
Code geharmoniseerd systeem (HS):	84733080
Hoogte verstelbaarheidsbereik:	185 - 235 mm
Maximale notebook-schermgrootte compatibiliteit:	17 "